Einführung
Thank you for choosing Yaheetech Adjustable PU Leather Swivel Bar Stools. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new bar stools. Please read these instructions carefully before use and retain them for future reference.
Wichtige Sicherheitsinformationen
WARNUNG: This product can expose you to chemicals including Di(2-ethylhexyl)phthalate (DEHP) and Lead, which are known to the State of California to cause cancer and birth defects or other reproductive harm. For more information, please visit www.P65Warnings.ca.gov/furniture.
- Stellen Sie vor der Montage sicher, dass alle Teile vorhanden und unbeschädigt sind.
- Do not use the product if any part is missing, damaged, or worn.
- Do not stand on the bar stool.
- Die maximale Tragfähigkeit von 330 Pfund (150 kg) darf nicht überschritten werden.
- Halten Sie Kinder während der Montage vom Produkt fern.
- Immer auf einer ebenen, stabilen Oberfläche verwenden.
Packungsinhalt
Your Yaheetech Bar Stools package should contain the following components for a set of 2 stools:
- 2 x Seat Cushions with Backrest (PU Leather)
- 2 x Gas Lift Cylinders (SGS-certified)
- 2 x Footrests (Chrome-plated metal)
- 2 x Base Plates (Electroplated metal with anti-slip rubber ring)
- Montagezubehör (Schrauben, Inbusschlüssel)
- Bedienungsanleitung
Einrichtung (Montageanleitung)
Assembly is quick and easy, typically taking less than 10 minutes per chair. Follow these steps:
- Komponenten auspacken: Nehmen Sie alle Teile vorsichtig aus der Verpackung und legen Sie sie auf eine saubere, weiche Unterlage, um Kratzer zu vermeiden.
- Attach Footrest to Gas Lift: Slide the footrest ring onto the gas lift cylinder. Ensure it is securely positioned.
- Gaslift in die Basis einsetzen: Place the wider end of the gas lift cylinder into the center hole of the base plate. The anti-slip rubber ring on the base should be facing down.
- Sitz an Gasdruckfeder befestigen: Align the mounting plate on the underside of the seat cushion with the top of the gas lift cylinder. Secure the seat to the gas lift using the provided screws and Allen wrench. Ensure all screws are tightened firmly.
- Wiederholen Sie den Vorgang für den zweiten Stuhlgang: Follow steps 1-4 to assemble the second bar stool.
Bedienungsanleitung
- Höhenverstellung: To adjust the seat height, locate the lever under the seat. While seated, pull the lever up to lower the seat. To raise the seat, stand up and pull the lever up. The gas lift system allows for smooth height adjustments.
- Schwenkfunktion: The bar stools feature a 360-degree swivel function, allowing for easy rotation without moving the base.
- Fußstütze: Utilize the built-in footrest for added comfort and support while seated.
Wartung
- Reinigung: Wipe the PU leather and metal surfaces with a damp Mit einem Tuch abwischen. Vermeiden Sie die Verwendung von scharfen Chemikalien oder Scheuermitteln, da diese die Oberfläche beschädigen können.
- Regelmäßige Kontrollen: Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
- Bodenschutz: The base includes an anti-slip rubber ring to protect your floors. Ensure this ring is clean and intact.
Fehlerbehebung
- Der Hocker wackelt: Check that all assembly screws are securely tightened. Ensure the base is on a flat, even surface.
- Höhenverstellung funktioniert nicht: Verify that the gas lift lever is functioning correctly and not obstructed. Ensure the gas lift cylinder is properly seated in both the base and the seat mechanism.
- Quietschgeräusch: Apply a small amount of silicone lubricant to moving parts, such as the swivel mechanism or gas lift, if squeaking occurs.
Technische Daten
| Technische Daten | 19.5"T x 17"B x 36.5"H |
| Farbe | Rot |
| Marke | Yaheetech |
| Größe | 2er-Set |
| Stil | Modern |
| Sitzhöhe | Adjustable from 21.7 Inches |
| Sitzbreite | 17 Zoll |
| Maximalgewichtsempfehlung | 330 Pfund (150 kg) |
| Rahmenmaterial | Metall |
| Sitzmaterialtyp | Kunstleder (PU-Leder) |
| Montage erforderlich | Ja |
| Artikelgewicht (pro Hocker) | Approximately 15.75 pounds (31.5 pounds for set of 2) |
Garantieinformationen
Yaheetech products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included in your package or contact Yaheetech customer support.
Kundenservice
If you have any questions, concerns, or require assistance with your Yaheetech bar stools, please contact our customer support team. Contact information can typically be found on our official webauf der Website oder auf der Produktverpackung.
