Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your GE Appliances WR30X30972 Refrigerator Ice Maker. This genuine GE replacement part is designed to ensure reliable ice production for your compatible refrigerator model.
The ice maker includes the ice mold and the control device. It receives water from the water inlet valve, freezes it, and then automatically ejects the ice into the storage bin, refilling as needed until the bin is full.
Sicherheitshinweise
- Always unplug the refrigerator from the power source before attempting any installation, maintenance, or repair. Failure to do so can result in electrical shock or injury.
- Safely store any food that could deteriorate while the refrigerator power is off.
- Tragen Sie während der Installation geeignete persönliche Schutzausrüstung, wie z. B. Handschuhe.
- Wenn Sie sich bei einem der Schritte unsicher sind, wenden Sie sich an einen qualifizierten Haushaltsgerätetechniker.
Setup und Installation
This section outlines the general steps for replacing or installing the WR30X30972 ice maker. Specific refrigerator models may have slight variations.
- Bereiten Sie den Kühlschrank vor: Ensure the refrigerator is unplugged from the wall outlet. Remove all ice from the ice storage bin and any shelves or drawers that obstruct access to the ice maker compartment.
- Remove Old Ice Maker (if applicable):
Locate the existing ice maker. Typically, it is secured by one or more screws and connected by a power clip or wiring harness. Carefully disconnect the wiring harness and remove any mounting screws. Gently detach the old ice maker.
Image Description: This image shows the rear and underside of the ice maker, highlighting the electrical connector and the water fill tube. This view is helpful for understanding how the unit connects to the refrigerator's power and water supply.
- Neuen Eiswürfelbereiter einbauen:
Position the new WR30X30972 ice maker in the designated compartment. Align the mounting points with the screw holes in the refrigerator. Secure the ice maker with the appropriate screws.
Image Description: This image displays the GE WR30X30972 ice maker from the front and side, clearly showing the ice mold, the ejector mechanism, and the ON/OFF switch on the side of the control box. This is the primary view der zusammengebauten Einheit.
- Connect Wiring and Water Line:
Connect the wiring harness from the refrigerator to the ice maker's electrical connector. Ensure a secure connection. If applicable, ensure the water fill tube is properly aligned with the ice maker's water inlet.
Image Description: A detailed close-up of the electrical connector for the ice maker, showing the pins and housing. This image is useful for verifying the correct connection during installation.
- Strom wiederherstellen: Once the ice maker is securely installed and all connections are made, plug the refrigerator back into the power outlet.
Bedienungsanleitung
The GE WR30X30972 ice maker operates automatically once installed and powered.
- Aktivierung: Ensure the ice maker's ON/OFF switch (located on the side of the control box) is in the "ON" position.
- Erste Eisproduktion: After installation, it may take several hours for the ice maker to produce its first batch of ice. Discard the first few batches of ice to ensure the system is clean.
- Automatische Operation: The ice maker will automatically fill the ice mold with water, freeze it, and then eject the ice into the ice storage bin. It will continue this cycle until the ice bin is full, at which point a sensor will temporarily halt production.
- Stopping Ice Production: To stop the ice maker from producing ice, move the ON/OFF switch to the "OFF" position.
Image Description: This image provides a side view of the ice maker, detailing the ice mold where water freezes and the ejector arm that pushes the formed ice cubes into the bin. This view helps illustrate the ice production mechanism.
Wartung
Regelmäßige Wartung trägt dazu bei, eine optimale Leistung und Langlebigkeit Ihres Eiswürfelbereiters zu gewährleisten.
- Reinigung des Eisbehälters: Periodically empty and clean the ice storage bin with mild soap and warm water. Rinse thoroughly and dry before returning it to the freezer.
- Wasserfilter: Wenn Ihr Kühlschrank über einen Wasserfilter verfügt, stellen Sie sicher, dass dieser gemäß den Empfehlungen des Herstellers ausgetauscht wird, um die Wasserqualität zu erhalten und Mineralablagerungen im Eisbereiter zu verhindern.
- Inspect Water Line: Occasionally check the water supply line for any kinks, leaks, or damage.
Fehlerbehebung
Refer to the following common issues and solutions before contacting service.
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Keine Eisproduktion |
|
|
| Ice freezing on ejector tray / Water overflow |
|
|
| Kleine oder hohle Eiswürfel |
|
|
Technische Daten
- Modellnummer: WR30X30972
- Marke: GE Haushaltsgeräte
- Produktabmessungen: 13.25 x 4 x 10 Zoll
- Gewicht: 2.4 Pfund
- Kompatible Kühlschrankmodelle: GE GSH25JSTASS, GE GSL25JFPABS, GE GSL25JFTABS, GE GSS20IEMBWW, GE GTE19JSNRSS, GE HSS25GFPAWW
- UPC: 084691856849
Garantieinformationen
The GE Appliances WR30X30972 Refrigerator Ice Maker comes with a limited one-year warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For specific terms and conditions, please refer to the warranty documentation provided with your original refrigerator or contact GE Appliances customer service.
Kundenservice
For further assistance, technical support, or to inquire about warranty claims, please contact GE Appliances customer service. You can find contact information on the official GE Appliances webSie finden die Informationen auf der Website oder in der Bedienungsanleitung Ihres Kühlschranks.
Online-Ressourcen: GE Appliances Service & Support
