Einführung
This manual provides detailed instructions for the safe and correct installation and operation of your PERLESMITH TV Wall Mounts, including the PSMTK1 Tilting Mount and the PSMFK7 Full Motion Mount. Please read all instructions carefully before beginning installation to ensure proper setup and to prevent damage or injury.
Wichtige Sicherheitsinformationen
WARNUNG: Failure to read and follow all instructions can result in personal injury, property damage, or voiding of your warranty. If you do not understand these instructions or have doubts about the safety of the installation, please contact customer support.
- Do not install on drywall alone. The mount must be secured to a single wood stud, solid concrete, or brick wall.
- Stellen Sie sicher, dass die Wandkonstruktion das Gesamtgewicht der Halterung und Ihres Fernsehers sicher tragen kann.
- Always use an assistant for lifting and positioning the television.
- Do not exceed the maximum weight capacity specified for each mount model.
- Überprüfen Sie regelmäßig alle Verbindungen und Befestigungselemente, um sicherzustellen, dass sie fest sitzen.
Packungsinhalt
Verify that all components are present and undamaged before installation. If any parts are missing or defective, contact PERLESMITH customer service.
PSMFK7 Full Motion TV Wall Mount Components
Image: The PSMFK7 full motion TV wall mount, showing the articulating arm, TV plate, wall plate, and small accessories like cable ties and a bubble level.
- Full Motion Wall Plate Assembly
- TV-Halterungen (x2)
- Montagezubehör-Set (verschiedene Schrauben, Dübel, Unterlegscheiben)
- Wasserwaage
- Kabelbinder
PSMTK1 Tilting TV Wall Mount Components
Image: The PSMTK1 tilting TV wall mount, showing the wall plate, TV brackets, and small accessories like cable ties and a bubble level.
- Tilting Wall Plate
- TV-Halterungen (x2)
- Montagezubehör-Set (verschiedene Schrauben, Dübel, Unterlegscheiben)
- Wasserwaage
- Kabelbinder
Setup und Installation
1. Prüfungen vor der Installation
- TV-Kompatibilität prüfen:
For PSMFK7: Fits most 26"-55" TVs up to 70 lbs (31.8 kg) with VESA patterns from 100x100mm to 400x400mm.
For PSMTK1: Fits most 23"-60" TVs up to 115 lbs (52 kg) with VESA patterns from 75x75mm to 400x400mm.
Image: Visual guide for PSMFK7 compatibility, indicating TV size range, weight capacity, and VESA mounting patterns.
- Wandtyp identifizieren: This mount is designed for installation on single wood studs, solid concrete, or brick walls. NICHT ausschließlich auf Trockenbauwänden installieren.
- Check for Cable Blockage: Ensure the TV's power and input ports will not be blocked by the mounting brackets.
2. Anbringen der TV-Halterungen am Fernseher
- Legen Sie Ihren Fernseher vorsichtig mit dem Bildschirm nach unten auf eine weiche, saubere Oberfläche.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's VESA mounting holes.
- Attach the two TV brackets to the back of your TV using the selected hardware. Ensure the brackets are level and securely fastened.
3. Montage der Wandplatte
- Determine the desired height for your TV. Mark the drilling locations on the wall.
- Für die Montage von Holzständerwerk: Use a stud finder to locate the center of a wood stud. Drill pilot holes (e.g., 7/32" or 5.5mm) at the marked locations. Secure the wall plate using lag bolts and washers.
- Für die Installation von Beton-/Ziegelwänden: Drill pilot holes (e.g., 3/8" or 10mm) at the marked locations. Insert concrete anchors into the holes. Secure the wall plate using lag bolts and washers.
- Use the included bubble level to ensure the wall plate is perfectly horizontal before tightening all fasteners.
4. Montage des Fernsehers an der Wandplatte
- With an assistant, carefully lift the TV with the attached brackets.
- Hook the TV brackets onto the wall plate. Ensure the TV is securely seated on the mount.
- For PSMFK7: Befestigen Sie den Fernseher mit den mitgelieferten Sicherheitsschrauben oder Verriegelungsmechanismen an der Halterung.
- For PSMTK1: Engage the locking mechanism with the quick release pull-down straps to secure the TV.
Image: Simplified installation steps for the PSMTK1 mount, illustrating how the TV brackets hook onto the wall plate and the use of the pull cord for locking and releasing.
Operating Your TV Mount
PSMFK7 Full Motion Mount Adjustments
Image: Demonstrates the PSMFK7 mount's flexibility, including tilting down 15 degrees, extending up to 19.17 inches, swiveling 180 degrees, and leveling +/-3 degrees.
- Neigungseinstellung: The mount features a +5°/-15° tilt range. Loosen the tilt knobs on the TV brackets, adjust the TV to the desired angle, and then tighten the knobs to secure.
- Schwenkeinstellung: The articulating arm allows for a +/-90° swivel. Gently push or pull the TV to the desired viewing-Winkel.
- Aus-/Einfahren: Extend the TV up to 19.17 inches (48.7 cm) from the wall for optimal viewing or retract it back to 3.2 inches (8.1 cm) for a low-profile sehen.
- Nivellierungseinstellung: After installation, you can make a +/-3° leveling adjustment to ensure the TV is perfectly horizontal.
PSMTK1 Tilting Mount Adjustments
- Neigungseinstellung: The PSMTK1 allows for a downward tilt. Loosen the tilt bolts on the side of the TV brackets, adjust the TV to the desired angle, and then tighten the bolts.
- Verriegelungsmechanismus: Use the pull-down straps to engage or disengage the quick-release locking mechanism, securing the TV to the wall plate.
Wartung
- Überprüfen Sie regelmäßig alle Schrauben und Bolzen, um sicherzustellen, dass sie fest angezogen sind.
- Reinigen Sie die Halterung mit einem weichen, trockenen Tuch. Vermeiden Sie die Verwendung von Scheuermitteln oder Lösungsmitteln.
- Ensure no cables are pinched or stressed by the mount's movement.
Fehlerbehebung
- Der Fernseher ist nicht waagerecht: Use the leveling adjustment feature (PSMFK7) or re-adjust the tilt bolts (PSMTK1) and ensure the wall plate was installed level.
- Die Halterung fühlt sich locker an: Re-check all wall plate and TV bracket fasteners. Ensure they are tightened securely. If installed on a wood stud, confirm the lag bolts are fully engaged in the stud. If on concrete, ensure anchors are properly seated.
- Difficulty moving full motion mount: Check for any obstructions. Ensure all pivot points are free of debris. If the movement is too stiff or too loose, some joints may have adjustable tension screws (refer to specific model diagrams if available).
- Fehlende Teile: Do not proceed with installation. Contact PERLESMITH customer support for replacement parts.
Technische Daten
| Besonderheit | PSMTK1 Neigehalterung | PSMFK7 Full Motion Mount |
|---|---|---|
| Kompatibilität mit TV-Größen | 23" - 60" | 26" - 55" |
| Gewichtskapazität | 115 kg | 70 kg |
| VESA-Kompatibilität | 75 x 75 mm bis 400 x 400 mm | 100 x 100 mm bis 400 x 400 mm |
| Bewegungstyp | Neigung | Schwenken, Neigen, Ausziehen |
| Neigungswinkel | Adjustable downward tilt | +5° / -15° |
| Schwenkwinkel | N / A | +/-90° |
| Nivellierung | N / A | +/-3° |
| Verlängerung von der Wand | Niedriger Profile | 3.2" bis 19.17" (8.1 cm bis 48.7 cm) |
| Material | Legierter Stahl | |
| Farbe | Schwarz | |
| Montagetyp | Wandhalterung | |
Garantieinformationen
PERLESMITH products are manufactured with quality and care. For specific warranty details, please refer to the warranty card included with your product or visit the official PERLESMITH webBewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
Kundenservice
If you have any questions, require assistance with installation, or need replacement parts, please contact PERLESMITH customer support. Our team is available to help you.
- WebWebsite: www.perlesmith.com (Hypothetical link, please replace with actual if available)
- E-Mail: support@perlesmith.com (Hypothetical email, please replace with actual if available)
- Telefon: 1-800-XXX-XXXX (Hypothetical number, please replace with actual if available)
