Ascaso Dream PID Espressomaschine – Benutzerhandbuch

1. Einleitung

Welcome to the user manual for your Ascaso Dream PID Espresso Machine. This guide provides essential information for setting up, operating, maintaining, and troubleshooting your machine to ensure you achieve professional-quality espresso results at home. The Ascaso Dream PID combines a stunning retro aesthetic with advanced features for the home barista.

Abbildung 1.1: Vorderseite view of the Ascaso Dream PID Espresso Machine in Anthracite color.

2. Hauptmerkmale

The Ascaso Dream PID is equipped with several features designed to enhance your espresso brewing experience:

• Electronic Group Temperature Control: Digitally displayed PID temperature control adjustable in one-degree increments for precise brewing.
• Adjustable OPV (Over Pressure Valve): Allows for fine-tuning of extraction pressure.
• Electronic Steam Control: Features an advanced no-burn steam wand for consistent milk frothing.
• Volumetric Programmable Settings: Customize pre-infusion, single shot, double shot, and auto-standby for consistent results.
• Quality Build & Materials: Manufactured with an aluminum body and treated with high-quality varnish for durability and vibrant finish.
• Powerful Steam and Clean Hot Water: New aluminum & stainless steel thermoblock group ensures continuous steam and fresh water for every shot.
• Professioneller Siebträger: Includes a 58mm professional portafilter with a real walnut wood handle.
• Umfangreiches Zubehör: Comes with 5 professional baskets (2 traditional, 2 pressurized, 1 monodose ESE), 1 stainless steel tamper, and 1 blank basket for backflushing.

3. Installationsanleitung

3.1 Auspacken und erste Inspektion

Carefully remove the machine from its packaging. Inspect for any signs of damage. Keep all packaging materials for future transport or storage.

Figure 3.1: The Ascaso Dream PID Espresso Machine partially removed from its packaging.

Figure 3.2: The Ascaso Dream PID Espresso Machine fully removed from its box, ready for setup.

3.2 Füllen des Wassertanks

Fill the removable water tank with fresh, low-mineral content water. Avoid using distilled or demineralized water as it can damage the machine. Ensure the tank is properly seated in its compartment.

Abbildung 3.3: Nahaufnahme view of the transparent water tank, showing its position on the side of the machine.

3.3 Initial Power On and Priming the Pump

Before first use, or after the machine has been drained, it is critical to prime the pump. This ensures water flows correctly through the system and prevents damage.

1. Stellen Sie sicher, dass der Wassertank gefüllt ist.
2. Place a cup under the group head.
3. Schalten Sie die Maschine mit dem Hauptschalter ein.
4. During initial heat-up, none of the switches function until the pilot light has stopped flashing and the group is up to temperature.
5. Once heated, simply press the coffee button down with no portafilter in place.
6. Open the steam valve. Water should flow freely from the group head and steam wand.
7. Approximately ½ tank of water should be dispensed from the machine during priming.
8. Close the steam valve and release the coffee button.

4. Bedienungsanleitung

4.1 Programmiereinstellungen

The PID system allows for precise control over various brewing parameters. To access programming functions, hold down the left and right buttons for 3 seconds. When programming, after selecting a value or setting option, wait three seconds for the setting to confirm. The display will switch to the main programming menu.

• Select Temperature Scale (Ud): Press the left button until you reach "Ud" to set the unit function (Celsius/Fahrenheit). Press the right button to choose your preferred scale.
• Select Group Temperature: Press the left button once to access the group temp function. Use the left or right button to adjust the temperature up/down. The machine is preset to 100 Celsius. The espresso temperature should be about 93 Celsius (198 degrees Fahrenheit).
• Select Pre-Infusion Time (Pr): Press the left button until you reach "Pr" to set pre-infusion time. Press the right button to choose between 0, 1, 2, 3, 4, or 5 seconds. Recommendation: starting with 3 seconds. Experiment with 1-5 to see what works best for you.
• Select Chronometer Display (Cr): Press the left button until you reach "Cr" to set the chronometer function. Press the right button to turn OFF/ON. This allows you to see your espresso shot time, which is helpful for dialing in your espresso.
• Select Standby Mode (OFF): Press the left button until you reach "OFF" to set the machine to stand-by. Press the right button to choose between 0, 5 hours, 2 hours, 1 hour or OFF. This will allow the machine to go into a low power mode after a set time. Your machine will stay warm, but not hot.

Refer to Video 3.4 for visual guidance on programming settings.

4.2 Zubereitung von Espresso

Achieving the perfect espresso shot requires attention to detail in dosing and tamping.

1. If using ground coffee, dose 7 grams for a single shot or 14 grams for a double shot.
2. Level the coffee and firmly tamp.
3. If using pods, place the pod in the pod basket with the smooth side facing up.
4. Setzen Sie den Siebträger in den Gruppenkopf ein und verriegeln Sie ihn.
5. Stellen Sie Ihre Tasse(n) unter die Ausläufe des Siebträgers.
6. Hold the coffee toggle switch upward for desired single cup length or downward for double cup length.
7. We recommend starting with 25-30 seconds extraction time. Experiment with your grind and coffee dose to find what works best for you.

4.3 Aufschäumen von Milch

The powerful steam wand allows you to create perfectly frothed milk for lattes and cappuccinos.

1. Fill a milk pitcher with cold milk, approximately to the bottom of the spout.
2. Press the steam toggle switch down to activate the steam pump. The pump will make a surging or knocking sound once the machine has reached steaming temperature.
3. Open the steam valve for 2-3 seconds to purge any condensed water from the wand, then close.
4. Submerge the steam wand approximately 1/2 inch into the milk.
5. Reopen the steam valve to start steaming.
6. Keep the wand submerged until desired foam is reached and the milk pitcher is too hot to touch.
7. Schließen Sie das Dampfventil und nehmen Sie den Krug heraus.
8. Wischen Sie die Dampfdüse sofort mit einem Tuch ab.amp Tuch, um zu verhindern, dass Milchreste eintrocknen.

Refer to Video 4.1 for a demonstration of milk steaming.

5. Wartung und Reinigung

5.1 Cleaning the System (Purging/Backflushing)

Regular purging and backflushing are essential for maintaining optimal performance and hygiene.

1. After each use, we recommend purging the machine for five seconds by pressing the coffee button with an empty portafilter in place.
2. For backflushing, use the included blank basket in the portafilter. Consult the full user guide for detailed backflushing instructions and recommended frequency.

Refer to Video 3.4 for a demonstration of cleaning the system.

5.2 Regelmäßige Reinigung

• Tropfschale: Leeren und reinigen Sie die Tropfschale täglich, um ein Überlaufen und Bakterienwachstum zu verhindern.
• Exterieur: Wischen Sie die Außenseite der Maschine mit einem weichen, fusselfreien Tuch ab.amp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reinigungsmittel, die die Oberfläche beschädigen könnten.
• Siebträger und Körbe: Clean the portafilter and baskets after each use to remove coffee grounds and oils.

6. Fehlerbehebung

This section addresses common issues you might encounter with your espresso machine. For more complex problems, please contact customer support.

7. Technische Daten

Figure 7.1: Product dimensions of the Ascaso Dream PID Espresso Machine.

8. Garantie und Support

Ascaso stands behind the quality of its products:

• 12-Monatsgarantie: All products are guaranteed against defects caused by faulty workmanship and materials for twelve months of domestic use from the date of purchase.
• 5 Jahr Garantie: A special 5-year warranty is provided on all thermoblock boilers and groups.

For technical support, warranty claims, or any questions not covered in this manual, please visit the official Ascaso USA webBesuchen Sie die Website oder kontaktieren Sie den Kundendienst. Bewahren Sie Ihren Kaufbeleg zur Überprüfung der Garantie auf.

Besuchen Sie auch die Ascaso Store on Amazon für weitere Informationen und Ressourcen.