BRESSER Beaufort 5-in-1 Drahtlose Wetterstation Meteorologisches Zentrum Benutzerhandbuch

1. Produktüberschreitungview

The BRESSER Beaufort 5-in-1 Wireless Weather Station Meteorological Center provides comprehensive weather data directly to your home. It includes an indoor display unit and a multi-sensor outdoor unit that measures temperature, humidity, wind speed, wind direction, and rainfall.

Image: The main display unit of the BRESSER Beaufort 5-in-1 Wireless Weather Station, showing indoor and outdoor temperature, humidity, wind data, forecast, barometric pressure, and time.

2. Einrichtung

2.1 Auspacken und Komponentenprüfung

Packen Sie alle Komponenten sorgfältig aus und vergewissern Sie sich, dass die folgenden Teile vorhanden sind:

• Hauptanzeigeeinheit
• 5-in-1 Outdoor Multi-Sensor Unit
• Mounting accessories (pole, base, screws)
• Power adapter for main unit
• Bedienungsanleitung

2.2 Einlegen der Batterie

Hauptanzeigeeinheit: Insert 1x CR2032 battery (not included) into the battery compartment for backup power. Connect the main unit to a power outlet using the provided adapter.

Outdoor Multi-Sensor Unit: Insert 3x AA batteries (not included) into the battery compartment of the outdoor sensor. Ensure correct polarity.

2.3 Platzierung und Montage von Außensensoren

Proper placement of the outdoor sensor is crucial for accurate readings.

• Mount the sensor in an open area, away from obstructions like buildings or trees, to ensure accurate wind and rain measurements.
• Ensure the sensor is mounted level to guarantee accurate rainfall collection and wind direction.
• Orient the wind vane (the arrow) to point North during installation.
• Use the provided mounting pole and base to secure the sensor to a stable surface or pole.

Abbildung: Seite view of the BRESSER 5-in-1 outdoor multi-sensor unit, showing the wind cups, wind vane, and rain collector.

2.4 Erste Synchronisierung

After installing batteries in both units, place them within close proximity. The main display unit will automatically search for and connect to the outdoor sensor. This process may take a few minutes. Once connected, outdoor data will appear on the display.

2.5 Uhrzeit- und Datumseinstellung

The weather station may attempt to synchronize time via RCC (Radio Controlled Clock) signal. If an RCC signal is not available in your region, or if you prefer, you can manually set the time and date using the buttons on the main display unit. Refer to the specific button functions in the Operating section for detailed instructions.

3. Bedienung der Wetterstation

3.1 Anzeige überview

The main display unit presents various weather parameters:

• AUS: Außentemperatur und Luftfeuchtigkeit.
• IN: Raumtemperatur und Luftfeuchtigkeit.
• WIND: Current wind speed and direction, including gust speed.
• VORHERSAGE: Wettervorhersage-Symbole (sonnig, bewölkt, regnerisch usw.).
• BARO: Barometrische Druckmessungen.
• RAINFALL: Tägliche, wöchentliche oder monatliche Niederschlagsmenge.
• ZEIT DATUM: Aktuelle Uhrzeit, Datum und Wochentag.
• BEAUFORT: Beaufort scale indicator for wind force.
• WINDKÜHL: Calculated wind chill temperature.

Bild: Vorderseite view of the BRESSER Beaufort 5-in-1 Wireless Weather Station display, highlighting the various data fields and their arrangement.

3.2 Tastenfunktionen

The display unit features several buttons for navigation and settings:

• GESCHICHTE: View historical data for various parameters.
• MAX MIN: Display maximum and minimum recorded values for temperature, humidity, etc. Press again to clear.
• LICHT: Adjust backlight brightness or activate temporary backlight.
• MODUS EINGESTELLT: Enter settings mode or confirm selections.
• AUF-/AB-Pfeile: Durch Menüs navigieren oder Werte anpassen.

3.3 Alarme einstellen

You can set alarms for specific weather conditions, such as high/low temperature, high wind speed, or heavy rainfall. Enter the alarm setting mode using the MODE/SET button and follow the on-screen prompts to configure your desired alarm thresholds.

3.4 Einheitenauswahl

To change units (e.g., Celsius to Fahrenheit, mph to km/h, inHg to hPa), access the settings menu. Navigate to the unit selection option and choose your preferred measurement units.

4. Wartung

4.1 Batteriewechsel

Replace batteries in the outdoor sensor when the low battery indicator appears on the main display. Due to the outdoor placement, ensure safe access for battery replacement. The main unit's backup battery should be replaced periodically, typically every 1-2 years.

4.2 Reinigung

Periodically clean the outdoor sensor unit to ensure accurate readings. Remove any debris from the rain collector, wind cups, and wind vane. Use a soft, damp cloth for cleaning; avoid abrasive cleaners or solvents. Clean the display unit with a soft, dry cloth.

4.3 Allgemeine Pflege

Ensure the outdoor sensor is securely mounted and free from physical damage. Protect the main display unit from extreme temperatures, direct sunlight, and moisture.

5. Fehlerbehebung

• Kein Display am Hauptgerät: Check power adapter connection and backup battery.
• Keine Daten für den Außenbereich: Ensure outdoor sensor batteries are fresh and correctly installed. Verify both units are within range and attempt re-synchronization (refer to setup instructions). Check for obstructions between units.
• Ungenaue Messwerte: Ensure the outdoor sensor is mounted correctly (level, clear of obstructions, wind vane pointing North). Clean sensors if necessary.
• Time/Date Incorrect: If RCC synchronization fails, manually set the time and date.

6. Spezifikationen

7. Garantie und Support

For warranty information, please refer to the documentation included with your product packaging or visit the official BRESSER website. For technical support or assistance, please contact BRESSER customer service directly through their official channels.