1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Onforu 100W LED Security Light with Motion Sensor. Please read this manual thoroughly before installation and retain it for future reference.
The Onforu 100W LED Security Light is designed for outdoor use, providing bright illumination with energy efficiency and motion detection capabilities. It features a durable, waterproof design suitable for various weather conditions.
2. Wichtige Sicherheitshinweise
WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Ensure the power supply is turned off before attempting any installation or maintenance.
- Die Installation sollte von einem qualifizierten Elektriker oder einer Person durchgeführt werden, die mit dem Aufbau und der Funktionsweise des Produkts sowie den damit verbundenen Gefahren vertraut ist.
- Überprüfen Sie, ob die Versorgungsspannungtage is correct (AC 100-240V).
- Do not install on surfaces that are unstable or prone to vibration.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
- Schauen Sie nicht direkt in die eingeschaltete LED-Lichtquelle, da dies zu Augenschäden führen kann.
- This fixture is rated IP65 for outdoor use, protecting against dust and water jets. However, it should not be submerged in water.
3. Produktüberschreitungview
The Onforu 100W LED Security Light features three adjustable light heads and an integrated motion sensor. Its robust design ensures reliable performance in outdoor environments.
3.1 Hauptmerkmale
- Hohe Helligkeit: 100W LED with 9000 lumens output, equivalent to 500W traditional bulbs.
- Bewegungserkennung: 180° sensing angle, detection range of 16.4 to 32.8 feet.
- Einstellbares Design: Three light heads can be adjusted to cover a 270° illumination zone.
- Langlebige Konstruktion: Die-cast aluminum housing for efficient heat dissipation and extended lifespan.
- Wetterfest: IP65 waterproof rating for protection against rain, sleet, and snow.
- Energieeinsparung: Reduces electricity consumption significantly compared to traditional lighting.
3.2 Produktkomponenten
Refer to the image below for a visual representation of the product components.
Abbildung 1: Onforu 100W LED Security Light with Motion Sensor. This image displays the front view of the security light, showing its three adjustable LED panels and the motion sensor located beneath the central panel.
Abbildung 2: Explodierte view illustrating the internal components of the LED security light, including the 100W LED lamp beads and high-precision light transmission design.
4. Installationsanweisungen
Before beginning installation, ensure all necessary tools are available and the power supply is disconnected.
4.1 Recommended Mounting Height and Sensing Area
For optimal performance, install the light at a height of 10 to 16.4 feet (3 to 5 meters) from the ground. The motion sensor has a 180° sensing angle and can detect motion up to 16.4 to 32.8 feet (5 to 10 meters) away.
Abbildung 3: Diagram showing the versatile motion detection capabilities, recommended mounting height (10-16 ft), and sensing distance (16.4-32.8 ft) for the security light.
Video 1: This video demonstrates the motion detection capabilities of the Onforu 100W LED Security Light, showing how it illuminates an area when a car or person approaches, and then turns off after a set time. It also highlights the wide illumination angle and range.
4.2 Schaltplan
The fixture requires a standard AC power connection. Follow the wiring color codes:
- Schwarzes Kabel: Live Wire (L)
- Grüner Draht: Erdungskabel (G)
- Weißer Draht: Neutralleiter (N)
Abbildung 4: Detailed diagram showing the wiring connections (Live, Ground, Neutral) and overall dimensions of the security light.
4.3 Montageschritte
- Bereiten Sie die Montagefläche vor: Stellen Sie sicher, dass die Montagefläche stabil ist und das Gewicht der Vorrichtung tragen kann.
- Montageplatte anbringen: Secure the mounting plate to the wall or soffit using appropriate screws and anchors.
- Verkabelung anschließen: Carefully connect the Live, Ground, and Neutral wires from your power supply to the corresponding wires on the fixture. Use wire nuts to secure connections.
- Montieren Sie die Vorrichtung: Attach the light fixture to the mounting plate and secure it with the provided screw.
- Lichtköpfe einstellen: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten screws once adjusted. The light heads can be adjusted up to 270 degrees.
Abbildung 5: Explodierte view illustrating the easy installation process, showing the mounting plate, wiring connections, and how the fixture attaches.
Abbildung 6: Image demonstrating the adjustable light heads, allowing for a 270-degree detection zone and flexible illumination angles.
5. Bedienungsanleitung
The motion sensor has three adjustable settings to customize its operation:
Abbildung 7: Close-up of the motion sensor with three adjustment knobs labeled DISTANCE, LUX, and TIME.
- ABSTAND (Empfindlichkeit): Adjusts the detection range of the motion sensor from 16.4 feet (Min) to 32.8 feet (Max). Turn the knob clockwise to increase sensitivity, counter-clockwise to decrease.
- TIME (Delay Time): Sets how long the light remains on after motion is detected and no further motion is sensed. Adjustable from 10 seconds (Min) to 7 minutes (Max). Turn clockwise for longer duration.
- LUX (Ambient Light Sensor): Determines the ambient light level at which the motion sensor will activate the light.
- Day Mode (Sun icon): Motion detection works during both day and night.
- Night Mode (Moon icon): Motion detection works only at night or in low-light conditions.
6. Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und Langlebigkeit Ihrer Sicherheitsbeleuchtung.
- Reinigung: Reinigen Sie die Leuchte und die Linse des Bewegungsmelders regelmäßig mit einem weichen,amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Inspektion: Regularly check for any loose wiring, damaged components, or signs of wear. Ensure the mounting is secure.
- LEDs: Die LED-Lichtquelle ist integriert und kann vom Benutzer nicht ausgetauscht werden.
Abbildung 8: Image illustrating the IP65 waterproof rating of the security light, showing its resilience in rain, snow, and sunny conditions.
7. Fehlerbehebung
If you encounter issues with your Onforu LED Security Light, refer to the following common problems and solutions:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. |
|
|
| Licht bleibt dauerhaft an. |
|
|
| Licht blinkt oder flackert. |
|
|
| Bewegungssensor erkennt nicht. |
|
|
8. Produktspezifikationen
| Besonderheit | Detail |
|---|---|
| Marke | Onforu |
| Modellname | Motion Sensor Outdoor Light (BDD100G-3) |
| Wastage | 100 Watt |
| Helligkeit | 9000 Lumen |
| Farbtemperatur | 6000 Kelvin (Kaltweiß) |
| Lichtquellentyp | LED |
| Material | Die-cast Aluminum, Metal |
| Wasserbeständigkeit | IP65 Wasserdicht |
| Bewegungssensorwinkel | 180° |
| Bewegungssensor-Entfernung | 16.4 feet ~ 32.8 feet |
| Einstellung der Verzögerungszeit | 10 Sekunden ~ 7 Minuten |
| Technische Daten | 10 Zoll L x 7 Zoll B x 6 Zoll H |
| Artikelgewicht | 3.05 Pfund |
| Installationstyp | Wandhalterung |
| Verwendung im Innen- und Außenbereich | Im Freien |
9. Garantie und Support
The Onforu 100W LED Security Light (Model BDD100G-3) comes with a 2 Jahr Garantie ab Kaufdatum.
For technical support, warranty claims, or any questions regarding your product, please contact Onforu customer service. Refer to the official Onforu webDie aktuellsten Kontaktinformationen finden Sie auf dieser Webseite.
Online-Hilfe: Besuchen Sie die Onforu Store on Amazon für Produktinformationen und Supportressourcen.
