Newgoal 1-Kanal Smart-WLAN-Relais-Schaltmodul – Benutzerhandbuch

1. Einleitung

This manual provides detailed instructions for the installation, operation, and maintenance of your Newgoal 1 Channel Smart WiFi Relay Switching Module. This wireless switch allows you to remotely control connected home appliances or electrical devices via the eWeLink app, Bluetooth, or voice commands through Amazon Alexa and Google Home. It supports various working modes to suit different applications.

2. Sicherheitshinweise

Please read and understand all safety warnings and instructions before installing or operating this device. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Vor Beginn jeglicher Verkabelungsarbeiten muss sichergestellt werden, dass die Stromzufuhr am Sicherungsautomaten unterbrochen ist.
• Sämtliche Verkabelungsarbeiten sollten von einem qualifizierten Elektriker oder gemäß den örtlichen Elektrovorschriften durchgeführt werden.
• Do not exceed the maximum current and wattage ratings of the device (10A/2000W per channel, 16A/3500W total).
• Dieses Gerät ist nur für den Gebrauch in Innenräumen bestimmt. Vermeiden Sie Feuchtigkeit und extreme Temperaturen.
• The relay is a switch with no output; the power input (AC/DC) is only for the PCBA.

3. Produktüberschreitungview

The Newgoal Smart WiFi Relay Switching Module is a compact device designed for smart home integration. It features a single channel relay for controlling electrical loads.

Figure 3.1: Newgoal 1 Channel Smart WiFi Relay Switching Module. This image shows the compact design of the smart relay module, highlighting its small form factor suitable for various installations.

Figure 3.2: Module with eWeLink and Voice Assistant Compatibility. This image illustrates the module's compatibility with eWeLink, Bluetooth, Amazon Alexa, and Google Assistant, emphasizing its versatile control options.

Schlüsselkomponenten:

• Relais: Controls the connected electrical load.
• Input Terminals (AC85V-250V or USB 5V): For powering the module.
• Output Terminals (NO, COM, NC): For connecting to the device to be controlled.
• Reset/Manual Switch Button: For pairing and manual control.
• Network Indicator/Power Indicator LED: Liefert Statusrückmeldungen.

Figure 3.3: Internal Board and Wiring Diagram. This image displays the internal circuit board of the module, clearly labeling the input terminals (AC 85-250V, USB 5V), output terminals (NO, COM, NC), reset/manual switch, network indicator, and the relay component.

4. Spezifikationen

5. Einrichtung

5.1 Verkabelung

Before wiring, ensure the power supply to the circuit is completely disconnected. Connect the module according to your application's requirements. The module can be powered by AC85V-250V or USB 5V. The relay output has Normally Open (NO), Common (COM), and Normally Closed (NC) terminals. Connect your device to be controlled to the COM and NO terminals for typical switching applications.

Refer to Figure 3.3 for a visual representation of the wiring terminals.

5.2 App-Installation & Kopplung

To control the module via your smartphone, you need to install the eWeLink app and pair the device.

1. Laden Sie die eWeLink-App herunter: Suchen nach "eWeLink" in your mobile device's app store (available for Android and iOS) and install it.
2. Registrieren/Anmelden: Öffnen Sie die eWeLink-App und registrieren Sie ein neues Konto oder melden Sie sich mit einem bestehenden Konto an.
3. Modul einschalten: Connect the module to a power source (AC85V-250V or USB 5V). The network indicator LED should start blinking.
4. Kopplungsmodus aktivieren: Press and hold the reset/manual switch button on the module for approximately 5-7 seconds until the network indicator LED blinks rapidly.
5. Gerät in der App hinzufügen: In the eWeLink app, tap the "+" icon to add a new device. Select "Quick Pairing Mode" or follow the on-screen instructions for Bluetooth pairing.
6. Mit WLAN verbinden: Enter your 2.4GHz Wi-Fi network name and password when prompted. (Note: The device only supports 2.4G WiFi networks, not 5.0G WiFi).
7. Vollständige Kopplung: The app will search for and connect to the module. Once connected, you can rename the device and assign it to a room.

Figure 5.1: eWeLink App Remote Control. This image shows the eWeLink mobile application interface, demonstrating how users can remotely control their devices from anywhere.

6. Bedienungsanleitung

6.1 Arbeitsmodi

The 1-channel relay module supports two primary working modes: Self-locking and Jog (Inching) mode. These modes can be configured within the eWeLink app.

• Selbstverriegelungsmodus: In this mode, the relay acts like a traditional on/off switch. One tap turns the device on, and another tap turns it off. The state remains until manually changed.
• Jog (Inching) Mode: In this mode, the relay will automatically turn off after a set period (0.5 to 3600 seconds) once it's turned on, or automatically turn on after a set period once it's turned off. This is useful for momentary actions like garage door openers or pulse switches. The duration can be customized in the app.

Figure 6.1: Dual Mode Options: Self-locking and Inching. This diagram visually explains the difference between self-locking mode, where channels operate independently, and inching mode, which allows for customizable timed operations.

6.2 Remote Control & Voice Control

Once paired, you can control your device using the following methods:

• eWeLink-App: Remotely turn devices on/off, set schedules, and manage groups from anywhere with an internet connection.
• Bluetooth-Steuerung: Control the device at close range even when your Wi-Fi network is disconnected.
• Amazon Alexa / Google Home: Integrate the module with your smart home ecosystem for convenient voice control. Follow the instructions within the Alexa or Google Home app to link your eWeLink account.
• Drahtlose 2.4-G-Fernbedienung: (Sold separately) For local control without needing a smartphone or internet connection.

Figure 6.2: Multiple Control Modes. This image illustrates the various ways to control the smart switch, including mobile app control, remote control, and manual control.

6.3 Device Sharing & Group Management

The eWeLink app allows for enhanced control and collaboration:

• Gerätefreigabe: Share control of your smart relay with family members or other authorized users through the eWeLink app. This enables multiple mobile phones to control the same smart device.
• Konzernleitung: Organize multiple eWeLink devices into groups for simultaneous control.
• Schedules/Timers: Set up schedules or countdown timers for automated on/off operations.

Figure 6.3: Sharing Function in eWeLink App. This image demonstrates the device sharing feature within the eWeLink app, allowing multiple users to control smart breakers from their mobile phones.

7. Wartung

The Newgoal Smart WiFi Relay Switching Module requires minimal maintenance. Follow these guidelines to ensure optimal performance:

• Halten Sie das Gerät sauber und staubfrei. Verwenden Sie zum Reinigen ein weiches, trockenes Tuch.
• Verwenden Sie keine flüssigen Reiniger oder Aerosole.
• Ensure the module is installed in a well-ventilated area to prevent overheating.
• Überprüfen Sie regelmäßig die Kabelverbindungen, um sicherzustellen, dass sie fest sitzen.

8. Fehlerbehebung

If you encounter issues with your Newgoal Smart WiFi Relay Switching Module, refer to the following common problems and solutions:

9. Garantie und Support

Newgoal products are designed for reliability and performance. For specific warranty information and technical support, please refer to the documentation included with your purchase or contact Newgoal customer service directly. You can typically find contact information on the manufacturer's weboder über Ihre Verkaufsstelle.