1. Einleitung
This manual provides comprehensive instructions for the installation, programming, and operation of the Finder 12.A4.8.230.0010 NFC Weekly Time Clock. This electronic astronomical time switch features a weekly program, an analog output, and can be programmed via a joystick or an NFC-enabled smartphone using the Finder Toolbox app.
2. Sicherheitshinweise
Bitte lesen Sie diese Sicherheitshinweise vor der Installation und Inbetriebnahme sorgfältig durch. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder Beschädigung des Geräts führen.
- Die Installation muss von einem qualifizierten Elektriker gemäß den örtlichen Verdrahtungsvorschriften durchgeführt werden.
- Vor Beginn jeglicher Installations- oder Wartungsarbeiten muss die Stromversorgung unterbrochen werden.
- Setzen Sie das Gerät keiner Feuchtigkeit, extremen Temperaturen oder korrosiven Umgebungen aus.
- Das Gerät ist nur für den Innenbereich bestimmt.
3. Produktüberschreitungview
The Finder 12.A4.8.230.0010 is an electronic time switch designed for DIN rail mounting. It offers precise time control with a weekly program and astronomical function.
Abbildung 1: Vorderseite view of the Finder 12.A4.8.230.0010 Time Clock, showing the LCD display, joystick, and NFC symbol.
Hauptmerkmale:
- Weekly program for flexible scheduling.
- 1 analog output: 0-10 V or PWM.
- 1 changeover contact for 16 A / 250 V AC (AC1).
- Versorgungsvolumentage: 110-230 V AC/DC.
- LCD display for clear information.
- Programming via joystick or NFC-enabled smartphone with Finder Toolbox app (Android and iOS).
- Astronomical time control: automatic switching at sunrise and sunset based on postcode or coordinates.
- Adjustable time offset for sunrise/sunset.
4. Einrichtung und Installation
This device is designed for DIN rail mounting. Follow these steps for proper installation:
- Stromabschaltung: Ensure the main power supply to the installation area is completely disconnected before proceeding.
- Montage: Mount the time switch securely onto a standard DIN rail.
- Verdrahtung: Connect the power supply (110-230 V AC/DC) to terminals A1 and A2. Connect the load to the changeover contact terminals (NO, NC, COM) and the analog output (W, O, Y) as required. Refer to the wiring diagram below.
Abbildung 2: Ausführlich view of the wiring terminals for power input (A1, A2), relay output (NO, NC, COM), and analog output (W, O, Y).
Notiz: The device features safe separation between the power supply and contacts.
5. Bedienungsanleitung
5.1 Erstes Einschalten
Once wired, restore power. The LCD display will illuminate. You may need to set the current date and time if it's the first use or after a prolonged power outage.
5.2 Programming via Joystick
The integrated joystick allows for direct programming on the device:
- Navigation: Use the joystick to move through menu options (up, down, left, right).
- Auswahl/Bestätigung: Press the joystick inwards to select an option or confirm a setting.
- Follow the on-screen prompts to set the current time, date, weekly program, and astronomical functions.
5.3 Programming via NFC (Finder Toolbox App)
For maximum flexibility, program the time switch using an NFC-enabled smartphone and the Finder Toolbox app:
- Lade App herunter: Download the "Finder Toolbox" app from the Google Play Store (Android) or Apple App Store (iOS).
- Create/Load Program: Open the app and create a new program or load an existing one. The app allows for detailed configuration of weekly schedules, astronomical settings, and special functions.
- Übertragen von Daten: To transfer the program, hold your smartphone close to the NFC symbol on the time switch. The app will guide you through the data transfer process.
- Read Program: You can also read an existing program from the time switch to your smartphone for editing or backup.
5.4 Astronomical Time Control
The device can automatically switch based on sunrise and sunset times:
- Standorteinstellung: Set your location by entering a postcode or geographical coordinates in the programming menu (via joystick or app).
- Versatz: You can set a selectable time offset for both sunrise and sunset times to adjust switching points.
- Astro ON/OFF: Configure specific ON/OFF times during the astronomical ON period if needed.
6. Wartung
The Finder 12.A4.8.230.0010 is designed for maintenance-free operation. However, periodic checks are recommended:
- Reinigung: Reinigen Sie das Gerät mit einem trockenen, weichen Tuch. Verwenden Sie keine Scheuermittel oder Lösungsmittel.
- Verbindungen: Periodically check terminal connections to ensure they are secure.
- Firmware-Updates: Check the Finder website or app for any available firmware updates for improved functionality or bug fixes.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät lässt sich nicht einschalten. | Keine Stromversorgung oder falsche Verkabelung. | Check power connections (A1, A2) and ensure power is supplied. Verify wiring against the diagram. |
| Program not executing. | Incorrect program settings or manual override active. | Review program settings via joystick or app. Check for any active manual override functions. Ensure current date/time is correct. |
| NFC transfer fails. | Smartphone not NFC-enabled, app not open, or poor contact. | Ensure your smartphone has NFC enabled. Open the Finder Toolbox app. Hold the phone directly over the NFC symbol on the device. |
| Astronomical function inaccurate. | Incorrect location (postcode/coordinates) or time zone setting. | Verify the entered postcode or coordinates. Check the time zone setting. |
If the problem persists, please contact Finder technical support.
8. Technische Daten
Figure 3: Dimensions of the Finder 12.A4.8.230.0010 Time Clock, showing approximate measurements of 10cm height, 6cm width, and 5cm depth.
| Besonderheit | Detail |
|---|---|
| Marke | Finder |
| Modellnummer | 12.A4.8.230.0010 |
| Abmessungen (H x B x T) | 10 x 6 x 5 cm |
| Gewicht | 70 g |
| Versorgungsvolumentage | 110-230 V Wechsel-/Gleichspannung |
| Ausgangskontakt | 1 changeover contact, 16 A / 250 V AC (AC1) |
| Analogausgang | 0-10 V or PWM |
| Kontaktmaterial | AgSnO2 |
| max. Einschaltstrom | 120 A für 5 ms |
| Min. Switching Time | 1 Minute |
| Max. Switching Power (230 V AC1) | 4000 VA |
| Eingabe der menschlichen Schnittstelle | Buttons (Joystick) |
| Batterien erforderlich | NEIN |
| Kompatibel mit | Power supplies/ballasts with 0-10 V or PWM inputs, or Slave dimmers Type 15.11 |
9. Garantie und Support
For warranty information and technical support, please refer to the official Finder webBesuchen Sie unsere Website oder kontaktieren Sie Ihren Händler vor Ort. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
Hersteller: Finder
Product on Amazon.es since: 24. Mai 2021
