SwellPro Fisherman Drone FD1 Benutzerhandbuch

Einführung

The SwellPro Fisherman Drone FD1 is a waterproof unmanned aerial vehicle designed for fishing applications. It enables shore-based anglers to extend casting range and deploy baits up to 2kg. This manual provides essential information for the safe and effective operation and maintenance of your SwellPro Fisherman Drone FD1.

Lieferumfang

Prüfen Sie beim Auspacken, ob alle Komponenten vorhanden sind:

• 1x SwellPro Fisherman Drone FD1 Aircraft
• 1x Fernbedienung
• 2x (pair) Propellers
• 1x Drohnenakku
• 1x Balance Charger
• 1x Mikro-USB-Kabel
• 1x PL1-F Payload Release Mechanism

Image: The SwellPro Fisherman Drone FD1, an orange and black waterproof drone with four propellers and landing gear.

Aufstellen

1. Propellermontage

Carefully attach the propellers to the corresponding motor shafts. Ensure they are securely fastened according to the markings (e.g., CW for clockwise, CCW for counter-clockwise) to prevent detachment during flight.

2. Akku laden und installieren

Before first use, fully charge the drone battery using the provided balance charger and Micro USB cable. Once charged, insert the battery into the drone's designated compartment, ensuring a secure connection.

3. Vorbereitung der Fernbedienung

Install the required batteries (not always included, check packaging) into the remote controller. Power on the controller and ensure it pairs successfully with the drone before attempting flight.

4. Pre-Flight Checks and Calibration

Always perform pre-flight checks. This includes verifying propeller security, battery levels for both drone and remote, and checking for any physical damage. Calibrate the compass and other sensors as instructed in the quick start guide to ensure accurate navigation and stable flight. The elevated GPS and altimeter pod design enhances precision and reduces interference.

Bedienung der Drohne

Grundlegende Flugsteuerung

Familiarize yourself with the remote controller's joysticks and buttons. Practice basic maneuvers in an open, safe area away from obstacles, people, and animals. The drone features Auto-Landing for safe descent.

Payload Release (PL1-F)

Image: The PL1-F Payload Release mechanism, a grey and black device designed to attach to the drone for dropping bait.

The PL1-F payload release allows for precise deployment of fishing baits or lines. Attach the payload securely to the mechanism. Operate the release function via the remote controller when the drone is positioned over the desired drop zone. The drone can carry payloads up to 2kg.

Sky-Trolling Feature

The Sky-Trolling feature allows the drone to tow your fishing line to attract pelagic fish. For enhanced safety and line protection, consider using the optional TrollSafe release device, which automatically releases the line upon a strike. Adjust TrollSafe sensitivity based on fishing conditions.

Bild: Eine Luftaufnahme view showing the orange SwellPro drone on a sandy beach surrounded by several fish, illustrating its use in fishing.

Image: A person on a beach holding a large fish and the SwellPro Fisherman Drone, demonstrating successful fishing with the drone.

Windbeständigkeit

The drone's propulsion system and flight computer are optimized for flight in winds up to Beaufort Force 7. Always assess wind conditions before flight to ensure safe operation.

Anti-Pendulum Feature

When carrying a payload, drones may exhibit a pendulum motion. The Anti-Pendulum Feature on the Fisherman Drone reduces this effect by controlling acceleration and deceleration, leading to more stable payload delivery.

Wasserdichtes Design

The SwellPro Fisherman Drone is designed to be waterproof, allowing for operation near and over water bodies. Ensure all seals and covers are properly secured before exposing the drone to water.

Wartung

Regelmäßige Wartung gewährleistet die Langlebigkeit und optimale Leistung Ihrer Drohne.

• Reinigung: After each use, especially in sandy or saltwater environments, thoroughly clean the drone. Pay close attention to motors, propeller mounts, and any crevices to remove sand, salt, or debris. Sand can cause wear and tear on moving parts.
• Batteriepflege: Store batteries in a cool, dry place. Do not overcharge or over-discharge. If storing for extended periods, charge to approximately 50% capacity.
• Propellerinspektion: Regularly inspect propellers for cracks, chips, or deformation. Replace damaged propellers immediately to maintain flight stability and safety.
• Allgemeine Inspektion: Periodically check all screws, connections, and structural components for looseness or damage.

Fehlerbehebung

In diesem Abschnitt werden häufig auftretende Probleme behandelt.

• Drohne lässt sich nicht einschalten: Ensure the battery is fully charged and correctly installed. Check for any visible damage to the battery or drone's power port.
• Fernbedienung verbindet sich nicht: Verify both the drone and remote controller are powered on. Ensure they are within range and attempt to re-pair them according to the quick start guide.
• Instabiler Flug/Abdriften: Perform a compass and IMU calibration. Check propellers for damage or incorrect installation. Ensure the drone is free of debris, especially sand, which can affect motor performance.
• Payload Release Malfunction: Check the connection of the PL1-F unit to the drone. Ensure no debris is obstructing the release mechanism.
• GPS-Signalprobleme: Stellen Sie sicher, dass Sie sich in einem offenen Bereich mit freier Sicht befinden. view of the sky. Avoid flying near large metal structures or strong electromagnetic interference.

If issues persist, contact SwellPRO customer support for further assistance.

Technische Daten

Garantie und Support

SwellPRO products are covered by a manufacturer's warranty. For detailed warranty information, product support, or service inquiries, please refer to the official SwellPRO webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundendienst. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.