Einführung
Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.
Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.
Sicherheitshinweise
Beachten Sie beim Umgang mit Elektrowerkzeugen stets grundlegende Sicherheitsvorkehrungen, um das Risiko von Bränden, Stromschlägen und Verletzungen zu verringern.
- Lesen Sie das Handbuch: Lesen und verstehen Sie alle Anweisungen, bevor Sie das Gerät bedienen.
- Bereich freihalten: Kinder, Umstehende und Haustiere sind vom Arbeitsbereich fernzuhalten.
- Schutzausrüstung tragen: Tragen Sie stets Schutzbrille, Handschuhe und geeignetes Schuhwerk.
- Avoid Contact with Blades: Never touch the blades while the tool is running or connected to power.
- Sicherer Halt: Halten Sie das Werkzeug während des Betriebs stets mit beiden Händen fest.
- Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
- Laden: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
- Lagerung: Bewahren Sie das Werkzeug an einem trockenen, sicheren Ort außerhalb der Reichweite von Kindern auf.
Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.
Packungsinhalt
Prüfen Sie beim Auspacken, ob alle Artikel vorhanden und in gutem Zustand sind:
- 1 x WORKPRO Grass and Shrub Shear Unit
- 1 x Grass Blade (75 mm wide)
- 1 x Shrub Blade (120 mm length)
- 1 x Typ-C Ladekabel
- 1 x Benutzerhandbuch
Produkt überview
Familiarize yourself with the components of your WORKPRO shear:
Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.
- Haupteinheit: Ergonomic body with integrated motor and battery.
- Grass Blade: Designed for trimming grass edges, 75mm cutting width.
- Strauchblatt: Designed for shaping shrubs and small branches, 120mm cutting length.
- Typ-C-Ladeanschluss: Zum Aufladen des internen Akkus.
- Sicherheitsverriegelungstaste: Verhindert versehentliches Starten.
- Ein / Aus Schalter: Activates the motor when the safety lock is disengaged.
- Klingenfreigabeknopf: Ermöglicht einen schnellen und einfachen Klingenwechsel.
- Rutschfester TPR-Griff: Bietet einen komfortablen und sicheren Halt.
Aufstellen
Laden des Akkus
The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.
- Locate the Type-C charging port on the tool.
- Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
- The charging indicator light will illuminate (typically red) during charging.
- Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
- Trennen Sie das Ladegerät, sobald der Ladevorgang abgeschlossen ist.
Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.
Installation/Wechsel der Klingen
Ensure the tool is turned off and disconnected from any power source before changing blades.
- Press the Blade Release Button located on the top of the tool.
- Carefully remove the currently installed blade by pulling it away from the unit.
- Align the desired blade (grass or shrub) with the slot on the tool.
- Push the blade firmly into place until it clicks, indicating it is securely locked.
- Verify the blade is securely attached by gently pulling on it.
Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.
Bedienungsanleitung
Always wear appropriate safety gear before operating the shear.
Starten und Stoppen des Tools
- Stellen Sie sicher, dass die gewünschte Klinge fest montiert ist.
- Halten Sie das Werkzeug fest.
- To start, press and hold the Safety Lock-off Button with your thumb.
- While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
- To stop, release the ON/OFF Switch. The blades will stop.
Verwendung der Grasschere
The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.
- Ensure the grass blade (75mm wide) is installed.
- Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
- Move the tool slowly and steadily along the grass edge.
- Avoid cutting wet grass, as it can clog the blades and reduce efficiency.
Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.
Using the Shrub Shear Blade
The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.
- Ensure the shrub blade (120mm length) is installed.
- Hold the tool at a comfortable angle for trimming.
- Work in small sections, making smooth, even passes.
- Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.
Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.
Wartung
Regelmäßige Wartung gewährleistet optimale Leistung und verlängert die Lebensdauer Ihres Werkzeugs.
Reinigung
- Always turn off the tool and remove the blade before cleaning.
- Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
- Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
- Wipe the blades with a lightly oiled cloth to prevent rust.
Klingenpflege
- The blades are made of premium 65Mn steel for high hardness and wear resistance.
- Inspect blades regularly for damage or dullness.
- If blades become dull, they can be sharpened by a professional or replaced.
- Store blades in a dry place to prevent corrosion.
Bild: Nahaufnahme view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.
Lagerung
- Bewahren Sie das Werkzeug an einem kühlen, trockenen Ort, fern von direkter Sonneneinstrahlung und Feuchtigkeit auf.
- Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
- Außerhalb der Reichweite von Kindern und unbefugten Benutzern aufbewahren.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Werkzeug startet nicht | Die Batterie ist schwach oder leer Sicherheitssperre nicht gedrückt Blade not properly installed | Laden Sie den Akku auf Ensure both safety lock and ON/OFF switch are pressed simultaneously Reinstall blade until it clicks securely |
| Die Klingen schneiden nicht effektiv | Die Klingen sind stumpf oder verschmutzt Material being cut is too thick Batterie schwach | Clean blades; sharpen or replace if dull Do not attempt to cut branches thicker than 7.8mm Laden Sie den Akku auf |
| Das Werkzeug stoppt während des Betriebs. | Batterie ist leer Überlastschutz aktiviert | Laden Sie den Akku auf Reduce cutting load; allow tool to cool down before resuming |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | W159021AU |
| Batterie Voltage | 3.6 V |
| Batteriekapazität | 2000 mAh Lithium-Ionen- |
| Leerlaufdrehzahl | 1100 U/min |
| Grashalmbreite | 75 mm |
| Strauchblattlänge | 120 mm (effective cutting length 118mm) |
| Max. Cutting Thickness (Shrub) | 7.8 mm |
| Ladezeit | 2-3 hours (with 5V/1A charger) |
| No-Load Operation Time | ≥ 40 Minuten |
| Technische Daten | 26 x 6 x 10.5 cm |
| Gewicht | Approx. 370 g (unit only), 900 g (with packaging) |
| Klingenmaterial | High Carbon Steel (65Mn Steel) |
| Hersteller | Hang Zhou Great Star Industrial Co.,LTD |
Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.
Garantie und Support
Informationen zur Garantie oder technische Unterstützung erhalten Sie beim Hersteller oder Ihrer Verkaufsstelle. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis auf.
Hersteller: Hang Zhou Great Star Industrial Co.,LTD
For further assistance, visit the WORKPRO official webWebsite oder wenden Sie sich an den Kundendienst.
