Ergotron 45-647-216

Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm User Manual

Model: 45-647-216 | Brand: Ergotron

1. Einleitung

Thank you for choosing the Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm. This monitor arm is designed to provide robust support and flexible positioning for large, curved ultrawide monitors, enhancing your ergonomic setup and reclaiming valuable desk space. Please read this manual thoroughly before installation and use to ensure safe and optimal performance.

2. Lieferumfang

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

  • HX Desk Monitor Arm with HD Pivot (White)
  • Verlängerung
  • Schreibtisch Clamp
  • Tüllenhalterung
  • Montagezubehör
Ergotron HX Monitor Arm components including arm, extension, desk clamp, grommet mount, and various screws and tools.

Figure 2.1: Included components for the Ergotron HX Monitor Arm.

3. Produktspezifikationen

Modellnummer45-647-216
Technische Daten18.6 x 11.2 x 7.7 Zoll
Artikelgewicht18.3 Pfund
MaterialMetall
FarbeWeiß
MontagetypTabletop Mount (Desk Clamp oder Öse)
BewegungstypArtikulieren
Kompatible GeräteMonitors up to 49 inches, 28 to 42 lbs
VESA-Kompatibilität75x75mm, 100x100mm
Maximaler Neigungswinkel20 Grad
Hubbereich11.5 inches (screen rises 17.8 inches from worksurface)
Drehung360 Grad
Schreibtisch Clamp Dicke0.4 bis 2.6 Zoll (1-6.6 cm)
Grommet Mount Hole Diameter0.4 bis 2 Zoll (1-5.1 cm)
Von oben nach unten view of the Ergotron HX Monitor Arm showing its full extension and retraction capabilities, with measurements of 6 inches (15.4 cm) for minimum depth and 17.6 inches (44.7 cm) for maximum depth from the mounting point, and a vertical range of 23.6 inches (59.4 cm).

Figure 3.1: Ergotron HX Monitor Arm dimensions and range of motion.

Seite view of the Ergotron HX Monitor Arm with a monitor attached, illustrating an 11.5 inch (29 cm) vertical lift range.

Figure 3.2: Vertical lift range of the monitor arm.

Seite view of the Ergotron HX Monitor Arm showing its horizontal reach, with measurements indicating a minimum depth of 4 inches (10 cm) and a maximum depth of 9.8-12.9 inches (24.9-32.8 cm) from the mounting point to the VESA plate, and a total arm length of 6.7 inches (17 cm) for the lower arm segment and 5.8 inches (15 cm) for the base.

Figure 3.3: Horizontal reach and dimensions of the monitor arm.

4. Einrichtung und Installation

The Ergotron HX Monitor Arm offers two primary mounting options: a desk clamp for surface edges and a grommet mount for installation through a surface hole. Ensure your desk surface meets the specified thickness requirements for your chosen mounting method.

4.1. Auswahl einer Montageart

  • Schreibtisch Clamp: Suitable for desk edges 0.4 to 2.6 inches (1-6.6 cm) thick.
  • Ösenbefestigung: Requires a surface hole with a diameter of 0.4 to 2 inches (1-5.1 cm) and a desk thickness of up to 2.8 inches (7.2 cm).
Diagram illustrating two mounting options for the Ergotron HX Monitor Arm: a desk clamp for surfaces 0.4-2.6 inches (1-6.6 cm) thick, and a grommet mount for surfaces up to 2.8 inches (7.2 cm) thick with a hole diameter of 0.4-2 inches (1-5.1 cm).

Abbildung 4.1: Schreibtisch clamp and grommet mount options with dimensions.

4.2. Monitor Compatibility (VESA)

The monitor arm is compatible with VESA patterns 75x75mm and 100x100mm. It supports monitors up to 49 inches and weighing between 28 to 42 lbs (12.7 to 19.1 kg).

Diagram comparing 3000R and 1000R curved monitors, showing that the 1000R curve is deeper (12 inches / 30.4 cm) than the 3000R curve (6 inches / 15.2 cm), indicating the arm's compatibility with deeply curved ultrawide displays.

Figure 4.2: Compatibility with 1000R curved ultrawide monitors.

4.3. Installationsschritte

For detailed visual instructions, please refer to the official installation video below. The video demonstrates the process for mounting the HX Monitor Arm with HD Heavy-Duty Pivot, including VESA mount installation and tension adjustments.

Video 4.1: How to Install the HX Monitor Arm with HD Heavy-Duty Pivot. This video provides a step-by-step guide for mounting the monitor arm, including attaching the VESA plate to the monitor, securing the arm to the desk, and making initial tension adjustments.

5. Bedienungsanleitung

The Ergotron HX Monitor Arm is designed for fluid and effortless adjustments, allowing you to customize your viewErfahrung.

5.1. Einstellen der Monitorposition

The arm offers a full range of motion, including 11.5 inches of lift, allowing the screen to rise up to 17.8 inches from the worksurface. You can also rotate the monitor 360 degrees and tilt it 20 degrees to achieve optimal ergonomic positioning.

Video 5.1: HX Monitor Arm with HD Pivot: Top Features & Benefits. This video highlights the key features and benefits of the monitor arm, demonstrating its smooth movement, tilt, and rotation capabilities for an enhanced user experience.

A person using a large curved ultrawide monitor mounted on an Ergotron HX arm, positioned ergonomically for gaming or work, demonstrating the arm's ability to hold heavy displays in various positions.

Figure 5.1: Ergonomic positioning with the Ergotron HX Monitor Arm.

5.2. Adjusting Arm Tension

If the arm does not hold its position or is too stiff to move, you may need to adjust the tension. Use the provided Allen wrench to turn the tension screw. Turn clockwise to increase tension (for heavier monitors) or counter-clockwise to decrease tension (for lighter monitors). Adjust gradually until the arm holds the monitor securely in any position with minimal effort.

5.3. Kabelmanagement

The monitor arm features integrated cable management to keep your workspace tidy. Route monitor cables through the designated channels along the arm to maintain a clean and organized setup.

Nahaufnahme view of the Ergotron HX Monitor Arm's cable management system, showing cables neatly routed along the arm's underside through integrated clips and channels.

Abbildung 5.2: Integriertes Kabelmanagementsystem.

6. Wartung

To ensure the longevity and smooth operation of your Ergotron HX Monitor Arm, perform the following maintenance:

  • Reinigung: Wipe down the arm with a soft, damp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
  • Spannungsprüfung: Periodically check the arm tension to ensure it is appropriate for your monitor's weight. Adjust as needed.
  • Befestigungsmaterial: Ensure all mounting hardware and fasteners are securely tightened. Do not overtighten.

7. Fehlerbehebung

If you encounter issues with your monitor arm, refer to the following common solutions:

  • Arm drifts down or up: Adjust the arm tension using the provided Allen wrench. Increase tension if the arm drifts down, decrease if it springs up.
  • Monitor wackelt: Ensure all mounting screws and the desk clamp/grommet mount are securely tightened. Check that the VESA plate is firmly attached to the monitor.
  • Difficulty moving the arm: If the arm is too stiff, decrease the tension slightly. If it's too loose, increase the tension.

8. Wichtige Sicherheitshinweise

  • Die maximale Tragfähigkeit von 42 lbs (19.1 kg) darf nicht überschritten werden.
  • Ensure the mounting surface is strong enough to support the combined weight of the arm and monitor.
  • Keep children and pets away from the monitor arm during installation and adjustment.
  • Always use two people when lifting and mounting heavy monitors onto the arm.
  • Lesen und befolgen Sie alle Anweisungen sorgfältig.

9. Garantie und Support

Ergotron products are built to last and set the standard for quality. The Ergotron HX HD Premium Heavy Duty Gaming Monitor Arm comes with a 10 Jahr Garantie. For technical support, warranty claims, or further assistance, please visit the official Ergotron webWebsite oder wenden Sie sich an den Kundendienst.

Weitere Informationen und Unterstützung finden Sie unter: Ergotron Store on Amazon

Zugehörige Dokumente - 45-647-216

Vorview Ergotron HX Schwerlast-Neige- und Drehpunkt-Installations- und Einstellanleitung
Ausführliche Anleitung zur Installation und Justierung des Ergotron HX Heavy-Duty Tilt Pivot mit Schritt-für-Schritt-Anweisungen, Sicherheitshinweisen und Informationen zur Tragfähigkeit.
Vorview Ergotron LX Pro Desk Monitor Arm Disassembly and Material Guide
Detailed disassembly instructions and material call-out for the Ergotron LX Pro Desk Monitor Arm family, including model numbers 45-682, 45-686, 45-690, 45-695, 45-708, 45-709, and 45-710. Includes disposal information and material breakdown.
Vorview Ergotron HX Schreibtischmonitorarm mit VHD-Drehpunkt – Installationsanleitung und Benutzerhandbuch
Ausführliche Installationsanleitung und Bedienungsanleitung für den Ergotron HX Schreibtisch-Monitorarm mit VHD-Drehgelenk. Erfahren Sie, wie Sie Ihren Monitorarm sicher installieren, einstellen und ergonomisch optimal nutzen. Enthält Sicherheitshinweise, technische Daten und Kontaktinformationen zum Kundendienst.
Vorview Ergotron HX Schreibtischmonitorarm – Installationsanleitung und Benutzerhandbuch
Ausführliche Installationsanleitung und Bedienungsanleitung für den Ergotron HX Monitorarm, mit detaillierten Informationen zu Montage, Einstellungen, Sicherheitsvorkehrungen und Produktspezifikationen. Erfahren Sie, wie Sie Ihren Monitorarm sicher installieren und optimal ergonomisch nutzen.
Vorview Ergotron HX Schreibtischmonitorarm: Installations- und Benutzerhandbuch
Eine umfassende Anleitung zur Installation und Justierung des Ergotron HX Monitorarms mit Constant Force™-Technologie. Enthält eine Teileliste, eine schrittweise Montageanleitung, Justierungshinweise, Sicherheitshinweise und Informationen zur Tragfähigkeit.
Vorview Ergotron LX Pro Arm Einzelbildschirm-Tischhalterung – Installations- und Einstellanleitung
Diese Anleitung bietet umfassende Anweisungen zur Installation, Justierung und sicheren Verwendung der Ergotron LX Pro Arm Einzelbildschirm-Tischhalterung. Sie behandelt die Teileidentifizierung, die Montageschritte, verschiedene Einstellmöglichkeiten wie Anheben, Neigen, Schwenken und Reibung sowie wichtige Sicherheitshinweise und Informationen zur Tragfähigkeit.