Lepro 40ft RGB LED Strip Lights with Remote Control (Model PR410116-RGB-US)

1. Einleitung

Thank you for choosing Lepro RGB LED Strip Lights. This manual provides detailed instructions for the safe and efficient use of your new LED strip lights. These versatile lights offer a wide range of colors and modes, perfect for enhancing various indoor environments.

Lepro 40ft RGB LED Strip Lights illuminating a modern living room with purple and yellow hues.

Figure 1: Lepro 40ft RGB LED Strip Lights in a living room setting.

2. Lieferumfang

Bitte überprüfen Sie den Packungsinhalt, um sicherzustellen, dass alle Artikel vorhanden sind:

1 x 39.4ft (12m) Non-Waterproof RGB LED Strip
1 x 44-Tasten-IR-Fernbedienung
1 x 24V Power Adapter (US Plug)

3. Sicherheitshinweise

Read all safety instructions before installation and use. Keep this manual for future reference.

Nur zur Verwendung im Innenbereich: This product is designed for indoor use and is not waterproof.
Stromversorgung: Use only the provided 24V power adapter. Using an incorrect power supply may damage the product and void the warranty.
Installationsoberfläche: Für eine optimale Haftung muss die Montagefläche sauber, trocken und glatt sein.
Schneiden des Streifens: Only cut the LED strip at designated cut marks (every 3 LEDs). Cutting elsewhere will damage the strip.
Überhitzung vermeiden: Do not coil the LED strip tightly when powered on, as this can cause overheating.
Kinder und Haustiere: Bewahren Sie das Produkt und seine Bestandteile außerhalb der Reichweite von Kindern und Haustieren auf.

4. Einrichtung und Installation

Befolgen Sie diese Schritte für eine ordnungsgemäße Installation:

Bereiten Sie die Oberfläche vor: Clean the desired installation surface thoroughly to remove dust, oil, or moisture. A clean, dry surface ensures strong adhesion.
Messen und zuschneiden (falls erforderlich): Unroll the LED strip and measure the required length. If shortening is needed, cut the strip only at the designated cut marks, typically indicated by a copper line and a scissor icon, every 3 LEDs.
Bringen Sie den Streifen an: Peel off the backing from the 3M adhesive tape on the back of the LED strip. Carefully press the strip onto the cleaned surface, ensuring firm contact along its entire length.
Secure with Fixing Clips (Optional): For added security, especially on textured surfaces or corners, use the provided fixing clips. Secure them at regular intervals or critical points along the strip.
Strom anschließen: Connect the LED strip to the IR receiver, and then connect the IR receiver to the 24V power adapter. Plug the power adapter into a standard electrical outlet.
Remote aktivieren: Before first use, remove the plastic insulation tab from the battery compartment of the 44-key IR remote control.

Four steps for easy installation: 1. Wipe the surface, 2. Stick the strip light, 3. Cut the exceeded length, 4. Use fixing clips.

Figure 2: Visual guide for LED strip installation steps.

Diagram showing connection of power adapter to LED strip via IR receiver, with a remote control pointing at the sensor. Also shows 3M adhesive and a plastic chip to pull out from the remote.

Figure 3: Connection diagram and remote activation.

Close-up of 3M adhesive tape and white fixing clips for LED strip installation.

Figure 4: 3M Adhesive and Fixing Clips.

5. Bedienungsanleitung

Control your LED strip lights using the included 44-key IR remote control. Ensure the remote is pointed directly at the IR receiver for optimal response.

Image showing the 44-key remote control with buttons for 8 dynamic modes, brightness adjustment, 20 vivid colors, and 6 DIY colors.

Figure 5: 44-Key IR Remote Control Layout.

Fernbedienungsfunktionen:

Ein/Aus: Power button to turn the lights on or off.
Helligkeitsanpassung: Verwenden Sie die ↑ Und ↓ Tasten zum Erhöhen oder Verringern der Helligkeit.
Farbauswahl: Choose from 16 preset static colors, including Red, Green, Blue (RGB), and White.
DIY-Farben: 6 programmable DIY buttons allow you to save your favorite custom color mixes.
- Drücken Sie eine Heimwerken Taste.
- Verwenden Sie die ↑ Und ↓ arrows next to R, G, B to adjust the intensity of each primary color.
- Drücken Sie das gleiche Heimwerken button again to save your custom color.
Modusauswahl: Select from 8 dynamic modes (e.g., Flash, Fade, Jump) to create different lighting effects.
- BLITZ: Jumps between colors.
- FADE3/FADE7: Fades between 3 or 7 colors.
- JUMP3/JUMP7: Jumps between 3 or 7 colors.
- WAGEN: Durchläuft alle Modi.
- SCHNELL LANGSAM: Passt die Geschwindigkeit der dynamischen Modi an.

A woman relaxing on a couch in a living room, using a remote control to change the color of the LED strip lights installed along the ceiling and under the couch.

Figure 6: Remote control in use for ambient lighting.

6. Wartung

Proper maintenance ensures the longevity of your LED strip lights.

Reinigung: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or immerse the strip in water.
Lagerung: Wenn Sie die Lichter über einen längeren Zeitraum lagern, achten Sie darauf, dass sie sauber, trocken und locker aufgerollt sind, um Beschädigungen zu vermeiden.
Vermeiden Sie Bücken: Do not bend the LED strip sharply, especially at the connection points, as this can damage the internal circuitry.

7. Fehlerbehebung

Sollten Sie auf Probleme stoßen, konsultieren Sie bitte die folgenden häufigen Probleme und Lösungen:

Problem	Mögliche Ursache	Lösung
Das Licht geht nicht an.	Netzteil nicht angeschlossen. Remote battery dead or plastic tab not removed. IR receiver blocked.	Ensure all connections are secure and power adapter is plugged in. Remove plastic tab from remote battery. Replace battery if needed. Ensure remote is pointed at the IR receiver without obstruction.
Die Fernbedienung reagiert nicht.	Batterie der Fernbedienung schwach/leer. Remote too far or not aimed at IR receiver.	Ersetzen Sie die Batterie der Fernbedienung. Ensure remote is within range and pointed directly at the IR receiver.
Die Farben sind falsch oder uneinheitlich.	Damaged LED segment. Wackelkontakt.	Check for physical damage on the strip. Verify all connections are firm.

8. Spezifikationen

Besonderheit	Detail
Marke	Lepro
Modellnummer	PR410116-RGB-US
Lichtquellentyp	LED (5050 SMD)
Lichtfarbe	RGB (Red, Green, Blue) + White, 16 Multicolored Options, 6 DIY Colors
Länge	39.4 Fuß (12 m)
Bandtage	24 Volts (Power Adapter)
Wastage	18 Watt (max. kompatibel)
Kontrollmethode	44-Tasten-Infrarot-Fernbedienung
Besonderheit	Color Changing, Dimmable, 8 Dynamic Modes
Verwendung im Innen- und Außenbereich	Nur für den Innenbereich
Material	Kupfer, Kunststoff
Artikelgewicht	9.6 Unzen
Farbwiedergabeindex (CRI)	85.00

Figure 7: ETL Listed 24V Power Adapter.

9. Garantie und Support

Lepro products are designed for reliability and performance. For specific warranty details and customer support, please refer to the warranty card included with your product or visit the official Lepro webWebsite.

Kontaktinformationen:

WebWebsite: www.lepro.com (Bitte überprüfen Sie die offizielle Website.) web(Die aktuellsten Kontaktinformationen finden Sie auf der Website.)
E-Mail: Siehe Produktverpackung oder webWebsite.

Lepro PR410116-RGB-US

Lepro 40ft RGB LED Strip Lights User Manual