1. Einleitung
This manual provides detailed instructions for the ANBERNIC RG351MP Handheld Game Console. Please read this manual thoroughly before using the device to ensure proper operation and to maximize your gaming experience. Keep this manual for future reference.
2. Sicherheitshinweise
- Setzen Sie das Gerät keinen extremen Temperaturen, direkter Sonneneinstrahlung oder hoher Luftfeuchtigkeit aus.
- Lassen Sie das Gerät nicht fallen und setzen Sie es keinen starken Stößen aus.
- Halten Sie das Gerät von Wasser und anderen Flüssigkeiten fern.
- Versuchen Sie nicht, das Gerät selbst zu zerlegen oder zu reparieren. Wenden Sie sich an autorisiertes Servicepersonal.
- Verwenden Sie ausschließlich das mitgelieferte Ladekabel und den Adapter.
- Sorgen Sie während der Verwendung und des Ladevorgangs für ausreichende Belüftung.
- This product contains a Lithium Polymer battery. Dispose of batteries responsibly according to local regulations.
3. Packungsinhalt
Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:
- 1 x RG351MP Game Console
- 1 x WIFI Module
- 1 x 64-GB-SD-Karte
- 1 x USB-Ladekabel
- 1 x Benutzerhandbuch
- 1 x Displayschutzfolie.
- 1 x Wipes
4. Produktüberschreitungview
Familiarize yourself with the various components and controls of your ANBERNIC RG351MP console.
Abbildung 4.1: Vorderseite View. This image displays the front of the ANBERNIC RG351MP console, featuring the 3.5-inch IPS screen, D-pad, action buttons (X, Y, A, B), SELECT and START buttons, and dual analog joysticks.
Figure 4.2: Console Layout. This image provides various angles of the console, highlighting the L1/L2/R1/R2 shoulder buttons, OTG and DC ports on the top, volume controls on the side, and TF/EXT, Reset, and TF2/EXT slots on the bottom.
Abbildung 4.3: Zurück View. The rear of the console is shown, displaying the ANBERNIC logo, model number RG351MP, and regulatory markings. This view also indicates the location of the internal Li-Po battery.
Figure 4.4: Screen Display. This image emphasizes the console's 3.5-inch IPS screen with OCA full lamination and 640x480 resolution, providing a clear visual experience.
5. Einrichtung
5.1 Aufladen des Geräts
Before initial use, fully charge the console. Connect the provided USB charging cable to the DC port on the top of the console and the other end to a compatible USB power adapter (maximum load 2A). A full charge typically takes approximately 4 hours.
5.2 Einlegen der TF-Karte
The console supports dual TF card slots. The primary TF1/EXT slot is for the operating system and pre-installed games. The TF2/EXT slot can be used to expand storage up to 256GB for additional games.
- Locate the TF1/EXT slot on the bottom of the console.
- Gently insert the pre-installed 64GB TF card into the slot until it clicks into place.
- If using an additional TF card for games, insert it into the TF2/EXT slot.
Figure 5.1: TF Card Insertion. This image illustrates the process of inserting a TF card into the console's expansion slot, demonstrating how to properly seat the card.
5.3 Ein-/Ausschalten
- So schalten Sie das Gerät ein: Press and hold the Power button (located on the side) for a few seconds until the screen illuminates.
- So schalten Sie das Gerät aus: Press and hold the Power button until the power-off menu appears, then select "Shutdown" or "Power Off". Alternatively, a quick press of the Power button may put the device into sleep mode, depending on system settings.
5.4 Connecting the WIFI Module
The console supports an external WIFI module for network connectivity. Insert the provided WIFI module into one of the OTG USB ports (located on the top of the console). Once connected, you can configure network settings within the system menu.
6. Bedienungsanleitung
6.1 Grundlegende Navigation
- D-pad / Analog Joysticks: Use these to navigate through menus and control in-game characters.
- Ein Knopf: Confirm selection or perform primary action.
- B-Taste: Go back or perform secondary action.
- X / Y Buttons: Perform specific in-game actions as defined by the game.
- Start Knopf: Pause game, open in-game menus, or confirm selections.
- Auswahlknopf: Access system menus or perform specific in-game functions.
- L1/L2/R1/R2-Tasten: Shoulder buttons for various in-game controls.
6.2 Game Selection and Launching
From the main menu, navigate to the desired game system (e.g., PS1, GBA, NES). Select a game from the list using the D-pad or analog stick and press the A button to launch it.
6.3 Speichern und Laden von Spielständen
Most emulators support "save states" which allow you to save your progress at any point in a game, independent of the game's internal save system. Refer to the specific emulator's hotkey combinations (often a combination of SELECT + L1/R1 or similar) for saving and loading states.
6.4 Systemeinstellungen
Access the system settings menu (usually via the SELECT button or a dedicated menu option) to adjust:
- Sprache: Ändern Sie die Systemsprache.
- Anzeige: Adjust screen brightness, aspect ratio, and video filters.
- Klang: Control volume levels and audio output.
- Netzwerk: Configure Wi-Fi settings (requires external Wi-Fi module).
- Controller-Einstellungen: Map buttons or calibrate joysticks.
6.5 Adding New Games
To add new games, you will need to transfer game ROMs to the TF2/EXT card. Ensure the ROMs are in a format supported by the console's emulators. Connect the TF2/EXT card to a computer using a card reader and copy the game files to the appropriate system folders on the card. After reinserting the card into the console, refresh the game list in the system menu.
7. Wartung
7.1 Gerät reinigen
Use a soft, dry, lint-free cloth to clean the console's exterior. For the screen, use a screen-specific cleaning solution and a microfiber cloth. Do not use abrasive cleaners or solvents.
7.2 Batteriepflege
- Vermeiden Sie häufiges vollständiges Entladen des Akkus.
- Bewahren Sie das Gerät an einem kühlen, trockenen Ort auf, wenn es längere Zeit nicht benutzt wird.
- Wenn das Gerät längere Zeit nicht benutzt wird, laden Sie es vor der Lagerung auf etwa 50 % auf.
7.3 Softwareaktualisierungen
Periodically check the official ANBERNIC website or community forums for firmware updates. Updates can improve performance, add features, or fix bugs. Follow the provided instructions carefully when performing any software updates.
8. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Gerät lässt sich nicht einschalten. | Low battery; TF card not properly inserted; System crash. | Charge the device for at least 30 minutes. Ensure TF1/EXT card is correctly inserted. Press the Reset button (located on the bottom of the console) with a thin object. |
| Spiele laden nicht oder stürzen ab. | Corrupt game file; Incorrect emulator settings; TF card issue. | Spiel überprüfen file integrity. Check emulator settings (e.g., core, video driver). Reinsert or try a different TF card. |
| Der Bildschirm ist leer oder flackert. | Software issue; Hardware malfunction. | Starten Sie das Gerät neu. Sollte das Problem weiterhin bestehen, wenden Sie sich bitte an den Kundendienst. |
| Kein Ton. | Volume too low; Muted; Headphone jack issue. | Increase volume using the side buttons. Check system sound settings. Ensure no headphones are partially inserted. |
9. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modell | RG351MP |
| Material | Aluminum alloy shell, CNC process |
| Bildschirm | 3.5 inch IPS screen, OCA full lamination, 640*480 resolution |
| CPU | RK3326 Quad-Core 1.5 GHz |
| Grafikkarte | Mali-G31 MP2 |
| RAM | DDR3L 1 GB |
| Interner Speicher | 16GB (for system) |
| System | Open-Source-Linux-System |
| Spielunterstützung | Vibrating motor, supports 20+ game formats. Users can download relevant game formats. |
| Lautsprecher | High quality double horn stereo speaker |
| Batterie | Li-polymer 3500 mAh, lasting approximately 6 hours |
| Laden | 1.3A charging, matching maximum load 2A, USB charging cable, 4 hours for full charge |
| TF-Karten-Unterstützung | Supports TF card max to 256GB (dual TF card slots) |
| Andere Funktionen | Support external network card WIFI, Double OTG, Double 3D rocker, Support 3.5mm stereo earphones. |
| Maße | 6.6 x 3.8 x 1.9 Zoll (Verpackungsmaße) |
| Artikelgewicht | 15.2 Unzen |
10. Garantie und Support
10.1 Garantieinformationen
ANBERNIC products are covered by a limited warranty. Please refer to the warranty card included in your package or visit the official ANBERNIC webDie detaillierten Garantiebedingungen finden Sie auf der Website. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
10.2 Kundendienst
If you encounter any issues or have questions not covered in this manual, please contact ANBERNIC customer support. You can usually find contact information on the official ANBERNIC weboder über den Händler, bei dem Sie das Produkt gekauft haben.
