DVDO DVDO-Splitter-14

DVDO 1x4 HDMI-Splitter mit HDR – Benutzerhandbuch

Model: DVDO-Splitter-14

1. Einleitung

The DVDO 1x4 HDMI Splitter with HDR is designed to distribute a single HDMI input signal to four separate HDMI outputs simultaneously. This device supports resolutions up to 4K@60Hz with 4:4:4 chroma subsampling, ensuring high-quality video transmission. It is fully compliant with HDMI 2.0b and HDCP 2.2 specifications, making it compatible with the latest audio and video standards. A built-in scaler allows individual outputs to automatically scale down to 1080P if connected to displays with lower resolution capabilities, providing an optimal signal for each attached display.

2. Funktionen

  • HDMI Splitter 1 in 4 out: Distributes one HDMI input signal to four HDMI displays while maintaining signal quality.
  • Hohe Bandbreite: Compliant with HDMI 2.0b and HDCP 2.2 with 18Gbps bandwidth.
  • Erweiterte Audiounterstützung: Fully supports audio formats in HDMI 2.0 specification, including PCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, and DTS:X.
  • Individual Output Scaling: Each HDMI output supports scaling down to 1080P individually (frame rate remains unchanged when scaling from 4K to 1080P).
  • Signalregeneration: Features automatic input cable equalization for signal regeneration compensation.
  • HDR and 3D Support: Supports High Dynamic Range (HDR) and 3D content.

3. Packungsinhalt

Please verify that all items listed below are included in your package. If any items are missing or damaged, please contact DVDO customer support.

DVDO 1x4 HDMI Splitter and included accessories

Image: The DVDO 1x4 HDMI Splitter with its power adapter and various international plug adapters, along with mounting brackets.

  • DVDO 1x4 HDMI Splitter Unit
  • 5V DC Netzteil
  • Montagehalterungen (2)
  • Befestigungsschrauben
  • Benutzerhandbuch (dieses Dokument)

4. Einrichtung und Installation

Follow these steps to properly set up your DVDO 1x4 HDMI Splitter:

Diagram showing a Blu-ray player connected to the HDMI splitter input, and four displays connected to the HDMI splitter outputs.

Image: Connection diagram illustrating how to connect a source device (e.g., Blu-ray Player) to the HDMI IN port and multiple display devices to the HDMI OUT ports.

  1. Geräte ausschalten: Ensure all source devices (e.g., Blu-ray player, gaming console) and display devices (e.g., TV, projector) are powered off before making connections.
  2. Connect Source: Connect an HDMI cable from your source device's HDMI output to the HDMI IN port on the DVDO 1x4 HDMI Splitter.
  3. Displays verbinden: Schließen Sie HDMI-Kabel vom HDMI OUT 1, 2, 3, and 4 ports on the splitter to the HDMI inputs of your respective display devices.
  4. Strom anschließen: Stecken Sie den mitgelieferten 5V-Gleichstromadapter in den Gleichstrom 5 V port on the splitter, then plug the adapter into a standard electrical outlet.
  5. Einschalten: Power on your display devices first, then your source device, and finally the DVDO 1x4 HDMI Splitter. The splitter will automatically detect the input signal and distribute it to all connected displays.

5. Bedienungsanleitung

The DVDO 1x4 HDMI Splitter is designed for plug-and-play operation. Once all connections are made and power is supplied, the unit will automatically detect the input signal and replicate it across all four outputs.

Front view of the DVDO 1x4 HDMI Splitter showing the HDMI IN and HDMI OUT ports.

Bild: Eine Nahaufnahme view of the front panel of the DVDO 1x4 HDMI Splitter, highlighting the HDMI IN port and the four HDMI OUT ports.

  • Signalverteilung: The splitter will mirror the input signal to all four connected displays.
  • Automatic Scaling: If a connected display has a lower resolution than the source, the splitter will automatically scale down the signal for that specific output to ensure compatibility (e.g., 4K input to 1080P output).
  • LED-Anzeigen: The unit may feature LED indicators for power and active HDMI connections. Refer to the device itself for specific indicator locations and meanings.

6. Wartung

To ensure optimal performance and longevity of your DVDO 1x4 HDMI Splitter, follow these simple maintenance guidelines:

  • Reinigung: Reinigen Sie die Außenseite des Geräts mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reiniger oder Sprays.
  • Belüftung: Stellen Sie sicher, dass das Gerät in einem gut belüfteten Bereich aufgestellt wird, um eine Überhitzung zu vermeiden. Blockieren Sie keine Lüftungsöffnungen.
  • Umfeld: Keep the splitter away from direct sunlight, heat sources, and excessive moisture.
  • Kabelmanagement: Ensure HDMI cables are not excessively bent or strained, as this can affect signal quality.
  • Stromabschaltung: Wenn das Gerät längere Zeit nicht benutzt wird, trennen Sie es vom Stromnetz.

7. Fehlerbehebung

If you encounter issues with your DVDO 1x4 HDMI Splitter, please refer to the following table for common problems and solutions:

ProblemMögliche UrsacheLösung
Kein Bild angezeigtNo power to splitter; Loose HDMI cables; Incorrect input selected on TV; HDCP issue.Check power connection and adapter. Ensure all HDMI cables are securely connected. Select the correct HDMI input on your display. Power cycle all devices (source, splitter, displays).
Bildflackern oder intermittierendes SignalPoor quality HDMI cables; Cable length too long; Signal interference.Use high-quality, certified HDMI 2.0b cables. Try shorter HDMI cables if possible. Ensure cables are not near strong electrical interference sources.
Kein TonAudio format not supported by display; Loose HDMI cable.Verify your display supports the audio format being sent. Check HDMI cable connections.
One display works, others do notFaulty HDMI cable to specific display; Display compatibility issue.Swap HDMI cables to isolate the issue. Check if the non-working display supports the resolution/refresh rate. Try connecting only the problematic display to an output.
4K signal not displayed correctlyDisplay does not support 4K@60Hz 4:4:4; HDMI cable not rated for 4K.Ensure your display supports the full 4K@60Hz 4:4:4 specification. Use Premium High-Speed HDMI cables.

If the problem persists after trying these solutions, please contact DVDO customer support for further assistance.

8. Spezifikationen

Detailed technical specifications for the DVDO 1x4 HDMI Splitter:

BesonderheitSpezifikation
ModellDVDO-Splitter-14
HDMI-KonformitätHDMI 2.0b
HDCP-KonformitätHDCP 2.2
Videobandbreite18 Gbit/s
Unterstützte AuflösungenUp to 4K@60Hz (4:4:4 Chroma SubsampLing)
Farbtiefe8-Bit, 10-Bit, 12-Bit
HDR-UnterstützungJa
3D-UnterstützungJa
AudioformatePCM, Dolby TrueHD, Dolby Atmos, DTS-HD Master Audio, DTS:X
Eingangsanschlüsse1 x HDMI Typ A
Ausgangsanschlüsse4 x HDMI Typ A
StromversorgungGleichstrom 5 V
Abmessungen (L x B x H)7.64 x 6.22 x 1.89 Zoll (ca.)
Gewicht1.2 Pfund (ca.)
FarbeSchwarz

9. Garantie und Support

DVDO products are designed for reliability and performance. This product comes with a standard manufacturer's warranty against defects in materials and workmanship. The specific duration and terms of the warranty may vary by region and purchase date. Please retain your proof of purchase for warranty claims.

For technical support, troubleshooting assistance, or warranty inquiries, please contact DVDO customer service through the official DVDO website or your point of purchase. You may also find additional resources and FAQs on the DVDO support page.

Online-Hilfe: Visit the official DVDO webSite für Supportressourcen.

Kontaktinformationen: Refer to your product packaging or the DVDO webDie aktuellsten Kontaktdaten finden Sie auf der Website.

Zugehörige Dokumente - DVDO-Splitter-14

Vorview DVDO-AudioE-3 8K HDMI Audio Extractor mit eARC – Benutzerhandbuch
Benutzerhandbuch für den DVDO-AudioE-3, einen 8K HDMI 2.1 Audio-Extraktor mit eARC für Soundbars. Enthält Informationen zu Einrichtung, technischen Daten und Bedienung.
Vorview DVDO-AudioEMB-1 HDMI 18Gbps Audio Embedder with HDCP 2.2 User Manual
User manual for the DVDO-AudioEMB-1, an 18Gbps HDMI audio embedder with HDCP 2.2 support. Details features, specifications, operation, and application examples for seamless audio integration.
Vorview DVDO-Matrix-22 4K 2x2 HDMI Matrix-Switcher – Benutzerhandbuch
Benutzerhandbuch für den DVDO-Matrix-22, einen 4K 2x2 HDMI-Matrix-Switcher mit Audioausgängen und HDR-Unterstützung. Detaillierte Informationen zu Funktionen, Spezifikationen, Bedienung, Funktionen der Infrarot-Fernbedienung, FAQs und Anwendungsbeispielen.ampDateien für eine nahtlose AV-Verteilung.
Vorview DVDO-HDMI-MGR-1 4K HDMI Manager Benutzerhandbuch
Benutzerhandbuch für den DVDO-HDMI-MGR-1, einen 18-Gbit/s-HDMI-Manager mit EDID- und HDCP-Verwaltung, der 4K@60 4:4:4 und HDCP2.2 unterstützt und über HDMI oder USB-C mit Strom versorgt wird.
Vorview DVDO-Matrix-42-HDBT Benutzerhandbuch: 4K 4x2 Matrix-Switcher-Anleitung
Benutzerhandbuch für den DVDO-Matrix-42-HDBT, einen 4K 4x2 Matrix-Switcher mit HDMI- und HDBaseT-Ein-/Ausgängen. Enthält Spezifikationen, Einrichtung, Bedienung und Fehlerbehebung.
Vorview DVDO-CAT4K-50 User Manual: 4K60 HDMI Extender Over Ethernet
Comprehensive user manual for the DVDO-CAT4K-50, detailing its features, specifications, and operation for extending 4K60 HDMI signals up to 50 meters over Ethernet with HDR and PoC support.