Einführung
This manual provides essential information for the setup, operation, maintenance, and troubleshooting of your Zebra MC9300 Pistol Grip Mobile Computer. Designed for robust performance in various environments, the MC9300 features an Android operating system, an extended-range 2D/1D barcode scanner, and a 53-key alpha-numeric keyboard.
Figure 1: Zebra MC9300 Mobile Computer with its charging cradle and power adapter.
The image displays the Zebra MC9300 mobile computer, a rugged handheld device with a large screen and a physical alphanumeric keyboard, featuring a pistol grip handle. To the left of the device, a charging cradle is shown, along with a power adapter and a USB cable, indicating the included accessories for charging and connectivity.
Aufstellen
1. Auspacken und Inspektion
Nehmen Sie alle Komponenten vorsichtig aus der Verpackung. Überprüfen Sie, ob alle unten aufgeführten Teile vorhanden und unbeschädigt sind:
- Zebra MC9300 Mobilcomputer
- Wiederaufladbarer Akku
- Ladestation
- Netzteil und Kabel
2. Einbau und Aufladen der Batterie
- Suchen Sie das Batteriefach auf der Rückseite des Geräts.
- Setzen Sie die Batterie ein und achten Sie dabei auf die korrekte Ausrichtung der Kontakte.
- Schließen Sie den Batteriefachdeckel fest.
- Connect the power adapter to the charging cradle, then plug the adapter into a power outlet.
- Place the MC9300 into the charging cradle. The charging indicator light will illuminate, indicating that the device is charging. Allow sufficient time for a full charge before first use.
3. Erstes Einschalten
Press and hold the power button located on the side of the device until the screen illuminates. Follow the on-screen prompts to complete the initial Android setup, including language selection and network configuration.
Bedienungsanleitung
1. Grundlegende Navigation
The MC9300 operates on the Android platform. Navigate using the touchscreen for gestures like tap, swipe, and pinch-to-zoom. The physical keyboard provides alphanumeric input and dedicated function keys.
2. Barcode-Scanning
So scannen Sie einen Barcode:
- Öffnen Sie eine Anwendung, die das Scannen von Barcodes unterstützt.
- Richten Sie das Scannerfenster auf den Barcode.
- Press one of the dedicated scan buttons (typically located on the side or pistol grip).
- Ensure the red aiming dot or crosshair is centered on the barcode for optimal reading.
- A successful scan is usually indicated by an audible beep or a visual confirmation on the screen.
3. Tastaturbenutzung
The 53-key alpha-numeric keyboard allows for rapid data entry. Utilize the function keys (F1-F12) and modifier keys (Shift, Alt, Ctrl) for specific application functions. Refer to your application's documentation for specific key assignments.
4. Connectivity (Bluetooth, Wi-Fi, USB)
- W-lan: Access Wi-Fi settings through the Android system settings to connect to available wireless networks.
- Bluetooth: Pair with Bluetooth-enabled devices such as printers or headsets via the Bluetooth settings.
- USB: Connect the device to a computer using a USB cable for data transfer or device management.
Wartung
1. Reinigen des Geräts
Um optimale Leistung und Hygiene zu gewährleisten:
- Verwenden Sie ein weiches, fusselfreies Tuch dampened with a mild cleaning solution (e.g., isopropyl alcohol) to wipe the exterior surfaces.
- Reinigungsmittel dürfen nicht direkt auf das Gerät gesprüht werden.
- Clean the scanner window with a soft, dry cloth to ensure clear scanning.
- Vermeiden Sie Scheuermittel oder Lösungsmittel.
2. Batteriepflege
Proper battery care extends battery life:
- Always use the original or approved charging accessories.
- Setzen Sie den Akku keinen extremen Temperaturen aus.
- If the device will be stored for an extended period, ensure the battery is partially charged (around 50%) and remove it if possible.
Fehlerbehebung
This section addresses common issues you might encounter with your MC9300 mobile computer.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Device repeatedly shuts down. | Low battery, software glitch, or faulty battery/hardware. |
|
| Barcode-Scanner liest nicht. | Dirty scanner window, incorrect aiming, or scanner disabled. |
|
| Gerät wird nicht geladen. | Improper connection, faulty charger/cradle, or battery issue. |
|
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | MC930B-GSEGG4NA |
| Betriebssystem | Android |
| Scannertyp | 2D/1D Barcode Scanner (Extended Range) |
| Tastatur | 53-Key Alpha Numeric Keyboard |
| Konnektivität | Bluetooth, Wi-Fi, USB Cable |
| Stromquelle | Batteriebetrieben |
| Technische Daten | 10 x 8 x 3 Zoll (25.4 x 20.32 x 7.62 cm) |
| Artikelgewicht | 4 Pfund (1.81 kg) |
| Hersteller | Symbol (Zebra) |
Garantie und Support
Amazon Renewed-Garantie
This product is sold as an Amazon Renewed item. If you are not satisfied with your purchase, renewed products are eligible for replacement or refund under the Amazon Renewed Guarantee. Please refer to the Amazon Renewed program terms and conditions for full details regarding eligibility and process.
Technische Unterstützung
For technical assistance, troubleshooting beyond this manual, or warranty claims, please contact the seller or Amazon customer support. Have your product model number (MC930B-GSEGG4NA) and purchase details ready when contacting support.
For more information, visit the official Zebra support website or consult your reseller.
