1. Einleitung
The Xetron STC-1000Pro is a versatile digital temperature controller designed for precise temperature management in various environments. It features dual outlets for simultaneous heating and cooling control, a wide temperature range, and user-friendly operation. This manual provides detailed instructions for setting up, operating, and maintaining your device.
Figure 1: Xetron STC-1000Pro Digital Temperature Controller. This image displays the main unit with its digital display, control buttons, power cord, temperature sensor, and the dual-outlet power strip for heating and cooling devices.
Anwendungen
The STC-1000Pro is suitable for a wide range of applications requiring accurate temperature control, including:
- Reptiliengehege und Terrarien
- Hausbrauen und Gärung
- Inkubatoren
- Gewächshäuser
- Aquarien
- Kühlschränke
Figure 2: Common applications for the Xetron STC-1000Pro. This image illustrates the controller's use in home brewing, incubators, aquariums, and flower cultivation, highlighting its versatility.
2. Hauptmerkmale
- Ideal Temperature Control: Two outlets allow simultaneous or separate connection of heating and cooling equipment for automatic temperature switching. Wide control range of -40 to 230 ℉ (-40 to 110 ℃) with a temperature accuracy of ±1 ℃ / ±2 ℉.
- Benutzerfreundliches Design: Simple 3-button operation and pre-wired design for plug-and-play functionality. Large display for easy real-time data reading.
- Doppeltes Alarmsystem: Adjustable high/low temperature alarms with audible beeps and a bell icon on the display, ensuring timely alerts even when not near the device.
- Anpassbare Parameter: Supports settings for ℃/℉ unit switching, temperature calibration, high and low alarm values, start delay, and protection time (cooling mode only).
- Sicherheit und Qualität: Constructed from V-0 flame-retardant ABS material. Features compressor delay protection and complies with CE and FCC standards for safe operation.
- IP65 Wasserdichte Sonde: The temperature probe head can be immersed in fresh water, and the main unit features an internal rubber ring to prevent water ingress.
Figure 3: Temperature control range of the Xetron STC-1000Pro. This image highlights the controller's ability to maintain temperatures within a desired range of -40 to 230 ℉ using both cooling and heating devices.
Figure 4: Large screen display of the Xetron STC-1000Pro. The image shows the display dimensions and labels for PV (Present Value), SV (Set Value), Csp (Cooling Start Point), and Hsp (Heating Start Point), indicating ℃/℉ switchability.
Figure 5: Visual and audible alert features. This image illustrates the double alarm and delay protection functionalities of the controller, enhancing safety and monitoring.
Figure 6: Safety and quality certifications. The image highlights the V-0 flame-retardant ABS material and compliance with CE, FCC, and RoHS standards, ensuring product safety.
Figure 7: IP65 waterproof features. This image demonstrates the waterproof capability of the temperature probe, which can be immersed in fresh water, and the internal rubber ring for main unit protection.
3. Einrichtungsanweisungen
- Packen Sie das Gerät aus: Carefully remove the Xetron STC-1000Pro controller and its components from the packaging.
- Schließen Sie den Sensor an: Ensure the temperature sensor is fully inserted into its dedicated port on the side of the controller. A loose connection can lead to "ERR" display.
- Positionieren Sie den Sensor: Place the temperature probe in the environment where temperature monitoring and control are required. Ensure it is not directly exposed to heating or cooling elements to get an accurate reading.
- Heiz-/Kühlgeräte anschließen:
- Plug your heating device (e.g., heat lamp, heating mat) into the socket labeled "HEATING".
- Plug your cooling device (e.g., fan, chiller) into the socket labeled "COOLING".
Wichtig: The maximum output for each socket is 10A at 240VAC. Do not connect high-power equipment exceeding these limits.
- Einschalten: Plug the controller's main power cord into a standard 230V AC power outlet. The display will illuminate, showing the current temperature (PV) and other settings.
Figure 8: Plug-and-play setup of the Xetron STC-1000Pro. This image demonstrates the simplicity of connecting the controller, showing it mounted on a wall next to a terrarium, with heating/cooling devices plugged in.
4. Bedienungsanleitung
The STC-1000Pro features a simple 3-button interface: SATZ, AUF (▲), Und UNTEN (▼).
4.1 Anzeige überview
- PV (Present Value): Displays the current measured temperature.
- SV (Set Value): Displays the target temperature you wish to maintain.
- Csp (Cooling Start Point): The temperature at which the cooling device will activate.
- Hsp (Heating Start Point): The temperature at which the heating device will activate.
4.2 Einstellen der Zieltemperatur (SV)
- Drücken Sie die SATZ button once. The SV value will flash.
- Verwenden Sie die AUF (▲) or UNTEN (▼) Tasten zur Einstellung der Zieltemperatur.
- Drücken SATZ Um die Einstellung zu bestätigen und zu speichern, klicken Sie erneut oder warten Sie einige Sekunden, bis sie automatisch gespeichert wird.
4.3 Erweiterte Parametereinstellungen
Um auf die erweiterten Einstellungen zuzugreifen, halten Sie die Taste gedrückt. SATZ button for approximately 3 seconds until the display changes to show parameter codes.
Figure 9: Diagram illustrating parameter settings. This image shows the relationship between TS (Temperature Set-point), CD (Cooling Differential), HD (Heating Differential), Csp (Cooling Start Point), and Hsp (Heating Start Point).
Verwenden Sie die AUF (▲) or UNTEN (▼) buttons to navigate through the parameters. Press SATZ to enter a parameter's value, then use AUF (▲) or UNTEN (▼) sich anzupassen und SATZ wieder zu speichern.
| Parameter | Beschreibung | Reichweite | Standard |
|---|---|---|---|
| TS (Temperature Set-point) | The desired target temperature (same as SV). | -40 bis 110 ℃ / -40 bis 230 ℉ | Variiert |
| CD (Cooling Differential) | The difference between the cooling start point (Csp) and the set temperature (TS). Cooling activates when PV ≥ TS + CD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| HD (Heating Differential) | The difference between the heating start point (Hsp) and the set temperature (TS). Heating activates when PV ≤ TS - HD. | 0.1 to 30 ℃ / 0.1 to 54 ℉ | 2 ℃ / 3.6 ℉ |
| PT (Protection Time) | Compressor delay protection time (in minutes) for cooling mode only. Prevents frequent compressor cycling. | 0 bis 10 Minuten | 3 Мinuten |
| CA (Temperature Calibration) | Adjusts the temperature reading to match an external reference thermometer. | -10 bis 10 ℃ / -18 bis 18 ℉ | 0 ℃ / 0 ℉ |
| CF (Unit Switch) | Switches between Celsius (℃) and Fahrenheit (℉). | C / F | C |
| HA (High Alarm) | Sets the upper temperature limit for the alarm. | TS to 110 ℃ / TS to 230 ℉ | 110 ℃ / 230 ℉ |
| LA (Low Alarm) | Sets the lower temperature limit for the alarm. | -40 ℃ / -40 ℉ to TS | -40 ℃ / -40 ℉ |
After adjusting parameters, press and hold SATZ again for 3 seconds to exit the advanced settings menu and return to normal operation.
5. Wartung
- Reinigung: Disconnect the power before cleaning. Wipe the controller's surface with a soft, damp cloth. Do not use abrasive cleaners or immerse the main unit in water. The temperature probe can be cleaned with water.
- Lagerung: Store the device in a dry environment within the temperature range of -20 ℃ to 75 ℃ (-4 ℉ to 167 ℉) to ensure the longest possible lifespan.
- Sensorpflege: Ensure the temperature sensor cable is not pinched or damaged. A damaged sensor can lead to inaccurate readings or error messages.
6. Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Auf dem Bildschirm wird „ERR“ angezeigt | Temperature sensor not fully inserted or damaged; temperature exceeds measurement range. | Ensure the sensor is fully inserted into its port. If the issue persists, the sensor may be faulty and require replacement. If the temperature is outside the -40 to 110 ℃ range, the controller will display "ERR". |
| Alarm sounds and bell icon appears | Current temperature (PV) has exceeded the set high alarm (HA) or fallen below the low alarm (LA) threshold. | Check the environmental conditions. Adjust HA/LA settings if necessary. The controller will disable all outputs in fault alarm mode to protect equipment. |
| Heating/Cooling device not activating | Incorrect temperature settings (TS, CD, HD); compressor delay protection (PT) active; device not properly plugged in; device malfunction. | Verify TS, CD, and HD settings. Wait for the PT delay to expire in cooling mode. Ensure devices are securely plugged into the correct outlets. Test heating/cooling devices independently. |
| Ungenaue Temperaturanzeige | Sensor placement; temperature calibration (CA) offset. | Relocate the sensor to a more representative area. Use the CA parameter to calibrate the reading against a known accurate thermometer. |
7. Spezifikationen
| Besonderheit | Detail |
|---|---|
| Modellnummer | XT-STC1000Pro-01US |
| Marke | Xetron |
| Bandtage | 230V AC (Note: Product description mentions 230V, specifications mention 110V. User should verify their specific model's voltage Anforderungen.) |
| Max Ausgangsstrom | 10A pro Steckdose |
| Temperaturregelbereich | -40 ℃ bis 110 ℃ (-40 ℉ bis 230 ℉) |
| Temperaturgenauigkeit | ±1 ℃ / ±2 ℉ |
| Anzeigetyp | OLED |
| Material | Flame-retardant ABS Plastic |
| Produktabmessungen (L x B x H) | 20 x 15 x 6 cm |
| Gewicht | 400 Gramm |
| Betriebstemperatur | Bis zu 110 °C |
| Im Lieferumfang enthaltene Komponenten | 1x Temperature Controller |
8. Sicherheitshinweise und Vorsichtsmaßnahmen
- Elektrische Last: Do not connect equipment with a total power consumption exceeding 10A (2400W at 240V) to each outlet. Overloading can cause damage to the controller and connected devices, and poses a fire hazard.
- Bandtage Kompatibilität: Stellen Sie sicher, dass die Lautstärke des Controllerstage (230V) matches your local power supply.
- Wassereinwirkung: While the probe is waterproof, the main controller unit is not designed for immersion. Avoid exposing the main unit to direct water spray or submersion.
- Sensorintegrität: Always ensure the temperature sensor is fully and securely inserted. A short-circuited or damaged sensor will trigger a fault alarm and disable outputs for protection.
- Kinder und Haustiere: Keep the device and its cables out of reach of children and pets to prevent accidental damage or injury.
- Belüftung: Sorgen Sie für ausreichende Belüftung rund um den Controller, um eine Überhitzung zu vermeiden.
9. Support und Kontaktinformationen
For any questions, technical assistance, or customer service inquiries regarding your Xetron STC-1000Pro Digital Temperature Controller, please contact Xetron customer support. We are committed to providing satisfactory customer service.
Bitte beachten Sie die Produktverpackung oder die Angaben des Händlers. webDie aktuellsten Kontaktdaten finden Sie auf der Website.
