Einführung
This manual provides detailed instructions for the installation, operation, and maintenance of your Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light. This outdoor flood light features a motion sensor and dusk-to-dawn functionality, offering efficient and reliable illumination for various outdoor spaces. Please read these instructions thoroughly before installation and use to ensure proper function and safety.
Bild: Vorderseite view of the Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light, showcasing its three adjustable heads and integrated motion sensor.
Sicherheitshinweise
- WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.
- Dieses Produkt muss gemäß den geltenden Installationsvorschriften von einer Person installiert werden, die mit der Konstruktion und Bedienung des Produkts und den damit verbundenen Gefahren vertraut ist.
- Use only UL or ETL listed wire for connections.
- Installieren Sie diese Leuchte nicht mit nassen Händen oder auf nassem oder trockenem Untergrund.amp Oberflächen.
- Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
- This fixture is designed for outdoor use and is wet location rated (IP65).
Packungsinhalt
Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:
- 1 x Feit Electric S10.5TFL/850/MOT/BZ LED Security Flood Light
- Befestigungsmaterial (Schrauben, Drahtverbinder, Dichtung)
- Bedienungsanleitung
Setup und Installation
This flood light is designed for hardwired, flush mount installation on a wall. Ensure the mounting surface is stable and can support the fixture's weight.
Erforderliche Werkzeuge (nicht im Lieferumfang enthalten):
- Schraubendreher
- Abisolierzangen
- Zange
- Isolierband
- Schutzbrille
Installationsschritte:
- Strom ausschalten: Locate the circuit breaker controlling the outdoor lighting circuit and turn off the power. Verify power is off using a voltage Tester.
- Montagefläche vorbereiten: Stellen Sie sicher, dass die elektrische Anschlussdose sicher installiert und zugänglich ist.
- Attach Mounting Back Plate: Secure the fixture's mounting back plate to the junction box using the provided screws. Ensure the gasket is properly seated between the back plate and the mounting surface for a weather-tight seal.
- Drahtverbindungen: Connect the fixture's wires to your household wiring. Match the wires:
- Black (Live) zu Black (Live)
- Weiß (Neutral) zu Weiß (Neutral)
- Grünes oder blankes Kupfer (Erdung) zu grünem oder blankem Kupfer (Erdung)
- Montagevorrichtung: Carefully align the fixture with the mounting back plate and secure it with the remaining screws. Ensure no wires are pinched.
- Seal (Optional but Recommended): Apply a bead of silicone caulk around the perimeter of the fixture where it meets the mounting surface to prevent water intrusion.
- Strom wiederherstellen: Schalten Sie den Strom am Leistungsschalter wieder ein.
Image: Illustration of the hands-free wiring and mounting back plate, demonstrating how the fixture attaches to the wall for installation.
Bedienungsanleitung
Your Feit Electric LED Security Flood Light is equipped with both a motion sensor and dusk-to-dawn technology for automated operation.
Dämmerungs- bis Morgengrauen-Funktionalität:
The integrated photocell sensor automatically detects ambient light levels. The light will remain off during daylight hours and activate its motion sensing capabilities only when it gets dark. This ensures energy efficiency by preventing the light from operating unnecessarily during the day.
Image: A visual comparison illustrating the effect of dusk-to-dawn functionality, showing the light off during the day and on at night.
Funktionsweise des Bewegungssensors:
Once the dusk-to-dawn sensor detects darkness, the motion sensor becomes active. It detects movement within a 180-degree range and up to 60 feet away. Upon detecting motion, the flood light will illuminate to its full 5000 lumens. After a period of no detected motion, the light will automatically turn off or dim down to 500 lumens if configured for lower light levels.
Einstellen der Leuchtenköpfe:
The three LED light heads are independently adjustable, allowing you to direct the light output up to 270 degrees of coverage. Loosen the adjustment screws on each head, position the light as desired, and then securely tighten the screws.
Wartung
The Feit Electric LED Security Flood Light is designed for low maintenance and durability, featuring rugged, weather-resistant aluminum housing and shatter-resistant polycarbonate lenses.
Reinigung:
- Stellen Sie vor der Reinigung sicher, dass der Strom ausgeschaltet ist.
- Wischen Sie die Leuchte mit einem weichen,amp Tuch.
- Do not use abrasive cleaners or solvents, as these can damage the finish or lenses.
Inspektion:
- Periodically inspect the fixture for any signs of damage to the housing or wiring.
- Check that the mounting remains secure.
Image: The flood light mounted on an exterior wall, demonstrating its robust construction and IP65 wet-location rating, capable of withstanding various weather conditions.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Licht geht nachts nicht an. | No power; Dusk-to-dawn sensor detecting too much light; Faulty wiring. | Check circuit breaker; Ensure no ambient light is interfering with the sensor; Verify wiring connections. |
| Das Licht bleibt tagsüber an. | Dämmerungssensor blockiert oder defekt. | Clear any obstructions from the sensor; If problem persists, contact support. |
| Motion sensor not detecting movement or range is poor. | Sensor obstructed; Incorrect sensor angle; Environmental factors (temperature, wind). | Clear obstructions; Adjust sensor angle for optimal coverage; Test in different conditions. |
| Das Licht flackert oder wird unerwartet dunkler. | Loose wiring connection; Power fluctuations. | Check and secure all wiring connections; Consult an electrician if power fluctuations are suspected. |
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | S10.5TFL/850/MOT/BZ |
| Marke | Feit Electric |
| Stromquelle | Kabelgebundene Elektrik |
| Bandtage | 120 Volt (Wechselstrom) |
| Wastage | 46 Watt |
| Helligkeit | 5000 Lumens (Adjustable 500-5000 Lumens) |
| Farbtemperatur | 5000K Tageslicht |
| Lichtquellentyp | LED |
| Bewegungssensor | 180°-Erfassungswinkel, Reichweite bis zu 60 m |
| Abenddämmerung bis zum Morgengrauen | Ja |
| Verstellbare Köpfe | Yes, up to 270° coverage |
| Material | Aluminum (Housing), Polycarbonate (Lens) |
| Technische Daten | 10 Zoll L x 7.4 Zoll B x 8.3 Zoll H |
| IP-Schutzart | IP65 (Wet Location Rated) |
| Lebensdauer | 50,000 Stunden |
| Montagetyp | Wall Mount, Flush Mount |
| UPC | 017801763256 |
Image: A detailed diagram outlining the key specifications of the flood light, such as dimensions, wattage, brightness, color temperature, and IP rating.
Garantie
The manufacturer states that there is no explicit warranty description provided for this product. Please refer to your retailer's return policy or contact Feit Electric directly for any warranty-related inquiries.
Kundenservice
For further assistance, technical support, or to inquire about replacement parts, please contact Feit Electric customer service.
You can also visit the official Feit Electric store for more information and products: Feit Electric Store
