1. Einleitung
Vielen Dank für Ihren Einkauf.asing the Edifier R19BT 2.0 USB Powered Bluetooth Computer Speaker System. This manual provides detailed instructions for setup, operation, and maintenance to ensure optimal performance and longevity of your speakers. Please read this manual thoroughly before use and retain it for future reference.
2. Packungsinhalt
Bitte überprüfen Sie den Inhalt der Box, um sicherzustellen, dass alle Artikel vorhanden sind:
- Edifier R19BT Speakers (Right and Left)
- Bedienungsanleitung
- 3.5-mm-Audiokabel
3. Produktüberschreitungview
The Edifier R19BT system consists of two speakers. The right speaker houses the main controls and connections.
Bild: Vorderseite view of the Edifier R19BT speakers, showing the volume/power knob, headphone jack, and input selector button on the right speaker.
Right Speaker Controls and Ports:
- Lautstärke-/Ein-/Ausschalter: Zum Einstellen der Lautstärke drehen. Zum Ein-/Ausschalten gedrückt halten.
- Kopfhöreranschluss: 3.5-mm-Ausgang für Kopfhörer.
- Eingangswahlschalter: Press to cycle through USB, AUX, and Bluetooth input modes.
- Betriebsanzeige: LED light indicating power status and current input mode.
Rear Panel Connections (Right Speaker):
- USB-A-Kabel: Permanently attached for power and USB audio input.
- 3.5-mm-AUX-Eingang: Zum Anschluss externer Audiogeräte über ein 3.5-mm-Audiokabel.
- Lautsprecherausgang: Wird an den linken Lautsprecher angeschlossen.
4. Einrichtung
Follow these steps for initial setup of your Edifier R19BT speakers:
- Positionierung: Place the right speaker on the right side of your listening area and the left speaker on the left side. Ensure they are on a stable, flat surface.
- Lautsprecher anschließen: Connect the cable from the right speaker's output to the input on the left speaker.
- Stromanschluss: Plug the attached USB-A cable from the right speaker into a USB port on your computer, laptop, or a compatible USB power adapter (5V/1A minimum, not included).
- Einschalten: Press and hold the Volume/Power knob on the right speaker for approximately 2 seconds to power on the system. The power indicator LED will light up.
Image: A close-up of the USB cable connecting the speaker to a laptop, illustrating the plug-and-play USB power and audio feature.
5. Bedienungsanleitung
Ein-/Ausschalten:
- To power on, press and hold the Volume/Power knob for 2 seconds.
- To power off, press and hold the Volume/Power knob for 2 seconds.
Lautstärkeregelung:
- Rotate the Volume/Power knob clockwise to increase volume.
- Rotate the Volume/Power knob counter-clockwise to decrease volume.
Eingangsauswahl:
Press the Input Selector button on the right speaker to cycle through the available input modes:
- USB-Modus: For audio playback from a computer via USB.
- AUX-Modus: For audio playback from devices connected via the 3.5mm AUX input.
- Bluetooth-Modus: For wireless audio playback from Bluetooth-enabled devices.
Verwendung von Kopfhörern:
Plug your headphones into the 3.5mm headphone jack on the right speaker. The speaker output will automatically mute when headphones are connected.
Image: The right Edifier R19BT speaker highlighting the large 25mm knob for power on/off and volume control.
6. Bluetooth-Verbindung
The Edifier R19BT speakers feature Bluetooth 5.3 for wireless audio streaming.
Image: The Edifier R19BT speakers with text indicating Bluetooth 5.3 for fast connection and stable transmission.
- Bluetooth-Modus auswählen: Press the Input Selector button on the right speaker until the power indicator LED shows the Bluetooth mode (usually a blue light). The speaker will enter pairing mode, and the LED will flash rapidly.
- Aktivieren Sie Bluetooth auf Ihrem Gerät: Gehen Sie auf Ihrem Smartphone, Tablet oder einem anderen Bluetooth-fähigen Gerät zu den Bluetooth-Einstellungen und aktivieren Sie Bluetooth.
- Paarung: In the list of available devices, select "EDIFIER R19BT". Once connected, the power indicator LED on the speaker will glow steadily.
- Wiedergabe: You can now play audio wirelessly from your device through the speakers.
Notiz: If prompted for a password, enter "0000". The speakers will automatically attempt to reconnect to the last paired device when powered on and in Bluetooth mode.
Image: A stylized diagram of a microchip labeled 'Bluetooth 5.3', representing the advanced wireless technology integrated into the speakers.
7. Wired Connection (USB/Aux)
USB-Audioeingang:
The R19BT speakers can function as a USB sound card for your computer.
- USB anschließen: Ensure the attached USB-A cable from the right speaker is connected to a USB port on your computer (PC or Mac).
- USB-Modus auswählen: Press the Input Selector button on the right speaker until the power indicator LED shows the USB mode (usually a white light).
- Als Ausgabegerät auswählen: On your computer, select "Edifier R19BT" as the audio output device in your sound settings.
Image: A close-up of a USB cable being plugged into a laptop, demonstrating the direct USB audio and power connection.
3.5-mm-AUX-Eingang:
Connect external audio sources like MP3 players, smartphones, or other devices using the 3.5mm AUX input.
- AUX-Kabel anschließen: Connect one end of the included 3.5mm audio cable to the AUX input port on the rear of the right speaker. Connect the other end to the audio output jack of your external device.
- AUX-Modus auswählen: Press the Input Selector button on the right speaker until the power indicator LED shows the AUX mode (usually a green light).
- Wiedergabe: Spiele Audio von deinem angeschlossenen Gerät ab.
8. Wartung
Proper maintenance ensures the longevity and performance of your speakers:
- Reinigung: Reinigen Sie die Lautsprecheroberflächen mit einem weichen, trockenen Tuch. Verwenden Sie keine flüssigen Reinigungsmittel oder Scheuermittel.
- Umfeld: Avoid exposing the speakers to direct sunlight, high humidity, dust, or extreme temperatures.
- Belüftung: Ensure adequate airflow around the speakers to prevent overheating.
- Handhabung: Behandeln Sie die Lautsprecher mit Sorgfalt. Vermeiden Sie es, sie fallen zu lassen oder starken Stößen auszusetzen.
9. Fehlerbehebung
If you encounter issues with your Edifier R19BT speakers, please refer to the following troubleshooting guide:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein Ton |
|
|
| Die Bluetooth-Verbindung schlägt fehl |
|
|
| Verzerrter Ton |
|
|
| Speakers not recognized by computer via USB |
|
|
10. Spezifikationen
Technical specifications for the Edifier R19BT speakers:
Image: A graphic displaying key specifications of the Edifier R19BT speakers, including distortion limit, frequency response, noise level, and input voltage.
- Modellname: R19BT
- Lautsprechertyp: Bücherregal
- Konnektivitätstechnologie: Aux-Anschluss, Bluetooth 5.3, USB
- Audioausgabemodus: Stereoanlage (2.0)
- Maximale Ausgangsleistung des Lautsprechers: 6 Watts (2W+2W distortion limit output power)
- Frequenzgang: 80Hz - 19KHz
- Signal-Rausch-Verhältnis: ≥25 dB(A)
- Eingangslautstärketage: 5 Volts (5V⎓1A)
- Treibergröße: 2.75 Inches (Full-range unit)
- Produktabmessungen: 5.12"T x 3.35"B x 6.88"H
- Artikelgewicht: 2.98 Pfund
- Material: Plastic (with MDF wood case)
- Farbe: Schwarz
11. Garantie und Support
The Edifier R19BT speakers come with a limited warranty. For detailed warranty terms and conditions, please refer to the warranty card included in your package or visit the official Edifier webWebsite.
For technical support, troubleshooting assistance, or service inquiries, please contact Edifier customer support through their official channels. You can typically find contact information on the Edifier webWebsite oder in der Produktverpackung.
Hersteller: Erbauer
WebWebsite: www.edifier.com
