1. Einleitung
The Minoston 800 Series Z-Wave Plug Dimmer Smart Plug-in Outlet (MP31ZD) is designed to provide intelligent control over your lighting. This device integrates into your Z-Wave network, allowing for remote dimming, scheduling, and voice control of connected lamps or dimmable LED lights. It features the Z-Wave 800 series chip for enhanced signal coverage and faster communication, along with S2 authenticated security and SmartStart for simplified pairing.
Image 1.1: Minoston MP31ZD Z-Wave Dimmer Plug and its packaging.
2. Sicherheitshinweise
Please read and understand all safety precautions before installation and use. Failure to follow these instructions may result in fire, electrical shock, or injury.
- Nur zur Verwendung im Innenbereich: This device is intended for indoor use in dry locations. Do not expose to rain, moisture, or extreme temperatures.
- Elektrische Wertung: Do not exceed the maximum electrical ratings of 200W Incandescent or 100W Dimmable CFL/LED. Overloading may cause overheating and potential damage.
- Energiequelle: Connect to a 125V AC power source only.
- Wartung: Do not attempt to repair or modify this device. Refer all servicing to qualified personnel.
- Reinigung: Vor der Reinigung die Stromzufuhr unterbrechen. Nur ein trockenes Tuch verwenden.
3. Packungsinhalt
Prüfen Sie beim Öffnen der Verpackung, ob alle Komponenten vorhanden sind:
- 1 x Minoston Z-Wave Dimmer Plug (MP31ZD)
- 1 x Bedienungsanleitung (evtl. nicht in deutscher Sprache).
4. Produktüberschreitungview
The Minoston MP31ZD is a compact Z-Wave dimmer plug designed for ease of use and integration into smart home systems. Its small form factor allows for two units to be plugged into a standard duplex outlet without obstructing the second receptacle.
Image 4.1: Key components and dimensions of the Minoston MP31ZD.
Hauptmerkmale:
- Z-Wave 800 Series: Utilizes the latest Z-Wave 800 series chip for improved signal range (up to 1300ft with Long Range support) and faster communication.
- S2 Authenticated Security: Enhances network security for reliable operation.
- Smart Start: Simplifies the pairing process with compatible Z-Wave hubs.
- 1-100% Dimming: Allows precise control over light brightness for various dimmable light bulbs (incandescent, dimmable CFL/LED).
- Built-in Repeater: Extends the Z-Wave network range by repeating signals.
- Kompaktes Design: Mini size prevents blocking adjacent outlets.
- Sprachsteuerung: Compatible with Amazon Alexa and Google Assistant when connected to a supported Z-Wave hub.
- Terminplanung & Timer: Program lights to turn on/off or dim at specific times.
Bild 4.2: Überview of the Z-Wave 800 Series features.
5. Einrichtung und Installation
No wiring is required for the Minoston MP31ZD. Simply plug it into a standard wall outlet and connect it to your Z-Wave hub.
5.1 Pairing with a Z-Wave Hub
The MP31ZD supports SmartStart for easy pairing and can also be added manually.
Image 5.1: Setup methods for the Minoston MP31ZD with a Z-Wave hub.
Method 1: SmartStart (Recommended)
- Ensure your Z-Wave hub supports SmartStart.
- Open your Z-Wave hub's mobile application and select the option to add a new device or scan a QR code.
- Scan the QR code located on the Minoston MP31ZD device or its packaging.
- The device should automatically pair with your hub. Follow any on-screen prompts in your hub's application.
Method 2: Manual Inclusion
- Plug the Minoston MP31ZD into a wall outlet.
- Put your Z-Wave hub into inclusion (pairing) mode. Refer to your hub's manual for specific instructions.
- Quickly press the program button on the side of the MP31ZD three (3) times.
- The LED indicator on the plug will flash to confirm inclusion mode.
- If prompted by your hub, enter the Device Specific Key (DSK) or PIN code found on the device or packaging.
- The hub will confirm successful pairing.
Notiz: This Z-Wave dimmer plug is compatible with Z-Wave hubs such as SmartThings, Vera, Wink, Fibaro, Homeseer, Ring, 2GIG, and Hubitat (may require changing device type). It requires a Z-Wave certified hub for compatibility with Amazon Alexa and Google Assistant. It kann nicht connect directly with Echo Plus.
6. Bedienungsanleitung
Once paired with your Z-Wave hub, the Minoston MP31ZD offers various control options.
6.1 Manuelle Steuerung
The program button on the side of the device can be used for basic on/off control. A single press will toggle the connected light between on and off states.
6.2 Remote Control and Dimming
Use your Z-Wave hub's mobile application to control the connected light. You can turn it on/off and adjust the brightness from 1% to 100%.
Image 6.1: Adjusting light brightness via a mobile application.
Image 6.2: Remote control functionality from any location.
6.3 Sprachsteuerung
If your Z-Wave hub is integrated with Amazon Alexa or Google Assistant, you can control the dimmer plug using voice commands.
- Example-Befehle:
- "Alexa, turn the lights down to 70%."
- "Hey Google, set the light to the darkest setting."
Image 6.3: Voice control integration with smart assistants.
6.4 Zeitplanung und Timer
Set up custom schedules and timers through your Z-Wave hub's application to automate your lighting.
- Example: Schedule lights to turn on at 6:00 PM and turn off at 11:00 PM.
Image 6.4: Setting schedules and timers for automated lighting.
7. Wartung
The Minoston MP31ZD requires minimal maintenance.
- Reinigung: Ensure the device is unplugged before cleaning. Use a soft, dry cloth to wipe the exterior. Do not use liquid cleaners or sprays.
- Lagerung: If storing the device for an extended period, keep it in a cool, dry place away from direct sunlight and moisture.
- Firmware-Updates: Periodically check your Z-Wave hub's application for any available firmware updates for the device, as these can improve performance and add features.
8. Fehlerbehebung
If you encounter issues with your Minoston MP31ZD, refer to the following common troubleshooting steps:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Device does not pair with Z-Wave hub. | Hub nicht im Einbindungsmodus; Gerät zu weit vom Hub entfernt; Störungen. | Ensure hub is in inclusion mode. Move device closer to hub. Try excluding the device first (see hub manual), then re-include. |
| Das Licht wird nicht dunkler und flackert nicht. | Non-dimmable bulb; bulb incompatibility; load too low/high. | Ensure the connected bulb is dimmable. Check bulb compatibility with Z-Wave dimmers. Verify load is within 200W Incandescent / 100W Dimmable CFL/LED. |
| Sprachsteuerung funktioniert nicht. | Hub not linked to voice assistant; incorrect device name; hub not supported. | Confirm your Z-Wave hub is properly linked to Amazon Alexa or Google Assistant. Check the device name in your voice assistant app. Ensure your hub supports voice assistant integration. |
| Device loses connection. | Z-Wave network issues; device too far from hub/repeater. | Check Z-Wave network health. Ensure there are enough Z-Wave repeaters (like other Z-Wave devices) between the plug and the hub. |
9. Spezifikationen
| Spezifikation | Detail |
|---|---|
| Modellnummer | MP31ZD |
| Z-Wellen-Frequenz | 908.42 MHz |
| Betriebslautstärketage | 125 Volt (Wechselstrom) |
| Maximale Belastung (Glühlampe) | 200 W |
| Max Load (Dimmable CFL/LED) | 100 W |
| Produktabmessungen (L x B x H) | 2.52 x 1.18 x 1.46 Zoll |
| Artikelgewicht | 2.08 Unzen |
| Betriebsmodus | EIN-AUS-EIN |
| Kontakttyp | Normalerweise geschlossen |
| Steckertyp | Einstecken |
| Terminal | Klinge |
| Schaltungsart | 1-Wege |
| Antriebstyp | Einstecken |
| Kontaktmaterial | Kupfer |
| Zertifizierungen | FCC & ETL listed |
10. Garantie und Support
Minoston products are designed for reliability and performance. For warranty information or technical support, please refer to the contact details provided with your purchase or visit the official Minoston webWebsite. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
