1. Einführung und Endeview
This manual provides essential information for the safe and efficient installation, operation, and maintenance of your Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp. This LED luminaire features an integrated light sensor and is designed for general purpose lighting in various indoor environments, including stairs, entrance areas, bathrooms, and hallways. It offers significant energy savings compared to traditional CFL lamps.
Image 1.1: Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp. This image shows the circular LED luminaire, designed for surface mounting on walls or ceilings.
2. Sicherheitshinweise
Bitte lesen Sie vor Installation und Inbetriebnahme alle Sicherheitshinweise sorgfältig durch. Die Nichtbeachtung dieser Hinweise kann zu Stromschlag, Brand oder anderen Gefahren führen.
- Installation must be performed by a qualified electrician in accordance with national wiring regulations.
- Ensure the power supply is disconnected before installation, maintenance, or any adjustments.
- Do not modify the product in any way. Unauthorized modifications may void the warranty and create safety risks.
- This product is rated IP44, making it suitable for environments where it may be exposed to splashing water, such as bathrooms. However, it is not suitable for immersion in water.
- Die Leuchte darf nicht mit Isoliermaterial abgedeckt werden.
- Die Lichtquelle dieser Leuchte ist nicht austauschbar; wenn die Lichtquelle das Ende ihrer Lebensdauer erreicht hat, muss die gesamte Leuchte ersetzt werden.
3. Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden und unbeschädigt sind.
- 1 x Ledvance SF CIRC 250 SEN V 13W 830 IP44 Wall and Ceiling Lamp
- Montagezubehör (Schrauben, Dübel)
- Bedienungsanleitung
Image 3.1: Product packaging for the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire. The box displays product information and certifications.
4. Einrichtung und Installation
Installation is designed to be simple and quick, without requiring specialized tools beyond basic electrical equipment.
- Vorbereitung: Disconnect the main power supply to the installation area at the circuit breaker. Use a voltagTester, um zu bestätigen, dass die Stromversorgung ausgeschaltet ist.
- Montageort: Choose a suitable wall or ceiling location. Ensure the surface is flat and can support the weight of the luminaire (390g).
- Markieren und Bohren: Use the luminaire's base as a template to mark the drilling points for the mounting screws. Drill holes of appropriate size for the provided wall plugs.
- Verdrahtung: Connect the electrical wires from the ceiling/wall to the luminaire's terminal block. Ensure correct polarity (Live, Neutral, Earth) as indicated on the luminaire. Secure all connections tightly.
- Mounting the Luminaire: Secure the luminaire base to the wall or ceiling using the provided screws and wall plugs.
- Anbringen des Diffusors: Carefully attach the acrylic diffuser cover to the luminaire base, ensuring it is securely fastened to maintain the IP44 rating.
- Einschalten: Restore power at the circuit breaker. The luminaire should now be ready for operation.
5. Bedienungsanleitung
This luminaire features an integrated light sensor for automatic operation. The sensor's range, daylight detection threshold, and light duration can be adjusted.
5.1 Sensoreinstellung
The sensor settings are typically adjusted via small dials or switches located on the luminaire's internal module, accessible after removing the diffuser. Refer to the specific markings on your device for precise adjustment points.
- Sensorbereich: Adjusts the detection area of the motion sensor.
- Daylight Detection (Lux): Sets the ambient light level at which the sensor will activate the lamp. Zum Beispielample, a lower lux setting means the lamp will turn on even in brighter conditions, while a higher lux setting means it will only activate in darker conditions.
- Leuchtdauer: Determines how long the lamp remains illuminated after motion is detected and no further motion is sensed.
Experiment with these settings to find the optimal configuration for your specific application.
6. Wartung
The Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire requires minimal maintenance.
- Reinigung: Disconnect power before cleaning. Wipe the exterior of the luminaire with a soft, damp cloth. Do not use abrasive cleaners or solvents, as these can damage the acrylic material.
- Inspektion: Periodically check for any signs of damage to the housing or diffuser. If damage is found, disconnect power and contact a qualified electrician for inspection or replacement.
- Lichtquelle: The integrated LED light source is not user-replaceable. If the light source fails, the entire luminaire must be replaced.
7. Fehlerbehebung
If you encounter issues with your luminaire, refer to the following troubleshooting guide:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Lampe schaltet sich nicht ein. | Keine Stromversorgung. Fehlerhafte Verkabelung. Die Sensoreinstellungen sind fehlerhaft. | Leistungsschalter prüfen. Überprüfen Sie die Verdrahtungsanschlüsse (ziehen Sie einen Elektriker hinzu). Adjust daylight detection (Lux) setting. |
| Luminaire stays on continuously. | Kontinuierliche Bewegung im Erfassungsbereich. Die Sensoreinstellungen sind fehlerhaft. Fehlfunktion des Sensors. | Ensure no continuous motion. Adjust light duration or daylight detection (Lux) setting. Wenden Sie sich an den Support, falls das Problem weiterhin besteht. |
| Luminaire turns on too frequently/infrequently. | Sensor range or daylight detection settings are not optimal. | Adjust sensor range and daylight detection (Lux) settings to suit the environment. |
If the problem persists after attempting these solutions, please contact Ledvance customer support.
8. Spezifikationen
Detailed technical specifications for the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire.
| Besonderheit | Spezifikation |
|---|---|
| Modellnummer | SF CIRC 250 SEN V 13W 830 IP44 LEDV |
| Marke | GEMEINSAMER VANCE |
| Typ | Wand und Decke Lamp with Integrated Light Sensor |
| Energieaufnahme | 13 Watt |
| Lichtstrom | 920 Lumen |
| Farbtemperatur | 3000 Kelvin (Warmweiß) |
| Abstrahlwinkel | 120 Grad |
| Durchschnittliche Lebensdauer | 30,000 Stunden |
| Bandtage | 240 V Wechselspannung |
| IP-Schutzart | IP44 (spritzwassergeschützt) |
| Material | Acryl |
| Abmessungen (Durchmesser x Höhe) | 250 mm x 91 mm |
| Gewicht | 390 Gramm |
| Energieklasse | G |
| Besondere Merkmale | Energy-saving, Integrated Light Sensor |
Image 8.1: Dimensional drawing of the Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire, showing a diameter of 250mm and a height of 91mm.
Image 8.2: Polar light distribution diagram for the luminaire, illustrating the 120-degree beam angle and light intensity distribution.
Image 8.3: Illuminance cone diagram showing light levels (lux) at various distances from the luminaire, along with half beam angles.
9. Garantie und Support
For warranty information and customer support, please refer to the official Ledvance website or contact your local Ledvance distributor. Keep your purchase receipt as proof of purchase for any warranty claims.
Ledvance Contact Information:
- Besuchen Sie die LEDVANCE Store auf Amazon für Produktinformationen.
- Refer to the official Ledvance website for global support contacts.
10. Anwendungsbeispielamples
The Ledvance SF CIRC 250 SEN V 13W 830 IP44 luminaire is versatile and suitable for various indoor applications.
Abbildung 10.1: Beispielamples of suitable environments including parking garages, building entrances, and office spaces.
Image 10.2: Additional application examples showing the luminaire in a modern office setting, a classroom, and a gymnasium.
