Einführung
Thank you for choosing the VAXCEL T0697 Bronze Motion Sensor Outdoor Security Flood Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new security light. Please read all instructions carefully before installation and retain this manual for future reference.
Image: The VAXCEL Bronze Motion Sensor Outdoor Security Flood Light mounted on the exterior of a house, illuminating the area.
Sicherheitshinweise
- WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Dieses Produkt muss gemäß den geltenden Installationsvorschriften von einer Person installiert werden, die mit der Konstruktion und Bedienung des Produkts und den damit verbundenen Gefahren vertraut ist.
- Use only UL or ETL listed wire for connections.
- Nicht in der Nähe von brennbaren Materialien installieren.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
Lieferumfang
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- Security Flood Light Fixture
- Montagezubehör
- Schatten
- Bedienungsanleitung
Note: Light bulbs (2 x 150 watt PAR 38 medium base E26 screw-in bulbs) are not included. LED compatible.
Setup und Installation
This VAXCEL security light is designed for hardwired installation and can be mounted to a wall or eave. Ensure the mounting surface is structurally sound and capable of supporting the fixture's weight.
Montageoptionen
The fixture offers flexible mounting options, allowing for installation on either a wall or an eave. The light heads and motion sensor are adjustable to direct light where needed most.
Image: A diagram illustrating the flexibility of the VAXCEL flood light, showing how it can be mounted on a wall or an eave, with arrows indicating the rotatable light heads and sensor joint for optimal positioning.
Verdrahtungsanweisungen
- Schalten Sie den Strom am Leistungsschalter oder Sicherungskasten ab.
- Attach the mounting bracket to the junction box using the provided hardware.
- Connect the fixture's wires to the household wiring: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground). Secure connections with wire nuts.
- Stecken Sie alle Drähte vorsichtig in die Anschlussdose.
- Mount the fixture to the mounting bracket, ensuring a tight seal against the mounting surface to prevent water intrusion.
- Install two PAR38 E26 base bulbs (not included) into the sockets.
- Stellen Sie die Stromversorgung am Leistungsschalter wieder her.
Technische Daten
Image: A technical drawing providing the precise measurements of the VAXCEL flood light fixture, indicating its length, width, and height for installation planning.
Bedienungsanleitung
Your VAXCEL security flood light features advanced motion sensing and dusk-to-dawn capabilities, offering multiple modes for customized security and energy efficiency.
Image: A visual representation of the three primary operational modes of the VAXCEL flood light: motion sensor activation, automatic dusk-to-dawn operation, and manual switch control.
Bewegungssensorfunktion
- Erfassungsbereich: The sensor detects motion within a 240-degree range and up to 85 feet.
- Einstellbare Empfindlichkeit: The motion sensitivity can be adjusted to cover distances up to 85 feet, preventing false triggers from distant objects.
- Motion Shut-off Delay: Customize how long the light stays on after motion is detected, with settings from 5 seconds to 3 minutes.
Image: A graphic demonstrating the wide 240-degree detection angle and adjustable range (10-85 feet) of the motion sensor, highlighting its effectiveness in various outdoor settings including around corners and along walls.
Dusk-to-Dawn Photocell
The integrated photocell automatically turns the fixture on when it gets dark and off when it becomes light, providing continuous security and saving energy during daylight hours.
Dual-Level Brightness & Modes
- Low-Level Brightness: The light can operate at approximately 30% brightness during periods of no motion.
- High-Level Brightness: Upon motion detection, the light automatically switches to 100% brightness.
- Early Evening Timer: Set the light to stay on at low-level brightness for 0, 3, or 6 hours after dusk before switching to motion-only mode.
- 5 automatische Modi: Further customize the light's behavior with five distinct operational modes to suit your specific security needs.
Image: A detailed graphic outlining the fully customizable settings of the VAXCEL flood light, including options for motion shut-off delay, sensitivity, early evening timer, various operating modes, and the dual-level brightness feature.
Wartung
- Reinigung: Reinigen Sie die Leuchte mit einem weichen,amp Tuch. Keine Scheuer- oder Lösungsmittel verwenden.
- Lampenwechsel: Ensure power is off before replacing bulbs. Use two 150-watt maximum PAR38 E26 medium base screw-in bulbs. LED compatible bulbs can be used for energy efficiency.
- Haltbarkeit: The fixture is constructed from weather-resistant plastic material, suitable for outdoor use in various conditions.
Image: The VAXCEL flood light shown enduring rain and snow, emphasizing its robust outdoor durability and weather-resistant construction.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Licht geht nicht an. | No power; faulty bulb; sensor malfunction. | Check circuit breaker. Replace bulbs. Ensure sensor is clean and unobstructed. |
| Licht bleibt dauerhaft an. | Sensor in test mode; continuous motion detected; wiring error. | Check sensor mode. Remove obstructions. Verify wiring connections. |
| Licht blinkt oder flackert. | Loose wiring; incompatible bulb; power fluctuations. | Check all wiring connections. Use recommended bulbs. Consult an electrician if power issues persist. |
| Bewegungssensor erkennt nicht. | Sensor obstructed; incorrect sensitivity setting; improper angle. | Clear obstructions. Adjust sensitivity. Reposition sensor for optimal coverage. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Marke | VAXCEL |
| Modellname | T0697 |
| Farbe | Bronze |
| Material | Plastik |
| Technische Daten | 8.75 Zoll L x 11.75 Zoll B x 8 Zoll H |
| Verwendung im Innen- und Außenbereich | Im Freien |
| Stromquelle | Festverdrahtet |
| Installationstyp | Wall Mounted (also Eave Mount) |
| Besondere Merkmale | Adjustable Heads, Dusk to Dawn Sensor, Motion Sensor |
| Reichweite des Bewegungssensors | 240 Degree, 85 Ft. |
| Lampensockel | E26 Mittel |
| Wastage (maximal) | 2 x 150 watts (bulbs not included) |
| Bandtage | 120 Volt |
| Wasserbeständigkeit | Wasserabweisend |
| Zertifizierung | ETL-gelistet |
Garantie
This VAXCEL product comes with a limited warranty. Please refer to the warranty card included in your packaging for specific terms and conditions, or visit the VAXCEL webWebsite für weitere Informationen.
Produktvideo
Sehen Sie sich dieses Video für eine Weile anview of VAXCEL lighting products, showcasing various styles and applications.
Video: An informational video titled "About Vaxcel Lighting" providing a general overview of VAXCEL's lighting solutions.
Kundenservice
For further assistance, technical support, or warranty claims, please contact VAXCEL customer service. Contact information can typically be found on the VAXCEL webauf der Website oder auf der Produktverpackung.
