Orbit Easy Dial 6-Station Indoor Sprinkler Controller

1. Einleitung

The Orbit 6-zone indoor sprinkler controller is designed to provide convenient and flexible control over your lawn or garden watering schedule. Its user-friendly interface simplifies setup and customization, offering features such as rain delay, water budgeting, and dual watering programs to meet specific irrigation needs.

This manual provides detailed instructions for the installation, operation, and maintenance of your Orbit Easy Dial Sprinkler Controller.

Hauptmerkmale:

• Flexible Watering Options: Set water duration for each station between 1-240 minutes.
• Efficient Watering Schedule: Up to 8 start times per day to reduce water runoff.
• Rain Delay Feature: Pause watering for 24, 48, or 72 hours.
• Water Budgeting: Adjust run times based on seasonal changes.
• Dual Watering Programs: Independent programs for customized intervals, days of the week, or even/odd watering days.

Abbildung 1.1: Vorderseite view of the Orbit Easy Dial 6-Station Indoor Sprinkler Controller, showing the LCD display, control buttons, and rotary dial.

2. Sicherheitshinweise

Please read all safety information before installing or operating the controller. Failure to follow these instructions could result in injury or property damage.

• Dieser Controller ist für nur für den Innenbereich. Do not install outdoors or in areas exposed to water.
• Vor jeglichen Verkabelungs- oder Wartungsarbeiten muss die Stromversorgung unterbrochen sein.
• All electrical connections should be made in accordance with local electrical codes.
• Versuchen Sie nicht, das Gerät selbst zu reparieren. Überlassen Sie alle Wartungsarbeiten qualifiziertem Fachpersonal.

3. Einrichtung und Installation

3.1 Montage des Controllers

Choose a suitable indoor location near a standard 120V AC electrical outlet. Avoid areas with extreme temperatures or direct sunlight.

1. Markieren Sie den gewünschten Montageort an der Wand.
2. Install two mounting screws (not included) into the wall, leaving approximately 1/8 inch (3 mm) of the screw head exposed. The screws should be spaced vertically to align with the keyhole slots on the back of the controller.
3. Hang the controller on the screws.

Abbildung 3.1: Bspample of the controller mounted on a wall in an indoor setting.

3.2 Verdrahtung des Controllers

Before wiring, ensure the power adapter is unplugged from the electrical outlet.

1. Common Wire (COM): Connect the common wire from your sprinkler valves to the terminal labeled 'COM' on the controller. This is typically a white wire.
2. Zone Wires (1-6): Connect each individual zone wire from your sprinkler valves to the corresponding numbered terminals (1 through 6) on the controller.
3. Rain Sensor (Optional): If using a rain sensor (sold separately), connect its wires to the 'SENSOR' terminals. Ensure the rain sensor switch inside the controller is set to 'ON' if a sensor is connected. If no sensor is used, keep the switch 'OFF' and ensure the jumper wire is in place between the sensor terminals.
4. Stromanschluss: Plug the included 24V AC transformer into the '24VAC' terminals on the controller. Then, plug the transformer into a standard 120V AC electrical outlet.

Abbildung 3.2: Ausführlich view of the wiring terminals, showing connections for 24VAC, SENSOR, COM, and zones 1-6.

4. Bedienungsanleitung

The Orbit Easy Dial controller features a rotary dial for selecting functions and a set of buttons for adjusting settings.

Abbildung 4.1: Bedienfeldview, highlighting the LCD display, directional buttons, and function dial.

4.1 Einstellen von Uhrzeit und Datum

1. Drehen Sie das Zifferblatt auf DATUM/UHR.
2. Verwenden Sie die + Und - buttons to set the current year, then press EINGEBEN.
3. Wiederholen Sie dies für Monat, Tag, Stunde und Minute.

4.2 Programming Watering Schedules (Programs A & B)

The controller supports two independent programs (A and B) for different watering needs.

4.2.1 Einstellen der Startzeiten

1. Drehen Sie das Zifferblatt auf STARTZEIT.
2. The display will show '1'. Use + Und - to set the first start time, then press EINGEBEN.
3. Continue setting up to 8 start times for the current program. To skip a start time, press EINGEBEN without setting a time.
4. To switch between Program A and B, press the PROGRAM A-B Taste.

4.2.2 Setting Run Times (How Long)

1. Drehen Sie das Zifferblatt auf WIE LANGE.
2. The display will show 'STATION 1'. Use + Und - to set the watering duration (1-240 minutes) for Station 1, then press EINGEBEN.
3. Repeat for each station (1-6).
4. To switch between Program A and B, press the PROGRAM A-B Taste.

4.2.3 Setting Watering Days (How Often)

1. Drehen Sie das Zifferblatt auf WIE OFT.
2. Sie können aus drei Optionen wählen:
• Wochentage: Verwenden Sie die Pfeil nach rechts button to move to the desired day, then press EINGEBEN to select/deselect.
• Intervalle: Verwenden + Und - to set the interval (e.g., every 2 days).
• Even/Odd Days: Select 'EVEN' or 'ODD' for watering on even or odd calendar days.
3. To switch between Program A and B, press the PROGRAM A-B Taste.

4.3 Regenverzögerungsfunktion

The rain delay feature allows you to temporarily suspend your watering schedule for a set period.

1. Drehen Sie das Zifferblatt auf AUTO.
2. Drücken Sie die REGENVERZÖGERUNG Taste.
3. Verwenden Sie die + Und - buttons to select a delay of 24, 48, or 72 hours.
4. The controller will automatically resume the schedule after the delay period. To cancel, press KLAR.

4.4 Water Budgeting

The water budgeting feature allows you to adjust all programmed run times by a percentage, useful for seasonal adjustments without reprogramming each station.

1. Drehen Sie das Zifferblatt auf BUDGET.
2. Verwenden Sie die + Und - buttons to adjust the percentage (e.g., 50% to reduce watering by half, 150% to increase by 50%).
3. The change applies to all active programs and stations.

4.5 Manueller Betrieb

To manually water a specific station or all stations:

1. Drehen Sie das Zifferblatt auf AUTO.
2. Drücken Sie die HANDBUCH Taste.
3. Verwenden Sie die Pfeil nach rechts or Pfeil nach links buttons to select the desired station or 'ALL' for all stations.
4. Drücken EINGEBEN.
5. Verwenden + Und - um die manuelle Laufzeit einzustellen.
6. Drücken EINGEBEN um die manuelle Bewässerung zu starten.
7. Um die manuelle Bewässerung zu beenden, drücken Sie KLAR.

4.6 Turning Off the Controller

To stop all automatic watering, turn the dial to AUS. The controller will retain its programming.

5. Wartung

• Halten Sie den Controller sauber und frei von Staub und Schmutz. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Ensure the controller is not exposed to moisture or direct water spray.
• Überprüfen Sie regelmäßig die Kabelverbindungen, um sicherzustellen, dass sie fest sitzen.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

6. Fehlerbehebung

7. Spezifikationen

8. Garantie und Support

For specific warranty information and detailed support, please refer to the official Orbit webBesuchen Sie die Website oder kontaktieren Sie direkt den Orbit-Kundendienst. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.

Orbit is a leading provider of watering solutions, committed to delivering quality products and customer satisfaction.

You can visit the official Orbit store for more information and product support: Orbit Store auf Amazon