1. Sicherheitshinweise
Read all instructions thoroughly before installation and operation. Failure to follow these instructions may result in property damage, personal injury, or death. This appliance must be installed by a qualified electrician and plumber in accordance with all national and local electrical and plumbing codes.
- Elektrische Gefahr: Ensure power is disconnected at the circuit breaker before performing any installation or maintenance.
- Wasserdruck: Do not operate the unit if water pressure is below the minimum required.
- Temperatureinstellungen: Be aware of potential scalding hazards if the temperature is set too high.
- Erdung: Dieses Gerät muss ordnungsgemäß geerdet sein.
2. Produktüberschreitungview
The ANZZI Envo Electric Tankless Water Heater provides on-demand hot water without the need for a storage tank. Its compact design allows for installation in various locations, saving space and reducing standby heat loss. This unit is designed for continuous hot water supply to multiple fixtures.
Hauptmerkmale:
- Heats water only when needed, eliminating standby heat loss.
- Compact design for installation in tight spaces.
- Supplies hot water to kitchen faucets, bathroom faucets, and showers.
- Features an LED display and overheat protection.
Abbildung 1: Front view of the ANZZI Envo Electric Tankless Water Heater, showcasing its green casing und digitale Temperaturanzeige.
3. Spezifikationen
| Attribut | Wert |
|---|---|
| Marke | ANZZI |
| Modellnummer | WH-AZ024-M3 |
| Wastage | 24000 Watt (24 kW) |
| Bandtage | 240 Volt |
| Wärmeabgabe | 24000 Watt |
| Effizienz | Hohe Effizienz |
| Montagetyp | Wand |
| Technische Daten | 3.54 x 10.24 x 15.16 Zoll |
| Artikelgewicht | 16.87 Pfund |
| Besondere Merkmale | LED Display, Overheat Protection |
| Zertifizierung | ETL |
4. Installation
Professional installation is recommended for this appliance. Consult a licensed electrician and plumber prior to purchase and installation to ensure compliance with all local codes and proper sizing for your household needs.
4.1 Elektrische Anforderungen
The ANZZI Envo 24 kW unit requires significant electrical capacity. Ensure your breaker panel can accommodate the following:
- Maximale Ziehung: 100 Amps
- Erforderlicher Leistungsschalter: 3 x 40 AMP Double Pole Breakers
- Required Wire: 3x8 AWG
- Minimum Panel Capacity: 200 Amps or more recommended.
Abbildung 2: Electrical requirements diagram for the ANZZI Envo 24 kW tankless water heater, detailing breaker and wire specifications.
4.2 Unit Capacity and Sizing
The performance of your tankless water heater depends on the incoming water temperature and the desired flow rate. Refer to the chart below to determine the appropriate unit capacity for your local climate and usage needs.
Abbildung 3: A map illustrating general temperature areas across the US, alongside a chart detailing GPM (Gallons Per Minute) usage for various fixtures at different inlet water temperatures, assuming an outlet temperature of 105°F.
4.3 Überlegungen zur Platzierung
The compact design of the ANZZI Envo allows for flexible installation. It can be installed in various locations such as under sinks, in utility closets, or garages, provided electrical and plumbing requirements are met.
Abbildung 4: Example installation of the ANZZI Envo tankless water heater within a bathroom cabinet, demonstrating its space-saving design.
Abbildung 5: An illustration showing the ANZZI Envo tankless water heater installed in a garage, providing hot water to multiple points of use in an adjacent kitchen and an upstairs bathroom.
Abbildung 6: Detailed dimensions of the ANZZI Envo tankless water heater, measuring approximately 10.2 inches wide by 15.1 inches high.
5. Bedienungsanleitung
The ANZZI Envo tankless water heater is designed for user-friendly operation. Once installed and powered, the unit will display the current water temperature.
5.1 Temperatureinstellung
- Use the up and down arrow buttons on the front panel to adjust the desired water temperature.
- The LED display will show the set temperature.
- Das Gerät erhitzt das Wasser automatisch auf die eingestellte Temperatur, sobald ein Durchfluss erkannt wird.
Abbildung 7: Internal diagram illustrating the flow of cold water into the heating element and the output of continuous hot water, highlighting the instant heating process.
5.2 Hot Water Delivery
The unit provides instant and continuous hot water on demand. Open any hot water faucet to activate the heater. The unit will begin heating water as it flows through.
Abbildung 8: A shower head delivering hot water, demonstrating the instant hot water on demand feature of the ANZZI Envo tankless water heater.
Video 1: An official ANZZI video demonstrating the installation and operation of the Envo Tankless Electric Water Heater, highlighting its compact size, instant hot water delivery to faucets and showers, and patented heating technology.
6. Wartung
Regular maintenance ensures optimal performance and longevity of your ANZZI Envo tankless water heater.
- Jährliche Inspektion: Have a qualified technician inspect the unit annually for any signs of wear or damage.
- Reinigung: Reinigen Sie die Außenseite des Geräts regelmäßig mit einem weichen, feuchten Tuch.amp Tuch. Keine Scheuermittel verwenden.
- Sedimentfilter: If your water supply has high sediment, consider installing an external sediment filter and clean it regularly according to the filter manufacturer's instructions.
- Entkalkung: In areas with hard water, mineral buildup can affect performance. Consult a professional for descaling procedures if necessary.
Abbildung 9: A visual comparison demonstrating that the ANZZI Envo tankless water heater occupies over 90% less volume than a standard tank water heater.
7. Fehlerbehebung
If you experience issues with your ANZZI Envo tankless water heater, refer to the following common problems and solutions. For persistent issues, contact customer support.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Kein heißes Wasser | No power, low water flow, unit malfunction | Check circuit breaker. Ensure adequate water flow. Contact support if power and flow are normal. |
| Wasser nicht heiß genug | Temperature set too low, high flow rate, cold inlet water | Increase set temperature. Reduce water flow at faucet. Refer to capacity chart (Figure 3). |
| Einheit leckt | Loose connections, damaged components | Turn off water supply and power. Inspect connections for tightness. Contact a plumber or support. |
| Fehlercode auf dem Display | Interner Fehler | Note the error code and contact ANZZI customer support for assistance. |
8. Garantie und Support
For warranty information, please refer to the documentation included with your purchase or visit the official ANZZI website. If you require technical assistance, replacement parts, or have questions regarding your ANZZI Envo Electric Tankless Water Heater, please contact ANZZI customer support.
ANZZI Customer Service: Refer to your product packaging or the ANZZI webDie aktuellsten Kontaktinformationen finden Sie auf dieser Webseite.
