Produkt überview
The Brink 738614 Electric Towbar Wiring Kit is designed to provide the necessary electrical connections for a trailer or caravan when a towbar is installed on your vehicle. This kit features a 13-pole electrical socket and includes an electronic control system for seamless integration with modern vehicle electronics. Key functionalities include automatic deactivation of the rear fog light and parking assistance when a trailer is connected, as well as support for a trailer stability program.
Sicherheitshinweise
Important: Installation of this electrical kit should only be performed by qualified personnel or a professional workshop. Incorrect installation can lead to vehicle damage or electrical malfunction.
- Vor Beginn jeglicher elektrischer Arbeiten muss immer die Fahrzeugbatterie abgeklemmt werden.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind, um Kurzschlüsse zu vermeiden.
- Refer to your vehicle's specific wiring diagrams and owner's manual for additional guidance.
- Do not modify the wiring harness or control unit.
Packungsinhalt
Bitte vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- Main wiring harness with vehicle-specific connectors
- Elektronische Steuereinheit
- 13-pole electrical socket
- Mounting hardware (screws, cable ties, etc.)
- Installation instructions (refer to this manual for general guidance)
Setup und Installation
This electrical kit is designed for vehicles with a CAN-Bus system. Professional installation is highly recommended due to the complexity of modern vehicle electronics.
Prüfungen vor der Installation
- Confirm vehicle compatibility using the provided compatibility list.
- Ensure the vehicle's battery is disconnected before starting any work.
- Gather all necessary tools for electrical work and trim removal.
Allgemeine Installationsschritte
- Access the vehicle's rear wiring area, typically behind the trim panels in the trunk or cargo space.
- Mount the electronic control unit in a secure, dry location, away from excessive heat or vibration.
- Connect the main wiring harness to the vehicle's existing wiring, utilizing the original plug-in connectors where applicable. This often involves connecting to the CAN-Bus system.
- Route the cable for the 13-pole socket to the exterior of the vehicle, near the towbar mounting point.
- Securely attach the 13-pole electrical socket to the towbar or a suitable mounting bracket.
- Connect the socket to the routed wiring harness.
- Reconnect the vehicle's battery and perform initial system checks.
- Test all trailer lighting and electrical functions with a suitable trailer or test board.
Image: A 13-pole electrical socket, typically used for connecting a trailer's electrical system to the vehicle. It features multiple pins for various lighting and auxiliary functions.
Bedienungsanleitung
Once correctly installed, the Brink 738614 electrical kit operates automatically when a trailer is connected to the 13-pole socket.
- Trailer Stability Program: The electronic control system integrates with the vehicle's stability control to enhance safety when towing, helping to mitigate trailer sway.
- Rear Fog Light Deactivation: When a trailer is connected, the vehicle's rear fog light will automatically deactivate to prevent glare from reflecting off the trailer. The trailer's fog light will function if equipped.
- Parking Assistance Deactivation: The vehicle's rear parking sensors will automatically deactivate when a trailer is connected to prevent false alarms.
- Charging Cable Extension: Note that the standard cable trunk does not include a permanent positive feed. An extension cable kit may be required for charging auxiliary batteries on the trailer or caravan.
Wartung
Regular maintenance ensures reliable operation of your electrical towbar kit.
- Verbindungen prüfen: Periodically check the 13-pole socket and all visible wiring for signs of corrosion, damage, or loose connections.
- Steckdose reinigen: Keep the 13-pole socket clean and free of dirt, moisture, and debris. Use a non-conductive contact cleaner if necessary.
- Kabelintegrität: Ensure that all cables are securely fastened and not chafing against sharp edges or moving parts.
Fehlerbehebung
If you encounter issues with your electrical towbar kit, refer to the table below for common problems and solutions. For complex issues, consult a professional.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Die Anhängerbeleuchtung funktioniert nicht. | Loose connection at socket or vehicle; Blown fuse; Faulty trailer wiring | Check all connections; Inspect vehicle and trailer fuses; Test trailer wiring independently |
| Bestimmte Anhängerleuchte funktioniert nicht | Faulty bulb on trailer; Corroded pin in socket; Wiring issue for that specific light | Replace bulb; Clean socket pins; Check wiring for that specific circuit |
| Parking sensors not deactivating | Trailer not fully connected; Control unit malfunction; Wiring issue | Ensure secure connection; Consult professional for diagnosis |
| Error message on vehicle dashboard | CAN-Bus communication error; Incorrect installation; Control unit fault | Verify installation steps; Consult professional for diagnostic scan |
Technische Daten
- Sockeltyp: 13-polig
- Kontrollsystem: Electronic control unit with original plug-in connectors
- Merkmale: Rear fog light deactivation, parking assistance deactivation, trailer stability program support
- Fahrzeugkompatibilität: Designed for vehicles with CAN-Bus system
- Stromversorgung: Cable trunk does not include permanent positive feed (extensible for charging cable)
- Required Supplementary Article: 764159 (falls zutreffend)
Fahrzeugkompatibilität
This electrical kit is compatible with the following vehicle models. Please ensure to verify compatibility with your specific vehicle's year and trim level.
- PEUGEOT 3008 SUV (M)
- CITROËN C5 Aircross
- PEUGEOT 5008 II
- OPEL GRANDLAND X (A18)
For detailed compatibility with specific engine types and years, please refer to the product's official compatibility checker or consult your vehicle manufacturer.
Garantie und Support
Brink products are manufactured to high standards. For warranty information, please refer to the documentation provided with your purchase or visit the official Brink website. For technical support or assistance with installation, please contact Brink customer service or your authorized dealer.
