SP CONNECT Universal Interface SPC+ Plus Bedienungsanleitung

1. Produktüberschreitungview

The SP CONNECT Universal Interface SPC+ Plus is a self-adhesive mounting system designed to securely attach your smartphone or phone case to a wide range of SP Connect mounts. This interface provides a robust and reliable connection, allowing you to use your device for navigation, tracking, or communication during various activities.

Bild 1: Vorderseite view of the SP Connect Universal Interface SPC+ Plus. This shows the central locking mechanism and the overall compact design.

2. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• 1 x New SPC+ adapter
• 1 x Interchangeable parts (specific components may vary based on kit)

3. Einrichtungsanweisungen

3.1 Attaching the Universal Interface to Your Phone Case

1. Reinigen Sie die Oberfläche: Ensure the back of your smartphone case is clean, dry, and free of dust or oils. Use an alcohol wipe if necessary and allow it to dry completely. The surface must be flat and continuous for optimal adhesion.
2. Position the Interface: Carefully peel off the protective film from the adhesive side of the SPC+ adapter. Align the adapter centrally on the back of your phone case.
3. Druck ausüben: Once positioned, press the adapter firmly onto the case for at least 30 seconds. Apply consistent pressure across the entire surface of the adapter to ensure strong adhesion.
4. Aushärten lassen: For maximum bond strength, allow the adhesive to cure for 24 hours before attaching your phone to any mount.

Bild 2: Hinten view of the SP Connect Universal Interface SPC+ Plus, showing the 3M adhesive backing. This adhesive ensures a strong and lasting bond to your phone case.

3.2 Mounting Your Phone to a Compatible SP Connect Mount

The universal interface is designed to work with all SP Connect SPC+ mounting systems. The following video demonstrates the attachment process:

For specific bicycle stem mounts, refer to the following demonstration:

4. Bedienungsanleitung

4.1 Anschließen Ihres Telefons

1. Ausrichten: Position your phone (with the attached Universal Interface) over the SP Connect mount.
2. Einstecken und drehen: Insert the interface into the mount and twist clockwise by 90 degrees until you feel and hear a click. This indicates a secure lock.

Image 3: A smartphone securely attached to a bicycle handlebar mount, demonstrating the stable position for navigation or tracking during a ride.

4.2 Trennen Ihres Telefons

1. Freischalten: Press the release button or lever on your SP Connect mount (location varies by mount type).
2. Twist and Remove: Twist your phone counter-clockwise by 90 degrees and lift it off the mount.

Image 4: A smartphone mounted on a motorcycle handlebar, showcasing the secure attachment for high-vibration environments.

5. Wartung

• Sauberkeit: Keep the Universal Interface and the SP Connect mount clean from dirt, dust, and debris to ensure optimal locking performance.
• Inspektion: Regularly inspect the adhesive bond on your phone case and the locking mechanism for any signs of wear or damage.
• Lagerung: When not in use, store the Universal Interface and mounts in a clean, dry place.

6. Fehlerbehebung

• Interface Not Locking:
  • Ensure the interface and mount are free of obstructions.
  • Verify the interface is correctly aligned before twisting.
  • Check for any damage to the locking mechanism on either the interface or the mount.
• Klebstoff hält nicht:
  • Confirm the phone case surface was clean and dry before application.
  • Ensure sufficient pressure was applied during installation and the 24-hour curing time was observed.
  • The adhesive is designed for flat, non-porous surfaces. Textured or silicone cases may not provide adequate adhesion.
• Phone Vibrating Excessively:
  • Ensure the mount is securely fastened to your vehicle or bicycle.
  • Check that the phone is fully locked into the interface and mount.

7. Spezifikationen

8. Garantie und Support

For warranty information, product support, or to purchase additional accessories, please visit the official SP CONNECT webWebsite oder wenden Sie sich an den Kundendienst.

Online-Ressourcen: Visit the SP CONNECT Store on Amazon