1. Einleitung
The SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway is a universal wireless Zigbee USB adapter designed to serve as a Zigbee coordinator or router in various smart home automation platforms. It provides a reliable and efficient way to integrate and control Zigbee-compatible devices within your smart home ecosystem, eliminating the need for multiple brand-specific hubs.
Image 1.1: The SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway with its antenna.
2. Produktüberschreitungview und Funktionen
The ZBDongle-E is engineered for robust performance and broad compatibility, offering several key features:
- Pre-flashed Firmware: Comes pre-flashed with Zigbee coordinator firmware based on EZNet 6.10.3, ready for immediate use.
- Breite Kompatibilität: Supports popular smart home platforms such as Home Assistant, openHAB, and Zigbee2MQTT.
- Hochleistungschip: Based on the EFR32MG21 chip for stable and efficient operation.
- Enhanced Output Gain: Features +20dBm output gain for extended signal reach.
- Langlebige Konstruktion: Equipped with an aluminum housing that effectively reduces signal interference from peripherals.
- Rotatable Antenna: Includes an SMA interface external rotatable antenna for optimized signal reception.
Image 2.1: The Dongle Plus-E connected to a Raspberry Pi and a laptop, illustrating its use as a universal Zigbee USB stick.
Image 2.2: Illustration of the wide range of supported open-source automation platforms, including Home Assistant, openHAB, and Zigbee2MQTT.
3. Einrichtung
Follow these steps to set up your SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway:
- Physische Verbindung: Insert the USB dongle into an available USB port on your computer or Raspberry Pi. For optimal performance and to minimize potential interference, it is recommended to use a USB 2.0 port and an extension cable to position the dongle away from the host device.
- Treiberinstallation (Windows/macOS): If you are using Windows or macOS, you may need to install the corresponding drivers. These are typically available on the SONOFF official website or through your operating system's automatic driver detection. Linux-based systems often recognize the device automatically.
- Plattformintegration:
- Home Assistant (ZHA/Zigbee2MQTT): Configure the dongle within your Home Assistant instance using either the ZHA (Zigbee Home Automation) integration or Zigbee2MQTT. Refer to the specific documentation for your chosen integration for detailed setup instructions.
- openHAB: Integrate the dongle with openHAB by adding the Zigbee binding and configuring the serial port.
- Andere Plattformen: For other open-source platforms, consult their respective documentation for Zigbee coordinator setup.
- Firmware-Verwaltung: The dongle comes pre-flashed as a Zigbee coordinator. If you wish to use it as a Zigbee router to extend your network range, you can flash the router firmware. SONOFF provides an official Dongle Flasher tool for quick and easy firmware updates directly in your browser.
Image 3.1: Screenshot of the SONOFF Dongle Flasher interface, showing supported firmware types including Zigbee Coordinator, Zigbee Router, OpenThread RCP, and MultiPAN RCP.
Image 3.2: Supported operating systems: Linux, Ubuntu, Raspbian, Windows, and macOS. Note that Windows and macOS may require driver installation.
4. Bedienungsanleitung
Once the dongle is set up and recognized by your chosen smart home platform, you can begin operating your Zigbee network:
- Geräte koppeln: Initiate the pairing mode on your smart home platform and then activate the pairing mode on your Zigbee devices. The dongle will act as the central coordinator to connect these devices to your network.
- Netzwerkverwaltung: Use your smart home platform's interface to manage your Zigbee devices, including adding, removing, and organizing them.
- Using as a Router: If you have flashed the router firmware, the dongle will extend the range of your existing Zigbee network, allowing devices further away from your main coordinator to connect reliably.
Image 4.1: Diagram illustrating how the Dongle Plus can function as a Zigbee Coordinator or be flashed as a Zigbee Router to extend the network range.
5. Wartung
To ensure the longevity and optimal performance of your SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway, consider the following maintenance guidelines:
- Umgebungsbedingungen: Operate the dongle within its specified working temperature range (-10°C to 40°C). Avoid exposing it to extreme temperatures, high humidity, or direct sunlight.
- Reinigung: Use a soft, dry cloth to clean the exterior of the dongle. Do not use liquid cleaners or aerosols.
- Firmware-Updates: Periodically check for firmware updates from SONOFF. Keeping the firmware updated can improve performance, add new features, and address potential issues.
- Physischer Schutz: Handle the dongle and its antenna with care to prevent physical damage.
6. Fehlerbehebung
If you encounter issues with your SONOFF Zigbee 3.0 USB Dongle Plus-E Gateway, consider the following troubleshooting steps:
- Gerät nicht erkannt:
- Stellen Sie sicher, dass der Dongle vollständig in den USB-Anschluss eingesteckt ist.
- Versuchen Sie es mit einem anderen USB-Port.
- Verify that necessary drivers are installed for Windows/macOS.
- Restart your host device (computer/Raspberry Pi).
- Poor Signal or Dropped Connections:
- Use a USB extension cable to move the dongle away from the host device, especially if it's connected to a USB 3.0 port, as USB 3.0 can cause 2.4GHz interference.
- Ensure the antenna is securely attached and oriented correctly.
- Consider adding Zigbee router devices (e.g., smart plugs, light bulbs) to strengthen your mesh network, especially in larger homes or areas with many obstacles.
- Check for other 2.4GHz wireless interference sources (Wi-Fi routers, microwaves) and try to minimize their proximity to the dongle.
- Geräte lassen sich nicht koppeln:
- Ensure both the dongle (via your platform) and the Zigbee device are in pairing mode.
- Bringen Sie das Gerät während des ersten Kopplungsvorgangs näher an den Dongle heran.
- Check if the device is already paired to another Zigbee network. If so, reset the device according to its manufacturer's instructions.
- Software-Specific Issues: For issues related to Home Assistant, openHAB, Zigbee2MQTT, or other software, consult their respective community forums and documentation.
7. Spezifikationen
| Attribut | Wert |
|---|---|
| Modell | ZBDongle-E |
| Eingang | DC 5V (100mA Max) |
| Arbeitstemperatur | -10°C bis 40°C |
| Kabellose Verbindung | Zigbee 3.0 (IEEE 802.15.4) |
| Schalenmaterial | Aluminiumlegierung |
| Produktabmessungen (L x B x H) | 75 x 25.5 x 13.5 mm (2.95 x 1 x 0.53 Zoll) |
| Artikelgewicht | 20 Gramm (0.705 Unzen) |
| Hardware-Schnittstelle | USB |
| Datenübertragungsrate | 5 Gigabits Per Second (Note: This refers to the USB interface speed, not Zigbee data rate) |
Image 7.1: Detailed dimensions and key specifications of the ZBDongle-E.
Image 7.2: Internal hardware description showing components like the EFR32MG21 chip, USB to serial chip, and various buttons/LEDs.
8. Garantie und Support
This product is covered by a standard return policy, typically 30 days from the date of purchase. For specific warranty details, please refer to the terms and conditions provided by your retailer at the time of purchase.
For technical support, firmware updates, and additional resources, please visit the official SONOFF webWebsite besuchen oder deren Support-Team kontaktieren:
- Hersteller: SONOFF
- Service-E-Mail: itead.cc
- Offiziell WebWebsite: www.sonoff.tech
For information regarding Proposition 65 warnings, please visit www.P65Warnings.ca.gov.
Image 8.1: Back of the product packaging, showing manufacturing details, UPC (6920075777659), and service email.
