1. Einleitung
The EBYTE E22-230T22D is a new generation LoRa wireless module designed for robust and long-range communication. It functions as a wireless serial port module (UART) utilizing an RF chip, offering multiple transmission modes.
This module operates within the 220.125~236.125MHz frequency band (default 230.125MHz) and employs LoRa spread spectrum technology for enhanced performance. It provides TTL level output and is compatible with both 3.3V and 5V IO port voltages.
An image showing the EBYTE E22-230T22D LoRa wireless module, a green circuit board with an integrated SMA-K RF interface connector on the right side. The module is labeled 'E22 230T22D EBYTE' and includes a QR code. For more information, visit the official webWebsite: http://www.cdebyte.com/
2. Hauptmerkmale
- LoRa Spread Spectrum Technologie: Ensures stable communication and anti-interference capabilities.
- Automatic Relay Networking: Supports multi-level relay for ultra-long-distance communication, allowing multiple networks to operate simultaneously in the same area.
- Over-the-Air Wake-up (WOR): Enables ultra-low power consumption, ideal for battery-powered applications.
- Multiple Transmission Modes: Anpassbar an verschiedene Kommunikationsbedürfnisse.
- TTL Level Output: Compatible with 3.3V and 5V IO port voltages.
- Praktische Funktionen: Includes fixed-point transmission, broadcast monitoring, forward error correction (FEC), watchdog, deep dormancy, Wake On Radio, parameter save, and variable packet length.
A diagram titled 'E22 has more practical functions' showing icons and labels for Fixed-point transmission, Broadcast monitoring, Forward error correction, Watchdog, Deep dormancy, Wake On Radio, Parameter save, and Variable packet length.
A diagram showing two E22 modules communicating, with lines indicating signal paths. It highlights how LoRa spread spectrum technology helps overcome interference and obstacles for stable, long-distance communication.
3. Technische Daten
| Parameter | Wert |
|---|---|
| Modell | E22-230T22D |
| Frequenz | 220.125~236.125MHz (Default: 230.125MHz) |
| Leistung | 22dBm |
| Distanz | Bis zu 5km |
| Schnittstelle | SMA-K RF Interface |
| Ausgangspegel | TTL |
| IO Voltage Kompatibilität | 3.3 V und 5 V |
| Maße | 36mm x 21mm |
An image of the EBYTE E22-230T22D module with dimensions indicated: 36mm in length and 21mm in width. For more information, visit the official webWebsite: http://www.cdebyte.com/
4. Installationsanleitung
This section provides general guidance for setting up your E22-230T22D module. For detailed pinout and connection diagrams, please refer to the official product datasheet available on the manufacturer's webWebsite.
4.1 Grundlegende Verbindung
Connect the module to your microcontroller or development board using the UART interface. Ensure correct voltage levels (3.3V or 5V) for the IO pins.
4.2 Antennenanschluss
Attach a compatible 230MHz antenna to the SMA-K RF interface. Ensure the antenna is securely fastened for optimal performance.
4.3 Netzteil
Provide a stable power supply within the module's specified voltage range. Refer to the datasheet for exact power requirements.
5. Bedienungsanleitung
The E22-230T22D module operates via AT commands or through a dedicated configuration tool, depending on the firmware version.
5.1 Datenübertragung
Once configured, data can be sent and received through the UART interface. The module handles the LoRa modulation and demodulation automatically.
5.2 Modusauswahl
The module supports various operating modes, including transparent transmission, fixed-point transmission, and broadcast. Select the appropriate mode based on your application requirements.
5.3 Wake On Radio (WOR)
To utilize the ultra-low power Wake On Radio feature, configure the module accordingly. This allows the module to enter a deep sleep state and wake up upon receiving a specific signal.
6. Wartung
- Halten Sie das Modul sauber und frei von Staub und Feuchtigkeit.
- Vermeiden Sie, das Modul extremen Temperaturen oder direkter Sonneneinstrahlung auszusetzen.
- Sorgen Sie für ausreichende Belüftung, wenn das Modul in einem geschlossenen Gehäuse untergebracht ist.
- Regularly check antenna connections for secure fit.
7. Fehlerbehebung
7.1 Keine Kommunikation
- Überprüfen Sie die Stromversorgung voltage und Verbindungen.
- Check UART wiring (TX/RX cross-connection).
- Confirm baud rate and other serial port settings match the module's configuration.
- Ensure the module is in the correct operating mode.
7.2 Poor Range/Signal
- Check antenna type and connection. Ensure it is suitable for 230MHz.
- Verify line-of-sight between modules. Obstacles can significantly reduce range.
- Prüfen Sie auf lokale Störquellen.
- Ensure transmit power settings are appropriate.
8. Anwendungsszenarien
The E22-230T22D module is versatile and suitable for a wide range of applications, including:
- Home security alarms and remote keyless entry systems.
- Smart home and industrial sensor networks.
- Wireless alarm security systems.
- Building automation solutions.
- Wireless industrial-grade remote controls.
- Gesundheitsprodukte.
- Erweiterte Zählerablesearchitektur (AMI).
- Anwendungen in der Automobilindustrie.
A collage of four images depicting various application scenarios: industrial manufacturing with machinery, a smart home thermostat, a smart farm with a drone spraying crops, and a hotel room door lock, illustrating the module's diverse uses.
9. Herstellerinformationen
Hersteller: Chengdu Ebyte Electronic Technology Co., Ltd.
Address: 2F, Building B2, No. 199, West District Avenue, High-tech Zone, Sichuan Cheng Du, China.
A label from the product packaging showing manufacturer details for Chengdu Ebyte Electronic Technology Co., Ltd. in China, and EU REP information for evalMaster Consulting GmbH in Germany.
10. Garantie und Support
For warranty information and technical support, please refer to the official EBYTE webBesuchen Sie unsere Website oder wenden Sie sich an Ihren lokalen Händler.
Offiziell WebWebsite: http://www.cdebyte.com/
