1. Einleitung
This manual provides essential instructions for the safe and effective installation, operation, and maintenance of the Okin JLDQ-12 and JLDQ.12.133.226M power recliner and bed motor actuator replacement. Please read this manual thoroughly before installation and use to ensure proper function and longevity of the product.
2. Produktüberschreitungview und Komponenten
The Okin JLDQ.12.133.226M is an electric linear actuator designed for power recliners and adjustable beds. It is specifically engineered as a direct replacement for the original Okin JLDQ.12.133.226M model.
2.1 Schlüsselkomponenten
- Stellmotor: The main unit responsible for linear movement.
- Anschlüsse:
- 5-poliger Rundstecker: Zum Anschluss an die Handsteuerung.
- 2-poliger quadratischer Stecker: Zum Anschluss an die Stromversorgung.
Figure 1: Okin JLDQ.12.133.226M motor actuator with attached cables.
Abbildung 2: Ausführlich view of the 5-pin round plug for the recliner switch and the 2-pin square plug for the power supply.
3. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellname | JLDQ.12.133.226M |
| Tragfähigkeit | Push force: 750N, Pull force: 750N |
| Schlaganfall | 226 mm |
| Mindestinstallationsgröße (Schrumpfung) | 133 mm |
| Maximale Installationsgröße | 359 mm |
| Betriebsfrequenz | An 1 Minute / Aus 8 Minuten |
| Geschwindigkeit | 29VDC SMPS, 10 sec without load |
| Aussehen | Schwarz (PA), Silberweiß (Aluminium) |
| Technische Daten | 8.9 x 8.9 x 14.13 Zoll |
| Artikelgewicht | 4.59 Pfund (2.09 Kilogramm) |
Figure 3: Product label displaying technical data and model information, including serial number 21061699. Quartal 00271 und Modell JLDQ.12.133.226M. For patent information, visit www.dewertokin.de/patents.
4. Einrichtung und Installation
Wichtiger Hinweis zur Kompatibilität: This motor is specifically designed to replace the OKIN model JLDQ.12.133.226M. Different actuator/motors are generally not compatible due to strict requirements for minimum installation dimensions, stroke, and plug types. Always verify your existing motor's brand and model before attempting replacement.
4.1 Prüfungen vor der Installation
- Modell überprüfen: Confirm that your existing motor is an Okin JLDQ.12.133.226M.
- Stromabschaltung: Ensure the power supply to the recliner or bed is completely disconnected before starting any installation work.
- Komponenten prüfen: Check the new motor and cables for any visible damage.
4.2 Installationsschritte
- Alten Motor ausbauen: Carefully detach the old motor from the recliner or bed frame. Note how it was connected to ensure correct installation of the new unit.
- Positionieren Sie den neuen Motor: Align the new Okin JLDQ.12.133.226M motor with the mounting points on the frame.
- Motor sichern: Fasten the motor securely to the frame using appropriate hardware (not included, typically reused from the old motor or provided with the furniture).
- Kabel anschließen:
- Verbinden Sie 5-poliger Rundstecker to the hand control switch.
- Verbinden Sie 2-pin square plug zum Netzteil.
- Kabelmanagement: Ensure all cables are routed safely, away from moving parts, and secured to prevent pinching or damage.
Abbildung 4: Bspample of the motor actuator mounted, showing its extended position.
5. Bedienungsanleitung
Once the motor is correctly installed and all connections are secure, reconnect the main power supply to your recliner or adjustable bed.
- Einschalten: Plug the recliner/bed into a suitable power outlet.
- Handsteuerung: Use the hand control unit to operate the recliner or bed. Press and hold the appropriate buttons to extend or retract the actuator, adjusting the position as desired.
- Arbeitszyklus: Adhere to the specified operation frequency: On 1 minute / Off 8 minutes. Continuous operation beyond 1 minute can lead to overheating and damage to the motor. Allow the motor to cool down for at least 8 minutes after 1 minute of continuous use.
6. Wartung
Regular maintenance ensures the longevity and reliable operation of your Okin motor actuator.
- Reinigung: Wipe clean the exterior of the motor and cables with a dry or slightly damp Mit einem Tuch abwischen. Keine Scheuermittel verwenden und das Gerät nicht in Wasser tauchen.
- Kabelinspektion: Periodically check all cables and connections for wear, fraying, or loose plugs. Ensure they are securely attached and not pinched.
- Bewegliche Teile: Ensure the linear shaft moves freely and is not obstructed by debris or fabric.
- Schmierung: Der Motor ist im Allgemeinen wartungsfrei hinsichtlich der internen Schmierung. Versuchen Sie nicht, interne Komponenten zu schmieren, es sei denn, Sie werden ausdrücklich vom Okin-Support dazu aufgefordert.
7. Fehlerbehebung
If your recliner or adjustable bed is not functioning correctly, follow these troubleshooting steps:
- Keine Bewegung:
- Check if the power cord is securely plugged into the wall outlet and the power supply unit.
- Verify that the 2-pin square plug from the motor is firmly connected to the power supply.
- Ensure the 5-pin round plug from the motor is properly connected to the hand control.
- Testen Sie die Steckdose mit einem anderen Gerät, um sicherzustellen, dass sie Strom liefert.
- Intermittierende Bewegung:
- Überprüfen Sie alle Kabelverbindungen auf Lockerheit oder Beschädigung.
- Ensure the motor is not overheating. Allow it to cool down if it has been operated continuously.
- Ungewöhnliche Geräusche:
- Check for any obstructions around the motor or the linear shaft.
- Ensure the motor is securely mounted and not vibrating against the frame.
- Motor Does Not Extend/Retract Fully:
- Verify that there are no physical obstructions preventing full movement.
- Ensure the motor is correctly installed with the specified minimum and maximum installation sizes.
If issues persist after following these steps, contact Okin customer support or a qualified technician.
8. Wichtige Sicherheitshinweise
- Vor Installations-, Wartungs- oder Reinigungsarbeiten stets die Stromzufuhr unterbrechen.
- Dieses Produkt ist nur für die Verwendung in Innenräumen bestimmt.
- Do not allow children or pets to play near the moving parts of the recliner or bed.
- Ensure proper cable routing to prevent tripping hazards or damage to the cables.
- Versuchen Sie nicht, den Motor oder seine Komponenten zu verändern. Nicht autorisierte Änderungen können zu Fehlfunktionen führen und die Garantie erlöschen lassen.
- Only use this motor as a replacement for the specified Okin JLDQ.12.133.226M model. Using incompatible parts can cause damage to the furniture and the motor.
9. Garantie und Support
For warranty information, technical support, or further assistance, please refer to the official Okin website or contact your product retailer. Keep your purchase receipt as proof of purchase for warranty claims.
You can visit the Okin store for more products and information: Okin Store auf Amazon.
