TELLUR Dash Patrol DC2 Car Camera User Manual

1. Einleitung

The TELLUR Dash Patrol DC2 is a Full HD 1080P car camera designed to record your driving journeys and provide enhanced security for your vehicle. This manual provides essential information for the proper installation, operation, and maintenance of your device. Please read it carefully before use.

2. Packungsinhalt

Prüfen Sie beim Auspacken, ob alle Artikel vorhanden und in gutem Zustand sind.

• TELLUR Dash Patrol DC2 Car Camera
• Car Mount (Magnetic)
• USB-Kabel
• Autoladegerät

Abbildung: Explosionszeichnung view of the Dash Patrol DC2 showing the camera, magnetic mount, and key features like GPS, Magnetic Charging, Wi-Fi, and Full HD recording.

3. Produktüberschreitungview

Familiarize yourself with the components of your Dash Patrol DC2 camera.

Bild: Vorderseite view of the Dash Patrol DC2, highlighting the camera lens.

Abbildung: Seite view of the Dash Patrol DC2, showing the TF card slot, microphone, and 'M' button.

Bild: Rückseite view of the Dash Patrol DC2, displaying the screen, navigation buttons, USB port, Reset button, and Power button.

Schlüsselkomponenten:

• Kameraobjektiv: Nimmt Videoaufnahmen auftage.
• 2.7-Zoll-Display: Für viewleben footage, Wiedergabe und Menünavigation.
• TF-Karten-Slot: Insert MicroSD card for storage.
• Mikrofon: Records audio (can be disabled in settings).
• 'M'-Taste: Mode button to switch between video, photo, and playback modes.
• Navigationsschaltflächen (Auf/Ab): Zur Menünavigation und für bestimmte Funktionen.
• OK-Taste: Bestätigt die Auswahl und startet/stoppt die Aufnahme.
• Netzschalter: Schaltet das Gerät ein/aus.
• Reset-Taste: For factory reset (use a thin object to press).
• USB-Anschluss: Zur Stromversorgung und Datenübertragung.
• Magnetic Mount Connector: For attaching the camera to the car mount.

4. Einrichtung

4.1 Installing the MicroSD Card

1. Stellen Sie sicher, dass die Kamera ausgeschaltet ist.
2. Insert a Class 10 or higher MicroSD card (up to 64GB, not included) into the TF card slot until it clicks into place.
3. Zum Herausnehmen die Karte vorsichtig nach unten drücken, bis sie herausspringt.

4.2 Montage der Kamera

1. Reinigen Sie die Stelle an Ihrer Windschutzscheibe, an der Sie die Kamera anbringen möchten.
2. Attach the magnetic car mount to the windshield using its adhesive or suction cup. Ensure it does not obstruct your view.
3. Align the camera with the magnetic connector on the mount until it securely attaches.
4. Passen Sie den Kamerawinkel an, um ein klares Bild zu gewährleisten. view der vor uns liegenden Straße.

Image: The Dash Patrol DC2 camera mounted on a car windshield, showing its position relative to the rearview mirror for optimal road visibility.

4.3 Stromversorgung der Kamera

1. Connect the car charger to your vehicle's 12V power outlet (cigarette lighter socket).
2. Connect the other end of the USB cable to the camera's USB port.
3. The camera will automatically power on and begin recording when your vehicle starts. It will power off shortly after the vehicle is turned off.

4.4 Grundeinstellungen

Upon first use, or after a reset, you may need to set the date and time. Navigate through the menu using the Up/Down buttons and confirm with the OK button.

5. Bedienungsanleitung

5.1 Grundlegende Aufnahmefunktionen

The camera automatically starts loop recording when powered on. Older files are overwritten when the memory card is full, except for locked files.

5.2 G-Sensor (Automatic Incident Detection)

The built-in G-sensor detects sudden impacts or collisions. When an event is detected, the current video segment is automatically locked to prevent it from being overwritten during loop recording.

Image: Illustration of the G-sensor function, showing the camera recording and a lock icon appearing when a collision is detected, indicating the video is protected.

5.3 Parking Monitor Function

When enabled, the parking monitor function allows the camera to automatically record when motion or impact is detected while the vehicle is parked and the engine is off. This provides surveillance even when you are away from your vehicle.

Image: Diagram illustrating the parking monitor function, where the dashcam automatically records when motion is detected around a parked car.

5.4 GPS-Funktionalität

The integrated GPS module records your vehicle's speed and location data alongside the video footagDiese Informationen können viewed during playback using compatible software on a computer.

5.5 WLAN-Konnektivität und App

The Dash Patrol DC2 features Wi-Fi connectivity, allowing you to connect to a smartphone app for live view, video playback, and settings adjustment. The compatible app is typically named GoPlus Cam.

1. Laden Sie die GoPlus Cam App aus dem App Store Ihres Smartphones.
2. Turn on the Dashcam.
3. Press and hold the 'Down' button on the camera until the Wi-Fi symbol appears on the screen.
4. On your smartphone, go to Wi-Fi settings and connect to the camera's Wi-Fi network (SSID usually starts with 'TELLUR' or similar).
5. Open the GoPlus Cam app to manage your camera.

Image: Icon for the GoPlus Cam mobile application, used for connecting to the dashcam via Wi-Fi.

6. Wartung

6.1 MicroSD-Kartenverwaltung

• Regularly format the MicroSD card (at least once a month) to ensure optimal performance and prevent data corruption. This can usually be done through the camera's menu settings.
• Tauschen Sie die MicroSD-Karte aus, wenn Sie häufige Fehler oder eine verminderte Leistung feststellen.

6.2 Reinigung

• Use a soft, dry cloth to clean the camera lens and screen. Avoid abrasive materials or chemical cleaners.
• Halten Sie die Kamera frei von Staub und Schmutz.

7. Fehlerbehebung

If you encounter issues with your Dash Patrol DC2, refer to the following common solutions:

8. Spezifikationen

9. Garantie und Support

For warranty information or technical support, please refer to the documentation provided with your purchase or visit the official TELLUR webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.