ApooDr ASF16-18H2B

ApooDr 18000 BTU Mini-Split-Klimaanlage mit Inverter-System (kanallos) – Benutzerhandbuch

Model: ASF16-18H2B | Brand: ApooDr

1. Einleitung und Produktübersichtview

The ApooDr 18000 BTU Mini Split Air Conditioner with Heat Pump is an advanced, energy-efficient system designed to provide optimal climate control for your space. Featuring inverter technology, it offers both powerful cooling and effective heating, suitable for areas up to 1000 sq ft. This system operates quietly and includes a comprehensive installation kit for convenience. Please read this manual thoroughly before installation and operation to ensure safe and efficient use.

ApooDr 18000 BTU Mini Split Air Conditioner with indoor unit, outdoor unit, and remote control.

Figure 1.1: Complete ApooDr Mini Split Air Conditioner System with indoor unit, outdoor unit, remote, and installation accessories.

2. Packungsinhalt

Upon unpacking, please verify that all components listed below are present and in good condition. If any items are missing or damaged, contact customer support immediately.

  • Innengerät
  • Außengerät
  • Backlit LCD Remote Control
  • Pre-flared, Insulated Copper Line Set (approx. 16 FT)
  • Kommunikationskabel
  • Installation Accessories (e.g., drain hose, wall sleeve)
Image showing the indoor unit, outdoor unit, communication wires, pre-flared insulated copper line set, and remote control included in the package.

Figure 2.1: Visual representation of the main components included in your order.

3. Einrichtung und Installation

Professionelle Installation ist erforderlich for this mini split system to ensure proper function, safety, and warranty validity. Incorrect installation can lead to system malfunction, property damage, or personal injury.

3.1 Checkliste vor der Installation

  • Ensure the installation area meets local building codes and regulations.
  • Verify electrical supply (220V/60Hz) is compatible and sufficient.
  • Confirm proper drainage for condensate.
  • Ensure adequate clearance around both indoor and outdoor units for airflow and maintenance.

3.2 Installationsschritte (Überview)

While professional installation is mandatory, a general overview Der Prozess umfasst Folgendes:

  1. Mounting the indoor unit on the wall.
  2. Installing the outdoor unit on a stable, level surface.
  3. Connecting the pre-flared copper line set between the indoor and outdoor units.
  4. Connecting electrical wiring and communication cables.
  5. Vacuuming the refrigerant lines to remove air and moisture.
  6. Checking for leaks and performing a test run.

Eine detaillierte, schrittweise Installationsanleitung finden Sie auf der offiziellen Website. Installationshandbuch (PDF).

A person giving a thumbs up next to an installed indoor mini split unit and an outdoor unit, indicating successful installation.

Abbildung 3.1: Bspample of a professionally installed ApooDr Mini Split System.

4. Betriebsarten

The ApooDr Mini Split system offers five distinct operating modes to ensure your comfort in various conditions. All modes are easily accessible and controllable via the included backlit LCD remote.

4.1 Verfügbare Modi

  • Automatikmodus: The system automatically selects the appropriate operating mode (Cool, Heat, or Fan) based on the set temperature and current room temperature.
  • Kühlmodus: Provides cooling to lower the room temperature. Adjustable from 62℉ (16.7℃) to 90℉ (32.2℃).
  • Trockenmodus (Entfeuchtung): Reduziert die Luftfeuchtigkeit im Raum ohne signifikante Temperaturänderung.
  • Wärme-Modus: Provides heating to raise the room temperature. Adjustable from 32℉ (0℃) to 86℉ (30℃).
  • Gebläsemodus: Circulates air without heating or cooling. Fan speed can be adjusted.

4.2 Fernbedienungsfunktionen

The backlit LCD remote allows you to:

  • Schalten Sie das Gerät EIN/AUS.
  • Betriebsmodi auswählen.
  • Passen Sie die Temperatureinstellungen an.
  • Lüftergeschwindigkeit steuern.
  • Set timer functions (Timer ON/OFF).
  • Activate Sleep mode for quiet operation and energy saving.
  • Control oscillation (swing) of the air deflector.
  • Access special features like Turbo, Clean, LED display control, and Follow Me function.
Image showing the indoor unit with air flowing out, indicating both cooling and heating capabilities, and listing the five operating modes: Auto, Cool, Dry, Heat, and Fan.

Figure 4.1: The ApooDr Mini Split system offers 5 versatile operating modes for year-round comfort.

Close-up image of the backlit LCD remote control for the ApooDr Mini Split Air Conditioner, showing various function buttons and the digital display.

Figure 4.2: The intuitive backlit LCD remote control for easy system management.

5. Wartung

Regular maintenance ensures the longevity and efficient operation of your ApooDr Mini Split system. Always turn off the power to the unit before performing any maintenance.

5.1 Luftfilterreinigung

The indoor unit is equipped with a permanently washable and easy-to-clean air filter. Regular cleaning of the air filter is crucial for maintaining air quality and system efficiency.

  • Frequenz: Reinigen Sie den Filter alle zwei Wochen oder je nach Nutzung und Luftqualität auch häufiger.
  • Schritte:
    1. Öffnen Sie die Frontplatte der Inneneinheit.
    2. Gently remove the air filter(s).
    3. Wash the filter(s) with lukewarm water and a mild detergent.
    4. Rinse thoroughly and allow to air dry completely before re-installing. Do not expose to direct sunlight.
    5. Re-install the dry filter(s) and close the front panel.

5.2 Wartung der Außeneinheit

Periodically inspect the outdoor unit for any obstructions (leaves, debris) around the condenser coils and fan. Gently clear any blockages to ensure proper airflow. Professional cleaning of the outdoor coil may be required annually.

6. Fehlerbehebung

If you encounter issues with your ApooDr Mini Split system, please refer to the official Leitfaden zur Fehlerbehebung (PDF) Detaillierte Lösungen finden Sie hier. Nachfolgend einige häufige Probleme und allgemeine Hinweise:

6.1 Häufige Probleme und Lösungen

  • Gerät schaltet sich nicht ein: Check power supply, circuit breaker, and ensure the remote control batteries are not depleted.
  • Unzureichende Kühlung/Heizung: Verify correct mode selection and temperature setting. Clean air filters. Ensure no obstructions to airflow. Check for ice on the outdoor unit (in heating mode, during defrost cycle).
  • Ungewöhnliche Geräusche: Minor noises during operation are normal. Excessive or unusual noises may indicate a problem; consult the troubleshooting guide or a professional.
  • Wasseraustritt aus dem Innengerät: Check the condensate drain line for blockages or improper slope.

If problems persist after consulting the troubleshooting guide, contact a qualified HVAC technician or ApooDr customer support.

7. Spezifikationen

Key technical specifications for the ApooDr 18000 BTU Mini Split Air Conditioner (Model: ASF16-18H2B):

BesonderheitSpezifikation
Kühlleistung18000 BTU
Heizleistung18000 BTU
SEER2 (Saisonale Energieeffizienzquote 2)18.3
HSPF2 (Saisonbedingter Heizleistungsfaktor 2)8.70
Bandtage208/230V / 60Hz
AbdeckungsbereichBis zu 1000 m²
Geräuschpegel (Innenbereich)30 dB
KältemitteltypPre-Charged R-410A
Indoor Working Temperature (Cooling)62℉ ~ 90℉ (16.7℃ ~ 32.2℃)
Indoor Working Temperature (Heating)32℉ ~ 86℉ (0℃ ~ 30℃)
Outdoor Working Temperature (Cooling)5℉ ~ 122℉ (-15℃ ~ 50℃)
Outdoor Working Temperature (Heating)5℉ ~ 86℉ (-15℃ ~ 30℃)
ZertifizierungenAHRI Certified & UL Certified

8. Garantie und Support

8.1 Produktgarantie

The ApooDr Mini Split Air Conditioner comes with the following warranty coverage:

  • Kompressor: 5 Jahr Garantie
  • Teile: 2 Jahr Garantie

Please retain your proof of purchase for warranty claims. The warranty is valid only with professional installation.

8.2 Kundendienst

For any questions, technical assistance, or warranty claims, please contact ApooDr customer support. Refer to the contact information provided with your product packaging or visit the official ApooDr webWebsite für Supportdetails.

Zugehörige Dokumente - ASF16-18H2B

Vorview ApooDr ASF16 Serie Klimaanlage – Bedienungs- und Installationsanleitung
Ausführlicher Leitfaden für ApooDr-Klimaanlagen der ASF16-Serie mit Informationen für den Besitzer, Installationsanleitung, Wartung, Fehlerbehebung und technischen Daten. Erfahren Sie, wie Sie Ihre ApooDr-Klimaanlage sicher installieren und bedienen.
Vorview ApooDr Split-Klimaanlage – Bedienungsanleitung & Installationsanleitung
Ausführlicher Leitfaden für ApooDr Split-Klimageräte mit Sicherheitshinweisen, Gerätespezifikationen, Funktionen, Pflege und Wartung, Fehlerbehebung, Zubehör und detaillierten Installationsanleitungen für Innen- und Außengeräte. Inklusive Anleitungen zum Anschluss der Kältemittelleitungen, zur Luftabsaugung, zu elektrischen Prüfungen und zum Probelauf.
Vorview Bedienungsanleitung für ApooDr Split-Klimaanlagen
Diese Bedienungsanleitung enthält wichtige Informationen und Empfehlungen für die ordnungsgemäße Installation, den Betrieb und die Wartung der ApooDr Split-Klimaanlage, um optimale Leistung und Langlebigkeit zu gewährleisten.
Vorview ApooDr Kanal-Wärmepumpen-Split-System – Eingeschränkte Garantieerklärung
Offizielle eingeschränkte Garantieerklärung für ApooDr Kanal-Wärmepumpen-Split-Systeme mit detaillierten Angaben zu Umfang, Einschränkungen und Produktregistrierungsanforderungen.
Vorview ApooDr AHU3G-24HFN-AB Serie Klimaanlagen-Abmessungsleitfaden
Detaillierte Maßangaben in Zoll für die Klimaanlagen der Serie ApooDr AHU3G-24HFN-AB, einschließlich Innen- und Außengerät. Gilt für die Modelle AHU3G-24HFN-AB-50FT, AHU3G-24HFN-AB-25FT und CAC-24k.
Vorview ApooDr AHU 3rd Gen 3D Inverter Series Luftaufbereitungsgerät – Servicehandbuch
Servicehandbuch für die ApooDr AHU 3rd Gen 3D Inverter Series Luftaufbereitungsgeräte, einschließlich Installation, Betrieb, Fehlersuche und Sicherheitsvorkehrungen für die Modelle AHU3G-24HFN-A bis AHU3G-60HFN-A.