HIKOKI DS18DAWCZ 18V Cordless Driver Drill

Einführung

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your HIKOKI DS18DAWCZ 18V Cordless Driver Drill. The DS18DAWCZ is a compact and lightweight cordless driver drill designed for high performance and efficiency. It features a 2-speed gear system, a 20-stage clutch function, and a built-in LED light that activates when the trigger is pulled. Please read this manual thoroughly before using the tool.

Sicherheitshinweise

Beachten Sie stets die grundlegenden Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern. Bewahren Sie diese Anleitung zum späteren Nachschlagen auf.

• Sicherheit am Arbeitsplatz: Halten Sie den Arbeitsbereich sauber und gut beleuchtet. Unordnung oder Dunkelheit erhöhen die Unfallgefahr. Betreiben Sie Elektrowerkzeuge nicht in explosionsgefährdeten Bereichen, z. B. in der Nähe von brennbaren Flüssigkeiten, Gasen oder Stäuben.
• Elektrische Sicherheit: Vermeiden Sie Körperkontakt mit geerdeten Oberflächen wie Rohren, Heizkörpern, Herden und Kühlschränken. Setzen Sie Elektrowerkzeuge weder Regen noch Nässe aus.
• Persönliche Sicherheit: Tragen Sie stets eine Schutzbrille. Verwenden Sie Gehörschutz, wenn Sie das Werkzeug über längere Zeiträume bedienen. Kleiden Sie sich angemessen; vermeiden Sie weite Kleidung oder Schmuck. Binden Sie lange Haare zusammen.
• Werkzeuggebrauch und -pflege: Wenden Sie keine Gewalt an. Verwenden Sie das für Ihren Anwendungszweck geeignete Elektrowerkzeug. Trennen Sie den Akku vom Elektrowerkzeug, bevor Sie Einstellungen vornehmen, Zubehör wechseln oder Elektrowerkzeuge lagern.
• Verwendung und Pflege des Akkus: Laden Sie den Akku nur mit dem vom Hersteller angegebenen Ladegerät. Verwenden Sie den Akku nicht zusammen mit anderen Elektrowerkzeugen. Bewahren Sie den Akku bei Nichtgebrauch fern von anderen Metallgegenständen auf.

Packungsinhalt

Prüfen Sie beim Auspacken, ob alle Artikel vorhanden sind:

• HIKOKI DS18DAWCZ Cordless Driver Drill
• 18V Lithium-ion Batteries (2 included)
• Ladegerät
• Schraubendreherbit
• Tragetasche

Aufstellen

1. Laden des Akkus

Before first use, fully charge the battery pack. Insert the battery pack into the charger, ensuring it clicks into place. The charger indicator light will show the charging status. Once fully charged, remove the battery from the charger.

2. Einsetzen/Entfernen der Batterie

To install the battery, slide it into the base of the drill handle until it locks securely. To remove, press the battery release button (usually located at the front or sides of the battery) and slide the battery out.

3. Installing/Removing Drill Bits or Driver Bits

The HIKOKI DS18DAWCZ features a 13mm keyless chuck for quick and easy bit changes. To install a bit, rotate the chuck counter-clockwise to open the jaws. Insert the bit fully into the chuck, then rotate the chuck clockwise to tighten the jaws firmly around the bit. Ensure the bit is centered and secure before operation. To remove, rotate the chuck counter-clockwise to loosen and pull the bit out.

Bedienungsanleitung

1. Ein-/Ausschalten und variabler Geschwindigkeitsauslöser

The drill is activated by pressing the trigger switch. The speed of the drill is variable and controlled by the amount of pressure applied to the trigger. Pressing lightly results in lower speed, while pressing fully results in maximum speed. Release the trigger to turn the drill off.

2. Forward/Reverse Rotation Switch

A switch located above the trigger controls the direction of rotation. Push the switch to the left for forward (clockwise) rotation, suitable for drilling and driving screws. Push it to the right for reverse (counter-clockwise) rotation, used for removing screws or freeing a jammed drill bit. Ensure the switch is in the desired position before starting the drill.

3. 2-Speed Gear Selector

The drill features a 2-speed gear selector switch located on top of the tool. Position '1' provides lower speed and higher torque, ideal for driving screws and drilling larger holes. Position '2' provides higher speed and lower torque, suitable for faster drilling of smaller holes. Always select the appropriate gear before starting the drill.

4. Torque Adjustment Collar (20-Stage Clutch)

The torque adjustment collar, located behind the chuck, allows you to set the desired torque for screw driving applications. It has 20 settings, plus a drill mode. Rotate the collar to align the desired number with the indicator mark. Lower numbers provide less torque, preventing over-tightening or stripping screw heads. The drill symbol bypasses the clutch for maximum torque, suitable for drilling.

5. Eingebaute LED-Beleuchtung

The integrated LED light illuminates the work area when the trigger is pulled, improving visibility in dimly lit conditions.

6. Drilling and Screw Driving

For drilling, select the drill mode on the torque collar and the appropriate speed gear. Apply steady, even pressure. For screw driving, select a torque setting appropriate for the screw size and material. Start slowly and increase speed as needed. The clutch will disengage when the set torque is reached, preventing over-driving.

The drill is capable of drilling up to 13mm in mild steel and 36mm in wood. For screw driving, it can handle wood screws up to 6 x 75mm.

Wartung

1. Reinigung

Reinigen Sie die Lüftungsöffnungen des Geräts regelmäßig, um eine Überhitzung zu vermeiden. Verwenden Sie dazu ein weiches, fusselfreies Tuch.amp cloth to wipe down the exterior. Do not use harsh chemicals or abrasive cleaners. Keep the chuck jaws free of debris.

2. Batteriepflege

Store batteries in a cool, dry place away from direct sunlight and extreme temperatures. Do not store fully discharged batteries for extended periods. Recharge batteries before they are completely depleted to prolong their lifespan.

3. Speicherung

When not in use, store the drill, batteries, and charger in the provided carry case in a secure, dry location out of reach of children.

Fehlerbehebung

• Bohrer startet nicht: Ensure the battery is fully charged and properly inserted. Check the forward/reverse switch is not in the center (locked) position.
• Stromausfall während des Betriebs: Der Akku ist möglicherweise schwach. Laden Sie den Akku auf.
• Bit hält nicht sicher: Ensure the chuck is tightened sufficiently. Check for debris in the chuck jaws.
• Over-tightening screws: Adjust the torque collar to a lower setting.
• Drill bit getting stuck: Reduce pressure, ensure the correct bit is used for the material, and clear any debris from the hole.

If problems persist, contact HIKOKI customer support.

Technische Daten

Garantieinformationen

This HIKOKI product is covered by the manufacturer's standard warranty. Please refer to the warranty card included with your purchase or visit the official HIKOKI website for detailed terms and conditions. Keep your purchase receipt as proof of purchase for any warranty claims.

Unterstützung

For technical assistance, spare parts, or service, please contact HIKOKI customer support. You can find contact information on the official HIKOKI website or through your local dealer. When contacting support, please have your product model number (DS18DAWCZ) and serial number (if applicable) ready.

Hersteller: HIKOKI INDIA PVT LTD, Plot no. 9A, 1st Phase, Peenya Industrial Area, Bengaluru - 560058. India