EGLO G9 LED Pin Bulb (Model 110152) Instruction Manual

Einführung

This manual provides essential information for the safe and efficient use of your EGLO G9 LED Pin Bulbs. Please read these instructions carefully before installation and retain them for future reference. These LED bulbs are designed to replace traditional 20W halogen bulbs, offering energy efficiency and a warm white light.

Sicherheitshinweise

• Always switch off the power supply before installing, removing, or cleaning the bulb.
• Ensure the bulb is cool before handling to prevent burns.
• Do not use in fully enclosed luminaires without adequate ventilation, as this may shorten bulb lifespan.
• Diese Glühbirne ist nur für den Innenbereich bestimmt.
• Die Glühbirne darf nicht auseinandergenommen oder verändert werden.
• Entsorgen Sie gebrauchte Glühbirnen gemäß den örtlichen Vorschriften.

Packungsinhalt

• 2 x EGLO G9 LED Pin Bulbs (Model 110152)

Aufstellen

1. Strom ausschalten: Before attempting any installation, ensure the power supply to the light fixture is completely switched off at the main circuit breaker.
2. Alte Glühbirne entfernen: Carefully remove the existing G9 halogen bulb from the fixture. Allow it to cool if it has been recently in use.
3. Neue LED-Lampe einsetzen: Align the two pins of the EGLO G9 LED bulb with the corresponding holes in the G9 socket. Gently push the bulb straight into the socket until it is securely seated. Do not force the bulb.
4. Strom wiederherstellen: Once the bulb is securely installed, restore power to the light fixture at the main circuit breaker.
5. Prüfen: Schalten Sie den Lichtschalter ein, um die ordnungsgemäße Funktion zu überprüfen.

Bedienungsanleitung

• Ein-/Ausschalten: Operate the bulb using your standard light switch. The LED bulb will illuminate instantly without any warm-up time.
• Dimmbare Funktion: This EGLO G9 LED bulb is dimmable. If your light fixture is connected to a compatible dimmer switch, you can adjust the light intensity. Ensure your dimmer switch is suitable for LED bulbs to avoid flickering or damage.
• Lichtqualität: The bulb emits a warm white light at 3000 Kelvin, ideal for creating a comfortable and relaxing ambiance in living rooms and bedrooms.

Wartung

• Reinigung: Vor der Reinigung sicherstellen, dass die Stromzufuhr unterbrochen und die Glühbirne abgekühlt ist. Die Glühbirne vorsichtig mit einem weichen, trockenen Tuch abwischen. Keine flüssigen Reiniger oder Scheuermittel verwenden.
• Ersatz: With a lifespan of 15,000 hours, frequent replacement is not expected. When replacement is necessary, follow the 'Setup' instructions in reverse order to remove the old bulb and install a new one.

Fehlerbehebung

• Glühbirne leuchtet nicht:
  • Prüfen Sie, ob die Stromversorgung der Leuchte eingeschaltet ist.
  • Stellen Sie sicher, dass die Glühbirne richtig in der Fassung sitzt.
  • Test the bulb in another working fixture, if possible, to rule out a faulty bulb.
• Flackern:
  • If using a dimmer, ensure it is compatible with LED bulbs. Incompatible dimmers can cause flickering or damage.
  • Prüfen Sie, ob die Verbindungen in der Leuchte oder der Verkabelung locker sind.
• Gedimmte Lichtleistung:
  • Verify that the dimmer (if used) is set to maximum brightness.
  • Ensure the bulb's specifications match your lighting needs.

Technische Daten

Garantieinformationen

EGLO products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the documentation provided with your purchase or visit the official EGLO webBitte bewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.

Support-Informationen

For technical assistance, troubleshooting beyond this manual, or product inquiries, please contact EGLO customer support. Contact details can typically be found on the product packaging or the official EGLO webSeite? ˅ (www.eglo.com).