Scheppach SBP250 Submersible Pump User Manual

Einführung

Thank you for choosing the Scheppach SBP250 Submersible Pump. This manual provides essential instructions for the safe and efficient operation, setup, and maintenance of your pump. Designed for clean water transfer from rain barrels or cisterns, it features a powerful 250W motor, a capacity of 6500 liters per hour, and an automatic float switch for convenient use. Please read these instructions carefully before operating the device and keep them for future reference.

Sicherheitshinweise

Beachten Sie stets die folgenden Sicherheitsvorkehrungen, um Verletzungen oder Schäden zu vermeiden:

• Stellen Sie sicher, dass das Netzteil den Angaben auf dem Typenschild der Pumpe entspricht.
• Betreiben Sie die Pumpe niemals mit einem beschädigten Netzkabel oder Stecker.
• Heben oder tragen Sie die Pumpe nicht am Netzkabel.
• Halten Sie Kinder und Unbefugte vom Arbeitsbereich fern.
• Vor jeglichen Wartungs- oder Reinigungsarbeiten muss die Pumpe vom Stromnetz getrennt werden.
• The pump is designed for clean water only. Do not use it for flammable, corrosive, or explosive liquids.
• Um eine Überhitzung zu vermeiden, muss die Pumpe während des Betriebs vollständig eingetaucht sein.
• Avoid running the pump dry.

Produkt überview

The Scheppach SBP250 submersible pump is designed for efficient water transfer. Familiarize yourself with its main components:

• Pumpenkörper: Durable plastic housing protecting the motor and internal components.
• Motor: Powerful 250W motor for efficient water pumping.
• Schwimmerschalter: Automatically turns the pump on and off based on water level.
• Entladungsanschluss: Standard 1¼" connection for hoses.
• Stromkabel: 10-meter cable for extended reach, designed to be plugged outside the wet area.
• Handhaben: Integrated handle for easy transport and lowering/raising the pump.

Aufstellen

Follow these steps to set up your submersible pump:

1. Auspacken: Carefully remove the pump from its packaging. Check for any signs of damage.
2. Schlauchanschluss: Attach a suitable discharge hose (not included) to the 1¼" discharge connection. Ensure a tight and secure fit to prevent leaks.
3. Positionierung der Pumpe:

   

   Place the pump on a stable, level surface in the water source (e.g., rain barrel, cistern). Ensure the pump is fully submerged and not resting on mud or debris that could block the intake. The float switch must be able to move freely to ensure automatic operation.
4. Stromanschluss: Ensure your hands are dry. Plug the 10-meter power cable into a grounded electrical outlet. The outlet should be located outside the wet area.

Betrieb

The SBP250 pump operates automatically via its float switch:

1. Automatische Operation: Once plugged in and submerged, the pump will automatically start when the water level rises and lifts the float switch. It will stop when the water level drops and the float switch lowers.
2. Manuelle Überschreibung (falls zutreffend): Some models allow the float switch to be fixed in an 'up' position for continuous operation. Refer to the specific instructions for your model if this feature is desired. For the SBP250, ensure the float switch can move freely for standard automatic operation.
3. Überwachung: Periodically check the pump's operation and the water level. Ensure the discharge hose is clear and directing water as intended.

Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihrer Pumpe:

• Reinigung: After each use, especially if pumping slightly dirty water, rinse the pump thoroughly with clean water. Remove any debris that may have accumulated around the intake screen.
• Inspektion: Regularly inspect the power cable and plug for any damage. Check the discharge connection for wear or leaks.
• Winterlager: If storing the pump in freezing temperatures, ensure all water is drained from the pump and hose to prevent damage from ice expansion. Store in a dry, frost-free location.
• Keine vom Benutzer zu wartenden Teile: The motor and internal components are not user-serviceable. Do not attempt to open the pump housing.

Fehlerbehebung

Hier sind einige häufige Probleme und ihre Lösungen:

Technische Daten

Garantie und Support

Scheppach products are manufactured to high-quality standards. For warranty information or technical support, please refer to the warranty card included with your purchase or visit the official Scheppach website. Please have your model number (SBP250) and purchase details ready when contacting support.

For further assistance, you may contact Scheppach customer service directly. Contact details can typically be found on the manufacturer's webWebsite oder in der Produktverpackung.