XTOOL TP150 TPMS Relearn Tool Benutzerhandbuch
Model: XT-TP150
1. Einleitung
The XTOOL TP150 is a professional Tire Pressure Monitoring System (TPMS) tool designed for comprehensive TPMS service. It supports activation, relearning, programming of XTOOL sensors, and diagnostic functions for TPMS systems. This manual provides detailed instructions for the proper use and maintenance of your TP150 device.
2. Sicherheitshinweise
Always observe the following safety precautions when operating the TP150 tool:
- Lesen Sie vor der Verwendung alle Anweisungen sorgfältig durch.
- Das Gerät darf nicht bei Nässe oder in der Nähe von brennbaren Flüssigkeiten/Gasen betrieben werden.
- Stellen Sie sicher, dass die Zündung des Fahrzeugs ausgeschaltet ist, bevor Sie das OBDII-Kabel anschließen oder abziehen.
- Use only the accessories and parts specified by XTOOL.
- Halten Sie das Werkzeug von Kindern fern.
- Properly dispose of old TPMS sensors and batteries according to local regulations.
3. Produktüberschreitungview
The XTOOL TP150 TPMS tool is a handheld device equipped with a user-friendly interface. It comes with two 315/433MHz dual-frequency sensors for programming.
Image: The XTOOL TP150 device, two XTOOL TPMS sensors, and their protective yellow carrying case.
3.1. Hauptmerkmale
- TPMS Activation: Activates all known OE and aftermarket TPMS sensors.
- TPMS-Neuanlernen: Supports OBD Relearn and Static Relearn for all sensors.
- TPMS-Programmierung: Programs XTOOL 315/433MHz sensors with four methods: Automatic ID Generation, Manual ID Entry, Copy ID by Activating, and Read ECU Copy ID.
- TPMS-Diagnose: Reads and clears TPMS Diagnostic Trouble Codes (DTCs), resets TPMS warning light.
- Echtzeit-Datenanzeige: Shows sensor ID, tire pressure, temperature, and sensor voltage.
- OE Sensor Information Check: Displays brand, part number, and frequency of OE sensors.
4. Einrichtung
4.1. Ersteinrichtung des Geräts
- Auspacken: Carefully remove the TP150 tool and accessories from the packaging.
- Einschalten: Drücken Sie die Einschalttaste, um das Gerät einzuschalten.
- Software-Update: It is highly recommended to update the device software to the latest version before first use. Connect the device to a computer with internet access and follow the update instructions provided on the XTOOL official website or through the device's update menu. (Note: Some functionalities may not work correctly without the latest software.)
4.2. Verbindung zum Fahrzeug herstellen
- Suchen Sie den OBDII-Anschluss des Fahrzeugs, der sich üblicherweise unter dem Armaturenbrett auf der Fahrerseite befindet.
- Stellen Sie sicher, dass die Zündung des Fahrzeugs ausgeschaltet ist.
- Connect the OBDII cable from the TP150 tool to the vehicle's OBDII port.
- Turn the vehicle's ignition to the ON position (engine off). The TP150 will power on automatically via the OBDII connection.
5. Bedienungsanleitung
The TP150 offers various functions accessible from the main menu. Navigate using the directional buttons and confirm selections with the OK button.
5.1. Activating TPMS Sensors
- Wählen Sie im Hauptmenü "TPMS" or "Activate".
- Choose the vehicle make, model, and year.
- Wählen "Activate Sensor".
- Hold the TP150 tool near each tire's valve stem and press the activation button.
- The tool will display sensor information (ID, pressure, temperature, voltage) upon successful activation.
5.2. TPMS Relearn Procedures
Relearning is required when new sensors are installed, tires are rotated, or the ECU is replaced.
- Wählen Sie im Hauptmenü "TPMS", Dann "Relearn".
- Wählen Sie die Fahrzeugmarke, das Modell und das Baujahr aus.
- Choose the appropriate relearn method:
- OBD-Anlernen: Connect the TP150 to the vehicle's OBDII port. Follow on-screen instructions to transfer new sensor IDs to the vehicle's ECU.
- Static Relearn: Follow the specific vehicle manufacturer's procedure, often involving a sequence of actions (e.g., turning ignition on/off, pressing brake pedal). The TP150 will guide you through the process.
- Confirm successful relearn on the device screen and check the vehicle's dashboard for the TPMS warning light status.
5.3. Programming XTOOL Sensors
The TP150 can program XTOOL 315/433MHz sensors only. This is useful for replacing faulty sensors.
- Wählen Sie im Hauptmenü "TPMS", Dann "Program Sensor".
- Place the XTOOL sensor to be programmed near the TP150's antenna.
- Wählen Sie eine der folgenden Programmiermethoden:
- Automatische ID-Generierung: The tool generates a new, unique sensor ID.
- Enter ID Manually: Input a specific sensor ID if known.
- Copy ID by Activating: Activate an existing sensor to copy its ID to the new XTOOL sensor.
- Read ECU Copy ID: Read sensor IDs directly from the vehicle's ECU via the OBDII port and copy them to new XTOOL sensors.
- Follow the on-screen prompts to complete the programming.
5.4. Diagnosing TPMS System
- Connect the TP150 to the vehicle's OBDII port.
- Wählen Sie im Hauptmenü "TPMS", Dann "Diagnose".
- The tool will scan the TPMS system for Diagnostic Trouble Codes (DTCs).
- Review the displayed DTCs to identify system faults.
- After repairs, select "Clear DTCs" to erase the codes and reset the TPMS warning light.
6. Wartung
- Reinigung: Wischen Sie das Gerät mit einem weichen, damp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Lagerung: Store the TP150 in its protective case in a dry, cool environment when not in use.
- Software-Updates: Prüfen Sie regelmäßig, ob Software-Updates verfügbar sind, und installieren Sie diese, um eine optimale Leistung und Kompatibilität mit neuen Fahrzeugmodellen und Sensoren zu gewährleisten.
- Batteriepflege: If the device has an internal battery, avoid fully discharging it for extended periods. Charge it periodically if stored for a long time.
7. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät lässt sich nicht einschalten. | No power from OBDII port; faulty cable; device issue. | Check OBDII connection; try on another vehicle; ensure vehicle ignition is ON. |
| Cannot activate sensor. | Sensor out of range; sensor faulty/dead battery; incorrect vehicle selection; outdated software. | Ensure tool is close to valve stem; check sensor condition; verify vehicle details; update software. |
| Relearn fails. | Incorrect relearn procedure; vehicle specific issues; outdated software. | Follow on-screen instructions precisely; ensure all sensors are activated; update software. |
| Cannot program non-XTOOL sensors. | The TP150 only programs XTOOL brand sensors. | This is expected behavior. Use XTOOL sensors for programming. |
8. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | XTOOL |
| Modellnummer | XT-TP150 |
| Artikelgewicht | 3.52 Pfund |
| Verpackungsabmessungen | 10.79 x 9.84 x 4.09 Zoll |
| Stromquelle | Handheld (OBDII powered) |
| Betriebssystem | Android 4.4 |
| UPC | 789605296901 |
| Datum der ersten Verfügbarkeit | 3. Juli 2021 |
9. Garantie und Support
9.1. Garantieinformationen
XTOOL products typically come with a limited warranty covering defects in materials and workmanship. Please refer to the warranty card included with your product or visit the official XTOOL website for detailed warranty terms and conditions, including duration and coverage specifics.
9.2. Technischer Support
For technical assistance, software updates, or any inquiries regarding your XTOOL TP150, please contact XTOOL customer support through their official channels:
- Offiziell WebWebsite: www.xtooltech.com (Check for support contact details, FAQs, and software downloads)
- E-Mail-Support: Siehe den Kontaktbereich auf der offiziellen Website. webWebsite.
- Online-Ressourcen: Many helpful guides and videos may be available on the XTOOL website or their official social media channels.
When contacting support, please have your product model (XT-TP150) and serial number ready.
