Einführung
This manual provides instructions for the installation, operation, and maintenance of your MOUNTUP Ultrawide Single Monitor Arm (Model MU7007) and Triple Monitor Desk Mount (Model MU0006A) bundle. Please read these instructions carefully before installation to ensure correct setup and safe operation.
Packungsinhalt
The MOUNTUP Ultrawide Single Monitor Arm & Triple Monitor Desk Mount Bundle includes the following components:
- 1 x MOUNTUP Ultrawide Single Monitor Stand (MU7007)
- 1 x MOUNTUP Triple Monitor Arm (MU0006A)
- All necessary hardware for mounting
- Bedienungsanleitung
Sicherheitshinweise
Ensure all components are present and undamaged before installation. Do not exceed the maximum weight capacity specified for each arm. Improper installation may result in property damage or personal injury. If you have any questions, contact customer support.
Setup und Installation
The monitor mounts offer two primary installation methods: C-clamp mounting and Grommet mounting. Choose the method suitable for your desk.
1. Choose Mounting Option
This image illustrates the two available mounting options: C-clamp for desk edges and grommet for desks with a pre-drilled hole. The C-clamp supports desk thicknesses from 0.39" to 1.97". The grommet mount supports desk thicknesses from 0.39" to 1.97" and hole diameters from 0.39" to 3.15".
C-Clamp Montage:
- Befestigen Sie die C-clamp Die Basis bis zur Kante Ihres Schreibtisches.
- Ziehen Sie die Klammer fest.amp sicher, um Stabilität zu gewährleisten.
Tüllenmontage:
- Insert the grommet base through the pre-drilled hole in your desk.
- Secure the base from underneath the desk using the provided hardware.
2. Monitorarme anbringen
Once the base is secure, attach the monitor arms to the central pole or base as per the specific instructions for the MU7007 and MU0006A models.
3. Attach Monitors
Attach your VESA-compatible monitors to the mounting plates on the arms. Ensure the VESA screws are tightened firmly.
4. Kabelmanagement
Utilize the integrated cable management channels within the arms to route and conceal monitor cables, maintaining a tidy workspace.
This image demonstrates how to install the detachable USB connector into the base of the monitor arm. The USB cable is not included with the product.
Bedienungsanleitung
The MOUNTUP monitor arms provide full motion capabilities for optimal viewKomfort.
Adjusting Monitor Position (Single Arm MU7007)
This image displays the articulation capabilities of the single monitor arm. It can tilt from +90° to -45°, swivel 180° at two points, and rotate 360° for landscape or portrait orientation.
- Neigung: Adjust the monitor screen vertically from +90° to -45° to reduce glare and optimize viewing-Winkel.
- Schwenken: Pivot the monitor horizontally up to 180° at the arm joints to share your screen or adjust your view, um die Position zu ändern.
- Drehung: Drehen Sie den Monitor um 360°, um zwischen Quer- und Hochformat zu wechseln.
Adjusting Monitor Position (Triple Arm MU0006A)
This image demonstrates the full range of motion for the triple monitor arm. Each monitor can tilt ±90°, swivel 180°, and rotate 360°. The arms also allow for 360° swivel at the base and 270° swivel at the mid-joint for flexible screen arrangements.
- Neigung: Each monitor can be tilted ±90° for individual screen angle adjustment.
- Schwenken: Each monitor can swivel 180°. The arm joints also allow for 360° and 270° swivel for extensive positioning.
- Drehung: Each monitor can rotate 360° for landscape or portrait viewing.
Height Adjustment and Gas Spring Tension
This image illustrates the counterbalance height adjustment feature, showing a maximum height of 19.7 inches and a minimum height of 6.7 inches. The upgraded gas spring provides smoother adjustments.
The monitor arms feature an integrated gas spring for smooth and effortless height adjustments. To adjust the tension, use the provided Allen key to turn the adjustment screw located on the arm. Turn clockwise to increase tension for heavier monitors, and counter-clockwise to decrease tension for lighter monitors. Adjust until the monitor stays at the desired height without drifting.
Multiple Screen Setups
This image displays several possible configurations for multiple monitors using the triple monitor arm, demonstrating flexibility for different workspace needs, including horizontal alignment, stacked arrangements, and mixed portrait/landscape orientations.
The triple monitor arm allows for various screen setups to optimize your workflow. Experiment with different orientations and positions to find the most ergonomic and productive arrangement for your needs.
Wartung
To ensure the longevity and proper function of your MOUNTUP monitor arms, follow these maintenance guidelines:
- Reinigung: Wischen Sie die Oberflächen mit einem weichen, damp Mit einem Tuch abwischen. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel, die die Oberfläche beschädigen könnten.
- Inspektion: Überprüfen Sie regelmäßig alle Schrauben und Verbindungen, um sicherzustellen, dass sie fest sitzen. Ziehen Sie sie gegebenenfalls nach.
- Gasfeder: If the gas spring tension feels off, re-adjust it according to the operating instructions.
Fehlerbehebung
If you encounter issues with your monitor arms, refer to the following common solutions:
- Monitor-Durchhänger oder -Drifts: The gas spring tension may be too low for the monitor's weight. Increase the gas spring tension by turning the adjustment screw clockwise.
- Difficulty Moving Monitor: Die Gasfederspannung ist möglicherweise zu hoch. Verringern Sie die Gasfederspannung, indem Sie die Einstellschraube gegen den Uhrzeigersinn drehen.
- Arm is Loose: Check all mounting screws at the base and arm joints. Tighten any loose connections.
- Monitor Not Level: Adjust the tilt mechanism on the VESA plate to level the monitor.
If problems persist, contact MOUNTUP customer support for assistance.
Technische Daten
Below are the general specifications for the MOUNTUP monitor arm bundle. Specific details may vary slightly between the single (MU7007) and triple (MU0006A) arms.
This image highlights the enhanced capabilities of the upgraded ultrawide mount (MU7007), showing a maximum height of 19.7 inches, maximum extension of 22.6 inches, fit for screens up to 35 inches, and a weight capacity of up to 26.5 lbs.
This image provides compatibility and dimension details for the triple monitor arm (MU0006A). It supports monitors weighing 4.4-19.8 lbs (2-9 kg) each, fits screen sizes up to 27 inches, and is compatible with VESA patterns 75x75mm and 100x100mm. The maximum extension is 58.9 inches with 11.4 inches of height adjustment.
| Besonderheit | Ultrawide Single Monitor Arm (MU7007) | Triple Monitor Desk Mount (MU0006A) |
|---|---|---|
| Montagetyp | Tischmontage (C-clamp oder Öse) | Tischmontage (C-clamp oder Öse) |
| Bewegungstyp | Articulating, Rotate, Tilt, Swivel | Articulating, Rotate, Tilt, Swivel |
| Kompatible Geräte | Monitor | Monitore |
| Gewichtskapazität | Bis zu 26.5 Pfund | 4.4-19.8 lbs (2-9 kg) per monitor |
| An Bildschirmgröße anpassen | Bis zu 35 Zoll | Up to 27 inches per monitor |
| VESA-Kompatibilität | 75x75mm, 100x100mm | 75x75mm, 100x100mm |
| Maximale Höhenverstellung | 19.7 Zoll | 11.4 Zoll |
| Maximale Erweiterung | 22.6 Zoll | 58.9 Zoll |
Garantieinformationen
MOUNTUP products are tested for durability and backed by a 3-year support period. This warranty covers defects in materials and workmanship under normal use. For warranty claims or further details, please contact MOUNTUP customer support.
Kundenservice
For any pre-purchase questions, installation assistance, troubleshooting, or warranty inquiries, please contact MOUNTUP customer support. Refer to the MOUNTUP official webDie Kontaktdaten finden Sie auf der Website oder in Ihren Kaufunterlagen.
