Einführung
This manual provides instructions for the proper use, setup, and maintenance of your WORKPRO Magnetic Hex Bit Organizer. Please read this manual thoroughly before using the product to ensure safe and efficient operation.
The WORKPRO Magnetic Hex Bit Organizer is designed to efficiently store and organize up to 38 standard 1/4 inch hex bits and one drive bit adapter. Its strong magnetic base allows for versatile placement on various ferromagnetic surfaces, keeping your bits secure and easily accessible.
Produkteigenschaften
- Leistungsstarker Magnetfuß: The organizer features a powerful magnetic base, allowing it to be securely stored in drawers or mounted on ferromagnetic surfaces like tool carts. This strong magnetic force helps retain bits within the tray.
- Speicher mit hoher Kapazität: Designed to hold up to 38 standard 1/4 inch hex bits and one drive bit adapter, this organizer provides a clear and accessible storage solution, reducing time spent searching for specific bits.
- Integrierter Zubehörstauraum: An integrated magnetic grid offers temporary storage for small parts like screws during work, preventing loss and keeping essential components within reach.
- Scratch-Free Design: The magnetic base is equipped with a soft rubberized covering made of PP+PVC, designed to prevent scratches and damage to tool surfaces when mounted or stored.
- Langlebige Konstruktion: Constructed from heavy-duty, high-impact plastic, the organizer is durable and features powerful magnets for bit retention. It is designed to withstand temperatures ranging from -23°C (-9.4°F) to 50°C (122°F).
Aufstellen
- Unpack the Organizer: Carefully remove the WORKPRO Magnetic Hex Bit Organizer from its packaging.
- Auf Schäden prüfen: Check the organizer for any signs of damage that may have occurred during shipping. If damaged, contact customer support.
- Prepare Bits: Ensure your 1/4 inch hex bits and drive bit adapter are clean and free of debris before placing them into the organizer.
- Place Bits: Insert each 1/4 inch hex bit into the individual circular slots. The magnetic base will help secure them in place.
- Utilize Adapter Slot: Place your drive bit adapter into the designated larger slot.
- Accessory Grid: Use the small magnetic grid for temporary storage of screws or other small metal parts during your work.
The organizer is ready for use once bits are placed. Its magnetic base allows for immediate placement on any suitable metal surface or within a drawer.
Bedienungsanleitung
- Platzierung: Position the organizer on a flat surface, inside a tool drawer, or attach it vertically to any ferromagnetic surface such as a tool chest or metal workbench. The rubberized magnetic base will prevent scratching.
- Bits einfügen: Gently push the 1/4 inch hex bits into the individual holes. The magnetic force will hold them securely.
- Removing Bits: Pull the desired bit straight out from its slot. The magnetic hold is strong enough to keep bits in place but allows for easy removal.
- Using the Accessory Grid: During tasks, place small metal fasteners (e.g., screws, nuts) into the magnetic grid area to prevent them from rolling away or getting lost.
Wartung
The WORKPRO Magnetic Hex Bit Organizer requires minimal maintenance to ensure its longevity and performance.
- Reinigung: Den Organizer mit einem Tuch abwischenamp cloth to remove dust, dirt, or metal shavings. Avoid using harsh chemicals or abrasive cleaners, as these may damage the plastic or rubberized base.
- Pflege der Magnetbasis: Periodically check the rubberized covering on the magnetic base for any signs of wear or damage. Ensure it remains intact to protect your tool surfaces.
- Lagerung: Store the organizer in a dry environment. While it is temperature resistant, extreme fluctuations or prolonged exposure to moisture can affect material integrity over time.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Bits fall out easily. | Bits are too heavy or not fully seated. | Ensure bits are fully inserted into the holes. For very heavy bits, consider storing the organizer horizontally. |
| Organizer slides on metal surface. | Surface is not ferromagnetic or is oily/dirty. | Clean the mounting surface and ensure it is made of a ferromagnetic material. Verify the rubberized base is clean. |
| Small parts in grid are not secure. | Parts are non-magnetic or too large/heavy. | The accessory grid is designed for small, magnetic metal parts. Ensure items placed are compatible. |
Technische Daten
- Marke: ARBEITSPRO
- Modellnummer: 820909778547
- UPC: 820909778554
- Material: High-impact Plastic, PP+PVC Soft Magnet
- Zieltyp: Lackiert
- Stückzahl: 1
- Antriebssystem: Verhexen
- Schaftform des Antriebsbits: Verhexen
- Bit-Kompatibilität: 1/4 inch hex bits, 1 drive bit adapter
- Kapazität: 38 x 1/4 inch hex bits, 1 x drive bit adapter
- Temperaturbeständigkeit: -23 °C (-9.4 °F) bis 50 °C (122 °F)
Garantieinformationen
WORKPRO products are manufactured to high-quality standards. For specific warranty details, please refer to the warranty card included with your purchase or visit the official WORKPRO webBewahren Sie Ihren Kaufbeleg für eventuelle Garantieansprüche auf.
Unterstützung
If you have any questions, require assistance, or encounter issues with your WORKPRO Magnetic Hex Bit Organizer, please contact WORKPRO customer support through the following channels:
- WebWebsite: Visit the official WORKPRO webWebsite mit FAQs, Produktregistrierung und Kontaktformularen.
- E-Mail: Refer to your product packaging or the WORKPRO webWebsite für Kundenservice-E-Mail-Adressen.
- Telefon: Contact numbers for customer support can typically be found on the WORKPRO webWebsite- oder Produktdokumentation.
Bitte halten Sie Ihre Modellnummer (820909778547) und das Kaufdatum bereit, wenn Sie sich an den Support wenden.