Einführung
This manual provides instructions for the safe installation, operation, and maintenance of your EGLO Palmaves 1 LED Ceiling Light. Please read these instructions carefully before installation and retain them for future reference. This LED ceiling light features dimmable functionality, adjustable color temperature from warm white to cool white, RGB color options, a night light mode, and is controlled via an included remote.
Image: The EGLO Palmaves 1 LED Ceiling Light, featuring two interconnected rings, installed on a ceiling in a modern living space.
Setup und Installation
Installation should be performed by a qualified electrician in accordance with local wiring regulations. Always ensure the main power supply is disconnected before commencing any electrical work.
Packungsinhalt:
- EGLO Palmaves 1 LED Ceiling Light fixture
- Fernbedienung
- Montagezubehör (Schrauben, Dübel)
- Montageanleitung (dieses Dokument)
Montage des Geräts:
- Sicherheit geht vor: Turn off the power at the main circuit breaker before installation.
- Montagefläche vorbereiten: Markieren Sie die Bohrpunkte an der Decke, indem Sie die Montagehalterung der Leuchte als Schablone verwenden.
- Bohrlöcher: Bohren Sie an den markierten Stellen Löcher und setzen Sie geeignete Dübel ein.
- Verkabelung anschließen: Connect the household electrical wires to the fixture's terminal block. Ensure correct polarity (Live, Neutral, Earth).
- Sichere Befestigung: Attach the mounting bracket to the ceiling using screws. Secure the light fixture to the mounting bracket.
- Strom wiederherstellen: Sobald die Installation abgeschlossen und alle Verbindungen sicher hergestellt sind, schalten Sie die Stromversorgung am Hauptschalter wieder ein.
Einsetzen der Batterien in die Fernbedienung:
The remote control requires 2 AAA batteries (not included). Open the battery compartment on the back of the remote and insert the batteries, observing the correct polarity (+/-). Close the compartment securely.
Bedienungsanleitung
The EGLO Palmaves 1 LED Ceiling Light is controlled using the provided 2.4G RF remote control. Ensure the remote has fresh batteries and is within range of the light fixture.
Image: The white remote control for the EGLO Palmaves 1 LED Ceiling Light, showing buttons for power, brightness, color temperature, night light, and timer functions.
Fernbedienungsfunktionen:
- EIN/AUS: Drücken Sie , um das Licht ein- oder auszuschalten.
- B- / B+: Adjust brightness levels. B- decreases brightness, B+ increases brightness.
- WW (Warmweiß): Adjusts the color temperature towards warmer tones (e.g., 3000 Kelvin).
- CW (Kaltweiß): Adjusts the color temperature towards cooler tones (e.g., 6500 Kelvin).
- Nachtlichtmodus: Activates a low-brightness setting (approximately 10% intensity) suitable for night use.
- Timer: Activates a 30-minute auto-off function. The light will turn off automatically after 30 minutes.
- RGB: This model supports RGB color changing. Specific buttons or combinations on the remote will cycle through or select various RGB colors. Refer to the remote's markings for exact RGB control.
Pflege und Wartung
Proper care ensures the longevity and optimal performance of your EGLO Palmaves 1 LED Ceiling Light.
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Verwenden Sie ein weiches, trockenes oder leicht angefeuchtetes Tuch.amp cloth to wipe the surface of the fixture. Avoid abrasive cleaners, solvents, or harsh chemicals, as these can damage the finish and electronic components.
- LEDs: The LED light source is integrated and not user-replaceable. Do not attempt to disassemble the light fixture to replace LEDs.
- Allgemeine Inspektion: Überprüfen Sie die Leuchte regelmäßig auf Beschädigungen oder lose Verbindungen. Sollten Sie Mängel feststellen, schalten Sie die Stromzufuhr ab und wenden Sie sich an einen qualifizierten Elektriker.
Fehlerbehebung
If you encounter issues with your EGLO Palmaves 1 LED Ceiling Light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | Keine Stromversorgung. Die Batterien der Fernbedienung sind leer. Fernbedienung nicht gekoppelt. | Prüfen Sie den Sicherungsautomaten und den Wandschalter. Replace remote control batteries (2 AAA). Refer to remote control pairing instructions (if applicable, usually involves turning light on/off and pressing a button on remote within seconds). |
| Light does not respond to remote control. | Remote control batteries are low/dead. Hindernis zwischen Fernbedienung und Licht. Fernbedienung nicht gekoppelt. | Ersetzen Sie die Batterien der Fernbedienung. Stellen Sie sicher, dass die Leuchte freie Sicht hat. Re-pair the remote control with the light. |
| Light flickers or has inconsistent brightness. | Instabile Stromversorgung. Wackelkontakt. | Consult a qualified electrician to check the electrical supply. Disconnect power and check wiring connections (only by a qualified person). |
Technische Daten
Detailed technical specifications for the EGLO Palmaves 1 LED Ceiling Light.
Image: A technical diagram illustrating the dimensions of the EGLO Palmaves 1 LED Ceiling Light, showing diameters of 29 cm and 39 cm, and a height of 7 cm.
| Besonderheit | Detail |
|---|---|
| Modellnummer | 75555 |
| Abmessungen (L x B x H) | 45 x 30 x 12 cm (overall); Large element: Ø 39 cm; Small element: Ø 29 cm; Height: 7 cm |
| Gewicht | 994 Gramm |
| Stromquelle | AC Power (240 Volts) |
| Wastage | 21.6 Watt (max.) |
| Lichtstrom | 2940 Lumen (max.) |
| Farbtemperatur | 3000 K (Warmweiß) – 6500 K (Kaltweiß), RGB |
| Dimmbar | Ja |
| Kontrollmethode | Remote Control (2 AAA batteries required) |
| Material | Aluminum, Alloy Steel, Plastic |
| Vorrichtungsform | Runde Deckenleuchte |
| Installationstyp | Unterputz |
| Innen-/Außenbereich | Nur für den Innenbereich |
| Energieklasse | E |
| Ursprungsland | China |
Garantieinformationen
The EGLO Palmaves 1 LED Ceiling Light comes with a limited warranty. For specific details regarding the warranty period, coverage, and terms, please refer to the warranty documentation provided with your purchase or contact EGLO customer service. Keep your proof of purchase for warranty claims.
Kundenservice
If you require further assistance, have questions not covered in this manual, or need to report a defect, please contact EGLO customer service. Contact information can typically be found on the EGLO webauf der Website oder auf Ihrer Produktverpackung.
WebWebsite: www.eglo.com