PTZOptics Move 4K Auto-Tracking PTZ-Kamera – Bedienungsanleitung

Produkt überview

The PTZOptics Move 4K 30x Auto-Tracking PTZ Camera is designed for high-quality video production, offering advanced features such as auto-tracking, auto-framing, and 4K resolution at 60 frames per second. It is suitable for various applications including education, conferences, and live broadcasts. This manual provides essential information for setting up, operating, and maintaining your camera.

Abbildung 1: Vorderseite view of the PTZOptics Move 4K Camera.

Auspacken und Packungsinhalt

Upon unboxing your PTZOptics Move 4K camera, ensure all components are present. The package typically includes the following items:

• PTZOptics Move 4K Camera (30X model)
• 12V AC-Netzteil
• USB-AA-Kabel
• RS232-Kabel
• Kurzanleitung
• IR-Fernbedienung
• (2) AA-Batterien

Abbildung 2: Seite view of the PTZOptics Move 4K Camera, showcasing sein elegantes Design.

Aufstellen

Follow these steps to set up your PTZOptics Move 4K camera:

1. Stromanschluss: Connect the provided 12V AC Power Supply to the DC 12V port on the back of the camera. Alternatively, if your network supports Power over Ethernet (PoE), you can connect an Ethernet cable to the LAN port for both power and data.
2. Resolution and Frame Rate Selection: Before powering on, select your desired video resolution and frame rate using the yellow dial labeled "SYSTEM SELECT" on the back of the camera. Refer to the Quick Start Guide or the table on the bottom of the camera for available options.
3. Erstes Einschalten: Once powered, the camera will perform an initial pan and tilt movement. The "POWER" light on the front will illuminate.
4. Konnektivität: Connect the camera to your live streaming, recording, or conferencing device using the appropriate output ports (USB 2.0, 3G-SDI, or HDMI).

Abbildung 3: Rückseite view of the camera, highlighting the various input/output ports including DC 12V, LAN (PoE), USB 2.0, 3G-SDI, HDMI, RS232, RS485, and audio line in/out.

Bedienungsanleitung

The PTZOptics Move 4K camera offers multiple control options and features for seamless operation:

• Auto-Tracking and Auto-Framing: Utilize the camera's built-in auto-tracking and auto-framing capabilities to automatically follow a subject or keep multiple subjects framed within the shot.
• Tally-Licht: A built-in tally light located above the lens indicates whether the camera is live (red) or in preview mode, helping talent stay in sync with the production.
• Steuerungsoptionen: The camera can be controlled via the included IR remote, network connection, RS-232, RS-485, Web UI, PTZ Control App, or a Camera Management Platform.
• Gleichzeitige Ausgänge: The camera provides simultaneous video outputs via NDI, USB, and IP, along with either SDI or HDMI, allowing for flexible integration into various production workflows.

Figure 4: This diagram illustrates how the PTZOptics camera can be used for live streaming directly to platforms like YouTube and Facebook Live, with audio input via 3.5mm.

Wartung

To ensure the longevity and optimal performance of your PTZOptics Move 4K camera, follow these general maintenance guidelines:

• Reinigung: Reinigen Sie das Kameragehäuse mit einem weichen, trockenen Tuch. Verwenden Sie für das Objektiv ein spezielles Objektivreinigungstuch und eine entsprechende Reinigungslösung, um Kratzer zu vermeiden. Verwenden Sie keine scharfen Chemikalien oder Scheuermittel.
• Staubschutz: Keep the camera in a clean, dust-free environment when not in use. Consider using a dust cover.
• Temperatur und Luftfeuchtigkeit: Operate and store the camera within recommended temperature and humidity ranges to prevent damage to internal components.
• Firmware-Updates: Periodically check the PTZOptics official website for any available firmware updates. Keeping the firmware updated can improve performance, add new features, and resolve potential issues.

Fehlerbehebung

If you encounter issues with your PTZOptics Move 4K camera, consider the following troubleshooting steps:

• Kein Strom: Ensure the power supply is securely connected and the power outlet is functional. If using PoE, verify your network switch provides sufficient power.
• Keine Videoausgabe: Check all video cable connections (HDMI, SDI, USB, Ethernet). Verify the selected resolution and frame rate on the camera's system select dial are compatible with your receiving device.
• Kontrollprobleme: Ensure the IR remote batteries are fresh and there are no obstructions between the remote and the camera. For network control, verify the camera's IP address and network settings.
• Probleme mit der Bildqualität: Check lighting conditions. Ensure the lens is clean and free from smudges or dust. Adjust white balance and exposure settings as needed.
• Kamera reagiert nicht: Try pressing the "RESTORE" button on the back of the camera to reset it to factory defaults. This may resolve software-related glitches.

Technische Daten

Garantie und Support

For detailed warranty information, technical support, and additional resources, please visit the official PTZOptics website or refer to the documentation included with your product. You may also find helpful information and protection plans available on the PTZOptics Store on Amazon.