1. Einleitung
The JHS The Kilt V2 Overdrive and Fuzz Guitar Effects Pedal, developed in collaboration with guitarist Stu G, is a versatile tone machine designed to cover a wide range of dirt box needs for studio and touring musicians. This manual provides detailed instructions for the setup, operation, and maintenance of your Kilt V2 pedal and the accompanying Red Remote Footswitch.
2. Produktüberschreitungview
2.1 JHS The Kilt V2 Pedal
Bild: Draufsicht view of the JHS The Kilt V2 pedal, showcasing its Volume, Tone, Cut, Flat, Gain, G1, and G2 controls, along with the footswitch and LED indicator.
The Kilt V2 pedal features a robust set of controls to sculpt your desired overdrive and fuzz tones:
- Lautstärkeregler: Regelt den Gesamtausgangspegel des Pedals.
- Tone-Regler: Adjusts the high-end frequencies, allowing for brighter or darker tones.
- Gain-Regler: Controls the amount of drive/distortion applied to your signal.
- Cut/Flat Toggle Switch: Modifies the high-end response. In 'Cut' mode, it reduces high frequencies, while 'Flat' provides a full-range response.
- G1 Toggle Switch: Aktiviert einen zusätzlichen Gewinntage for more riffy grit.
- G2 Toggle Switch: Engages a higher gain stage, providing increased saturation and sustain suitable for lead tones.
2.2 JHS Red Remote Footswitch
Image: The compact JHS Red Remote Footswitch, featuring a single footswitch and a 1/4" jack.
The Red Remote Footswitch is designed to remotely activate the G2 toggle switch on compatible JHS pedals, including the Kilt V2. This allows for on-the-fly switching between different gain settings without needing to reach down to the pedal itself.
3. Einrichtung
3.1-Leistungsanforderungen
The JHS The Kilt V2 pedal requires a standard 9V DC power supply (not included) with a center-negative barrel connector. Ensure your power supply meets these specifications to prevent damage to the unit.
3.2 Anschließen des Pedals
- Verbinde deine Gitarre mit dem EINGANG jack on the right side of the Kilt V2 pedal using a standard 1/4" instrument cable.
- Verbinden Sie AUSGABE jack on the left side of the Kilt V2 pedal to your amplifier or the next pedal in your signal chain using a standard 1/4" instrument cable.
- Plug your 9V DC power supply into the power input jack.
3.3 Connecting the Red Remote Footswitch
To use the Red Remote Footswitch with your Kilt V2 pedal:
- Connect the Red Remote Footswitch to the G2 REMOTE jack (indicated by a red washer) on the Kilt V2 pedal using a standard 1/4" instrument cable.
- Once connected, the Red Remote Footswitch will control the G2 toggle, disabling the pedal's onboard G2 toggle switch.
4. Bedienungsanleitung
4.1 Kilt V2 Pedal Operation
The Kilt V2 offers a range of tonal possibilities:
- Basic On/Off: Press the main footswitch to engage or bypass the pedal. The LED indicator will illuminate when the pedal is active.
- Verstärkungseinstellungen:
- Lightest Gain: With both G1 and G2 toggles in the down position, you achieve an amp-like, chimey breakup.
- Riffy Grit: Flip the G1 toggle up to add a touch of drive for more aggressive rhythm tones.
- Lead Tones: Flip the G2 toggle up for increased saturation and sustain, ideal for lead playing.
- Over the Top Fuzz: Engage both G1 and G2 toggles for an almost gated, fat distorted fuzz tone.
- Tonformung: Use the Tone knob to adjust the brightness. The Cut/Flat toggle allows for further high-end refinement, cutting frequencies in 'Cut' mode or providing a full response in 'Flat' mode.
- Lautstärkeregelung: Adjust the Volume knob to match your desired output level with your bypassed signal or to provide a boost.
Video: Official JHS Pedals demonstration of the Kilt V2 Overdrive and Fuzz Pedal, showcasing its various tonal capabilities and controls.
4.2 Red Remote Footswitch Operation
The Red Remote Footswitch provides convenient remote control over the Kilt V2's G2 gain stage:
- Press the footswitch on the Red Remote to toggle the G2 gain stage on or off. This allows for quick transitions between lower and higher gain settings during live performance or practice.
5. Wartung
Proper care will ensure the longevity and optimal performance of your JHS pedals:
- Reinigung: Reinigen Sie die Außenseite des Pedals mit einem weichen, trockenen Tuch. Vermeiden Sie scheuernde Reiniger oder Lösungsmittel.
- Lagerung: Bewahren Sie das Pedal bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Stromversorgung: Always use a compatible 9V DC center-negative power supply. Disconnect power when the pedal is not in use for extended periods.
6. Fehlerbehebung
If you encounter issues with your JHS pedals, try the following:
- Kein Ton: Überprüfen Sie alle Kabelverbindungen (Gitarre, Pedal, amp, power). Ensure the power supply is correctly connected and functioning. Test with different cables or a different power supply if available.
- Unerwartetes Geräusch/Brummen: Ensure all cables are properly shielded. Try a different power outlet or power supply. Check for ground loops if using multiple pedals.
- LED leuchtet nicht: Verify the power supply connection and functionality. If the pedal is engaged but the LED is off, there might be an internal issue requiring professional service.
7. Spezifikationen
| Besonderheit | Beschreibung |
|---|---|
| Marke | JHS Pedale |
| Modell | The Kilt V2 Overdrive and Fuzz Pedal |
| Mitgeliefertes Zubehör | Red Remote Footswitch |
| Audioausgabeeffekte | Overdrive, Fuzz |
| Stromquelle | 9 V Gleichstrom (Netzteil nicht im Lieferumfang enthalten) |
| Color (Pedal) | Grau |
| Color (Footswitch) | Rot |
8. Garantie und Support
JHS Pedals products are covered by a manufacturer's warranty against defects in materials and workmanship. For detailed warranty information, product registration, or technical support, please visit the official JHS Pedals webBesuchen Sie die Website oder kontaktieren Sie den Kundenservice. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
