Einführung
The RØDE PSA1+ is a premium professional studio boom arm engineered to provide silent, smooth, and precise microphone positioning for a variety of applications, including podcasting, streaming, and broadcasting. Its robust construction and thoughtful design ensure optimal performance and a clutter-free workspace.
Lieferumfang
Carefully unpack your RØDE PSA1+ and ensure all components are present:
- PSA1+ Professional Studio Arm
- Schreibtisch Clamp
- Desk Insert (for permanent mounting)
- 3/8" - 5/8" Thread Adaptor
Image: Components included with the RØDE PSA1+ Professional Studio Arm.
Aufstellen
The PSA1+ offers two primary mounting options: a desk clamp for temporary or non-invasive installation, and a desk insert for a more permanent, flush mount.
Option 1: Desk Clamp Installation
- Identify a suitable location on your desk or table edge. Ensure the surface is sturdy and can support the weight of the arm and microphone.
- Stellen Sie den Schreibtisch clamp onto the edge of your desk.
- Tighten the screw mechanism on the clamp until it is securely fastened to the desk. Do not overtighten, as this may damage your desk.
- Insert the base of the PSA1+ arm into the top opening of the desk clamp.
Option 2: Desk Insert Installation (Permanent)
This option requires drilling a hole into your desk. Proceed with caution and ensure you have the necessary tools and expertise.
- Choose a desired location on your desk for the arm. Ensure there is sufficient clearance underneath for the insert.
- Using an appropriate drill bit (refer to the desk insert for exact diameter, typically around 22mm/0.87 inches), drill a clean hole through your desk.
- Insert the desk insert into the drilled hole from the top.
- Secure the insert from underneath the desk using the provided nut.
- Insert the base of the PSA1+ arm into the opening of the desk insert.
Attaching Your Microphone
- The PSA1+ features a standard microphone thread. If your microphone requires a 5/8" thread, use the included 3/8" to 5/8" adaptor.
- Carefully screw your microphone or microphone shock mount onto the threaded post at the end of the arm.
Image: RØDE PSA1+ with a microphone mounted, demonstrating typical setup.
Kabelmanagement
The PSA1+ includes integrated cable management channels to keep your setup tidy and professional.
- Route your microphone cable (XLR or USB) along the arm's channels.
- Secure the cable using the provided clips or ties to prevent tangling and maintain a clean aesthetic.
Image: Integrated cable management on the RØDE PSA1+ arm.
Operating the PSA1+
The PSA1+ is designed for smooth and silent operation, allowing for effortless microphone positioning.
Bewegung und Positionierung
- The parallelogram spring design allows for fluid movement across its entire range. Gently push or pull the arm to adjust the microphone's height and horizontal position.
- The arm offers 360-degree rotation at its base, providing maximum flexibility for microphone placement.
- The fully damped internal springs ensure that the arm remains stable in any position without drifting, and movement is virtually silent, preventing unwanted noise during recordings or broadcasts.
Image: Demonstrating the flexible positioning of the RØDE PSA1+.
Image: Detail of the smooth and silent movement mechanism.
Schwingungsisolation
The PSA1+ is designed to isolate your microphone from desk-borne noise, such as keyboard clicks or mouse movements.
Image: The PSA1+ base providing superior isolation from vibrations.
Wartung
To ensure the longevity and optimal performance of your RØDE PSA1+:
- Regularly wipe down the arm with a soft, dry cloth to remove dust and debris.
- Avoid using harsh chemicals or abrasive cleaners, as these can damage the finish or neoprene cover.
- Überprüfen Sie regelmäßig den festen Sitz der Schreibtischklemmen.amp or desk insert to ensure the arm remains secure.
- Ensure cables are properly routed through the management channels to prevent strain or damage.
Fehlerbehebung
| Ausgabe | Mögliche Ursache | Lösung |
|---|---|---|
| Arm feels loose or unstable | Schreibtisch klamp/insert is not tight enough. | Ziehen Sie die Schreibtischklammer festamp screw or the nut for the desk insert. |
| Microphone drifts from position | Arm springs may need adjustment (rare for PSA1+ due to damping). Microphone is too heavy for the arm's capacity. | Ensure microphone weight is within specified limits. If issue persists, contact RØDE support. |
| Audible noise from arm movement | Friction or debris in joints (unlikely for PSA1+). | Ensure no foreign objects are lodged in the arm's joints. The PSA1+ is designed for silent operation; if noise occurs, contact RØDE support. |
| Cables are tangled or visible | Falsche Kabelführung. | Reroute cables through the integrated cable management channels and secure them with clips. |
Technische Daten
- Modell: PSA1+
- Produktabmessungen (L x B x H): 21.25 x 8.25 x 3.25 Zoll
- Artikelgewicht: 3.4 Pfund
- Material: Neoprene (arm cover)
- Farbe: Schwarz
- Hersteller: RØDE Mikrofone
- Als Erstes verfügbar: 5. Oktober 2021
Garantie und Support
For information regarding warranty coverage, technical support, or service, please refer to the official RØDE Microphones webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
