1. Einleitung
The HaiweiTech HHD-101 is a versatile H.265/H.264 4K Video Audio Decoder designed for various professional applications, including advertisement displays, video encoding, and IP camera decoding. It supports a wide range of IP protocols such as RTMP, RTSP, RTP, HTTP, HLS, and UDP, and offers both HDMI (up to 4K@30FPS) and CVBS/BNC outputs. This manual provides comprehensive instructions for the setup, operation, and maintenance of your HHD-101 decoder.
2. Sicherheitshinweise
- Ensure the device is powered by a 12V 2A power supply. Using an incorrect power supply may damage the unit.
- Das Gerät darf weder Wasser, Feuchtigkeit noch extremen Temperaturen ausgesetzt werden.
- Vermeiden Sie es, das Gerät direktem Sonnenlicht oder in der Nähe von Wärmequellen auszusetzen.
- Versuchen Sie nicht, das Gerät selbst zu öffnen oder zu reparieren. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.
- Sorgen Sie für eine ausreichende Belüftung rund um das Gerät, um eine Überhitzung zu vermeiden.
- Vor der Reinigung oder dem Transport des Geräts die Stromzufuhr unterbrechen.
3. Packungsinhalt
Please check the package contents upon unpacking. If any items are missing or damaged, contact your vendor immediately.
- HaiweiTech HHD-101 Decoder Unit
- 12V Netzteil
- Benutzerhandbuch (dieses Dokument)
4. Produktüberschreitungview
Familiarize yourself with the various ports and indicators on the HHD-101 decoder.
Abbildung 4.1: Vorderseiteview of HHD-101 Decoder.
Abbildung 4.2: Rückseiteview of HHD-101 Decoder.
Figure 4.3: Detailed Port Diagram and Descriptions.
Portbeschreibungen:
- LAN (Ethernet port): Used for network connection. Configuration of the IP gateway may be required for normal operation.
- LED-Anzeigen:
- Red: Power ON
- Green: Network activity
- RST (Zurücksetzen): Press and hold the RST button until the green LED light turns off to reset the device.
- AV OUT (CVBS out): Composite-Video-Ausgang.
- HDMI OUT (HDMI out): High-Definition Multimedia Interface-Ausgang.
- BNC OUT (BNC out): BNC-Anschluss für Videoausgang.
- RS485: Serial communication port (GEN, IO-1, IO-2, 485A, 485B).
- Eingangsleistung: 12V 2A DC power input.
5. Einrichtung
Follow these steps to set up your HHD-101 decoder:
- Strom anschließen: Connect the provided 12V 2A power adapter to the "Power In" port (8) on the rear panel of the decoder. Plug the adapter into a power outlet. The red LED indicator should illuminate.
- Netzwerkverbindung: Connect an Ethernet cable from your network router or switch to the "LAN" port (1) on the front panel. The green LED indicator should illuminate, indicating network activity.
- Videoausgangsanschluss:
- For HDMI output: Connect an HDMI cable from the "HDMI OUT" port (5) to your display device (e.g., TV, monitor).
- For CVBS/BNC output: Connect a BNC cable from the "BNC OUT" port (6) or an AV cable from the "AV OUT" port (4) to your display device.
- Audio Output (if applicable): If using AV OUT, audio will be carried through the composite cable. For HDMI, audio is embedded in the HDMI signal.
- RS485 Connection (Optional): If required for control or data transmission, connect your RS485 devices to the RS485 terminal block (7).
Once all connections are made, the device is ready for configuration and operation.
6. Bedienungsanleitung
The HHD-101 decoder is designed to receive and decode various IP video streams. Operation typically involves configuring the decoder via its web interface to receive the desired stream.
6.1. Zugriff auf die Web Schnittstelle
- Ensure the decoder is connected to your network as described in the Setup section.
- Find the IP address of the decoder. This can often be done using a network scanning tool or by checking your router's connected devices list. The default IP address is typically provided in the separate software utility or quick start guide.
- Öffnen Sie ein web Browser auf einem Computer, der mit demselben Netzwerk verbunden ist.
- Enter the decoder's IP address into the browser's address bar and press Enter.
- Log in using the default username and password (refer to the quick start guide or contact support if unknown).
6.2. Configuring IP Stream Decoding
Innerhalb der web interface, you will find options to configure the input stream. The HHD-101 supports multiple protocols:
Figure 6.1: Supported IP Protocols for HHD-101 Decoder.
- Navigate to the "Input Settings" or "Stream Configuration" section.
- Select the desired protocol (e.g., RTMP, RTSP, HLS, UDP).
- Enter the source IP address or URL of the video stream you wish to decode.
- Configure any additional parameters such as port numbers, authentication credentials, or specific stream IDs as required by your source.
- Save the settings. The decoder should begin receiving and outputting the video stream to the connected display.
6.3. Mehr-View Dekodierung
The HHD-101 supports decoding up to 4 channels for multi-view display. Consult the web interface documentation for specific instructions on configuring multi-view layouts and switching between sources.
6.4. Proprietary Protocol (P-P)
For ultra-low latency point-to-point transmission, the HHD-101 decoder can be used with Haiwei proprietary protocol encoders. This solution is available only when using both HaiweiTech encoders and decoders.
Figure 6.2: Typical System Diagram with HaiweiTech Encoder and Decoder.
7. Wartung
- Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reiniger oder Sprays.
- Belüftung: Ensure the ventilation slots are clear of dust and obstructions to maintain proper airflow.
- Firmware-Updates: Periodically check the HaiweiTech webBesuchen Sie die Website oder wenden Sie sich an den Support, um verfügbare Firmware-Updates zu erhalten und so eine optimale Leistung und den Zugriff auf neue Funktionen zu gewährleisten.
- Lagerung: Wenn Sie das Gerät über einen längeren Zeitraum lagern, trennen Sie es vom Stromnetz und bewahren Sie es an einem kühlen, trockenen Ort auf.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| No power (Red LED off) | Netzteil nicht angeschlossen oder defekt; Problem mit der Steckdose. | Check power adapter connection. Try a different power outlet. Ensure 12V 2A power supply is used. |
| No network connection (Green LED off/flashing irregularly) | Ethernet cable disconnected or faulty; incorrect IP configuration; network issue. | Check Ethernet cable connection. Verify network settings and IP address. Restart router/switch. |
| Kein Videoausgang | Incorrect input stream URL/settings; display device not selected correctly; faulty HDMI/AV/BNC cable; display resolution incompatibility. | Verify stream URL and protocol in web interface. Ensure correct input is selected on your display. Try a different cable. Check if output resolution is supported by display. |
| Video stuttering or freezing | Insufficient network bandwidth; unstable source stream; decoder overload. | Check network speed and stability. Verify source stream quality. Reduce the number of simultaneous decoding channels if applicable. |
| Kein Zugriff möglich web Schnittstelle | Falsche IP-Adresse; Netzwerkverbindungsproblem; Firewall blockiert den Zugriff. | Confirm decoder's IP address. Ensure computer is on the same subnet. Temporarily disable firewall on computer. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | HHD-101 |
| Eingang | Up to 4 (multi-view) Channel H.264/H.265 IP (RTMP/RTSP/RTP/HTTP/HLS/UDP), MPEG1, MPEG2, MPEG4, SL hyperlink (P-P), VP8/VP9/AVS/AVS+ |
| Ausgabe | 1x HDMI (up to 4096*2160P 30FPS), 1 channel CVBS/BNC, RS485 out |
| Unterstützte Lösungen | 4096*2160 30/25/24, 3840*2160 30/25/24, 1080P 60/50/30/25/24, 1080I 60/50, 720P 60/50/25/24, 576P 50 |
| Konnektivitätstechnologie | HDMI |
| Kompatible Geräte | Fernsehen |
| Verpackungsabmessungen | 10.83 x 8.46 x 3.15 Zoll |
| Artikelgewicht | 2.2 Pfund (ca. 1 Kilogramm) |
| Hersteller | HaiweiTech |
10. Garantie und Support
For warranty information, please refer to the documentation provided at the time of purchase or visit the official HaiweiTech website. For technical support, additional manufacturing services (SDK/API, IP finder/Video management platform/IOS Android APP), solution analysis, or OEM services, please contact HaiweiTech directly. Contact details are typically available on the manufacturer's website or through your vendor.
Note: Haiwei proprietary protocol based ultra low latency point to point transmission solution is available with the decoder only. Additional manufacturing Services:SDK/API,IP finder/Video management platform/IOS Android APP,Solution analyze,OEM(more detail:hansen(at)hwsxtec(.)com)
