Cisco Catalyst 9200L C9200L-48T-4G-E 48-Port Data 4x1G Uplink Switch User Manual

1. Einleitung

This manual provides essential information for the installation, operation, and maintenance of the Cisco Catalyst 9200L C9200L-48T-4G-E 48-Port Data 4x1G Uplink Switch. The Cisco Catalyst 9200L Series switches extend the power of intent-based networking and Catalyst 9000 hardware and software innovation to a broader set of deployments. With its family pedigree, Catalyst 9200L Series switches offer uncompromised simplicity without sacrificing security, always-on quality, and network resiliency.

Please read this manual thoroughly before using the device to ensure proper setup and safe operation. Keep this manual for future reference.

2. Sicherheitshinweise

Beachten Sie die folgenden Sicherheitsvorkehrungen, um Verletzungen und Schäden am Gerät zu vermeiden:

• Elektrische Sicherheit: Stellen Sie sicher, dass die Stromquelle mit der Lautstärke übereinstimmttage requirements of the switch. Use only the provided power cord or an approved equivalent. Do not operate the switch with a damaged power cord or plug.
• Erdung: Um Stromschläge zu vermeiden, ist es wichtig, dass der Schalter ordnungsgemäß geerdet ist.
• Belüftung: Do not block ventilation openings. Ensure adequate airflow around the switch to prevent overheating.
• Umfeld: Operate the switch in a clean, dry environment within the specified temperature and humidity ranges. Avoid exposure to direct sunlight, heat sources, or excessive moisture.
• Handhabung: Handle the switch with care. Avoid dropping or subjecting it to strong impacts.
• Wartung: Do not attempt to service the switch yourself. Refer all servicing to qualified service personnel.

3. Packungsinhalt

Verify that your package contains the following items. If any item is missing or damaged, contact your supplier.

• Cisco Catalyst 9200L C9200L-48T-4G-E Switch
• Netzkabel
• Rack-mount Kit (optional, may vary by package)
• Console Cable (optional)
• Dokumentation (Schnellstartanleitung, Sicherheitshinweise)

4. Körperliche Übergriffeview

This section describes the front panel components of the Cisco Catalyst 9200L C9200L-48T-4G-E switch.

Abbildung 4.1: Front Panel of Cisco Catalyst 9200L C9200L-48T-4G-E Switch

The image displays the front panel of the Cisco Catalyst 9200L C9200L-48T-4G-E switch. It features 48 RJ45 Ethernet ports for data connectivity, arranged in multiple rows. To the right, there are four 1 Gigabit SFP uplink ports. Various status indicator LEDs are visible above the ports, along with a USB console port and a USB Type-A port. The overall chassis is silver-gray.

4.1 Komponenten der Vorderseite

• 48 x 10/100/1000BASE-T-Anschlüsse: These RJ45 ports provide data connectivity for network devices.
• 4 x 1G SFP Uplink Ports: These ports are used for high-speed connections to other network devices or the core network.
• Status-LEDs: Indicators for System Status, PoE Status (if applicable), Port Status, and Stack Status. Refer to the LED indicator section for detailed descriptions.
• USB Console Port (Mini-B): Used for local management and configuration via a console cable.
• USB-Typ-A-Port: Can be used for external storage or software upgrades.

5. Einrichtung

5.1 Rackmontage (optional)

If your package includes a rack-mount kit, follow these steps to install the switch in a standard 19-inch equipment rack:

1. Attach the rack-mount brackets to the sides of the switch using the provided screws.
2. Richten Sie den Schalter an den Rack-Pfosten aus und befestigen Sie ihn mit geeigneten Rack-Schrauben.
3. Ensure the switch is level and securely fastened.

5.2 Stromversorgung anschließen

1. Connect the provided power cord to the AC power receptacle on the rear panel of the switch.
2. Stecken Sie das andere Ende des Netzkabels in eine geerdete Steckdose.
3. The switch will power on automatically. Observe the System LED for boot-up status.

5.3 Erste Netzwerkverbindung

1. Connect an Ethernet cable from your computer to any of the 10/100/1000BASE-T ports on the switch for initial configuration, or use the console port.
2. For console access, connect a console cable from your computer's serial port (or USB-to-serial adapter) to the USB console port on the switch. Configure your terminal emulation software (e.g., PuTTY, Tera Term) with the following settings: 9600 baud, 8 data bits, no parity, 1 stop bit, no flow control.
3. Connect network devices (servers, workstations, access points) to the remaining 10/100/1000BASE-T ports using standard Ethernet cables.
4. Connect uplink ports (SFP) to your core network or other switches using appropriate transceivers and fiber optic cables, or copper cables if using SFP copper modules.

6. Bedienung des Schalters

6.1 Power On and Boot Sequence

Once power is connected, the switch will automatically begin its boot sequence. The System LED will cycle through various states (e.g., amber, green) indicating the boot process. A solid green System LED typically indicates successful boot-up and operational status.

6.2 LED-Anzeigen

Die LEDs auf der Vorderseite liefern Statusinformationen in Echtzeit:

• System-LED:
  • Durchgängig grün: Das System funktioniert normal.
  • Grün blinkend: System is booting or performing diagnostics.
  • Bernstein: System fault or error.
• Port Status LEDs (per RJ45 port):
  • Durchgängig grün: Verbindung hergestellt.
  • Grün blinkend: Aktivität im Hafen.
  • Aus: Kein Link oder Port deaktiviert.
• SFP Uplink Port LEDs: Similar to RJ45 port LEDs, indicating link and activity for the SFP modules.

6.3 Grundkonfiguration

Initial configuration is typically performed via the console port or a web interface (if enabled and configured). Refer to the Cisco IOS XE documentation for detailed configuration commands and procedures. Common initial tasks include:

• Setting hostname and basic network parameters (IP address, subnet mask, default gateway).
• Configuring user accounts and passwords.
• Enabling management interfaces (Telnet, SSH, HTTP/HTTPS).
• Configuring VLANs and port assignments.

7. Wartung

7.1 Reinigung

Um eine optimale Leistung zu gewährleisten und die Lebensdauer Ihres Switches zu verlängern:

• Periodically clean the exterior of the switch with a soft, dry, lint-free cloth.
• Ensure ventilation openings are free from dust and debris. Use compressed air to gently clear dust if necessary, holding the can upright to prevent propellant discharge.
• Verwenden Sie keine flüssigen oder Aerosolreiniger direkt am Schalter.

7.2 Firmware-Updates

Überprüfen Sie regelmäßig den Cisco-Support. website for the latest firmware updates. Keeping your switch's firmware up-to-date ensures optimal performance, security, and access to new features. Follow Cisco's official documentation for firmware upgrade procedures to avoid potential issues.

8. Fehlerbehebung

Dieser Abschnitt bietet Lösungen für häufig auftretende Probleme.

For more advanced troubleshooting, consult the official Cisco documentation or contact Cisco support.

9. Spezifikationen

10. Garantie und Support

This product is a renewed item. Warranty and support terms may differ from new products. Please refer to the specific warranty information provided by the seller (e.g., Amazon Renewed Guarantee) at the time of purchase.

For technical support related to the Cisco IOS XE software or hardware functionality, it is recommended to consult Cisco's official documentation and support resources. If the product was purchased through a reseller, contact them for initial support inquiries.

Cisco-Support WebWebsite: https://www.cisco.com/c/en/us/support/index.html