Einführung
Thank you for choosing the KSE-Lights KS-5400-IX Charger. This manual provides essential information for the safe and efficient operation of your charger. It is designed to charge compatible KSE-Lights devices, specifically the KS-7840-IX Power and KS-7830-IX Performance models. Please read this manual thoroughly before use and keep it for future reference.
Sicherheitshinweise
Um einen sicheren Betrieb zu gewährleisten und Schäden zu vermeiden, beachten Sie bitte die folgenden Sicherheitsvorkehrungen:
- Das Ladegerät darf weder Regen, Feuchtigkeit noch extremen Temperaturen ausgesetzt werden.
- Use only the provided power adapter or a compatible KSE-Lights approved adapter.
- Versuchen Sie nicht, das Ladegerät zu zerlegen oder zu verändern. Alle Wartungsarbeiten dürfen nur von qualifiziertem Fachpersonal durchgeführt werden.
- Keep the charger away from flammable materials and heat sources.
- Sorgen Sie während des Betriebs für ausreichende Belüftung rund um das Ladegerät.
- Ziehen Sie den Stecker des Ladegeräts aus der Steckdose, wenn es nicht benutzt wird oder bevor Sie es reinigen.
- This charger is designed for specific KSE-Lights devices. Do not attempt to charge incompatible batteries or devices.
Packungsinhalt
Überprüfen Sie, ob alle Artikel in Ihrem Paket vorhanden sind:
- 1 x KSE-Lights KS-5400-IX Charger Unit
- 1 x Netzteil
Produkt überview
The KSE-Lights KS-5400-IX is a compact and robust charger designed for efficient power delivery to your KSE-Lights devices. Below is an image illustrating the charger unit and its accompanying power adapter.
Bild: The KSE-Lights KS-5400-IX charger unit (left) and its power adapter with cable (right). The charger unit is black, with a red button on top and a label on the bottom indicating "IX-Charger KS-5400-IX Input: 12V 0.5A Qi compatible" and "KSE-LIGHTS GmbH Germany". The power adapter is also black and features a ribbed design.
The charger unit features a dedicated slot for compatible KSE-Lights batteries or devices. The red button visible on the top of the charger unit is typically used for releasing the device or indicating charging status, depending on the specific device being charged. The bottom label confirms its model and input specifications, indicating it is a 12V 0.5A charger and is Qi compatible, suggesting wireless charging capabilities for compatible devices.
Aufstellen
Follow these steps to set up your KSE-Lights KS-5400-IX Charger:
- Place the charger unit on a stable, flat, and dry surface.
- Connect the power adapter cable to the designated input port on the KSE-Lights KS-5400-IX charger unit.
- Plug the power adapter into a standard electrical outlet (100-240V AC, 50/60Hz).
- Stellen Sie sicher, dass alle Verbindungen sicher sind, bevor Sie fortfahren.
Bedienungsanleitung
To charge your KSE-Lights device:
- Ensure the charger is properly set up and connected to a power source.
- Carefully insert your compatible KSE-Lights device (e.g., KS-7840-IX Power or KS-7830-IX Performance) into the charging slot of the KS-5400-IX charger unit. Ensure it clicks securely into place.
- The charger will typically indicate the charging status via an LED indicator (refer to your device's manual for specific LED behavior).
- Allow the device to charge until fully charged. Avoid overcharging by disconnecting the device once charging is complete.
- To remove the device, press the red release button (if applicable) and gently pull the device out of the charging slot.
Notiz: Charging times may vary depending on the battery level and model of the device being charged.
Wartung
Durch sachgemäße Wartung wird die Langlebigkeit Ihres Ladegeräts gewährleistet:
- Reinigung: Disconnect the charger from the power outlet before cleaning. Use a soft, dry cloth to wipe the exterior of the charger. Do not use liquid cleaners or abrasive materials.
- Lagerung: Bewahren Sie das Ladegerät bei Nichtgebrauch an einem kühlen, trockenen Ort fern von direkter Sonneneinstrahlung und extremen Temperaturen auf.
- Inspektion: Periodically inspect the power cord and charger unit for any signs of damage. If damage is found, discontinue use and contact KSE-Lights support.
Fehlerbehebung
If you encounter issues with your charger, refer to the table below:
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Ladegerät lässt sich nicht einschalten. | Kein Strom aus der Steckdose; lockere Verbindung; defekter Adapter. | Check power outlet with another device; ensure all cables are securely connected; try a different outlet. |
| Gerät wird nicht geladen. | Device not properly seated; incompatible device; faulty device battery. | Ensure device is fully inserted into the charging slot; confirm device compatibility with KS-5400-IX; test device with another charger if possible. |
| Langsamer Ladevorgang. | Using a non-standard power source; high ambient temperature. | Ensure you are using the original power adapter; move charger to a cooler environment. |
If the problem persists after trying these solutions, please contact KSE-Lights customer support.
Technische Daten
| Besonderheit | Detail |
|---|---|
| Modellnummer | KS-5400-IX |
| Marke | KSE-Lights |
| Teilenummer | KS-5400-IX |
| Technische Daten | 13 x 13 x 9 cm |
| Gewicht | 270 g |
| Farbe | Schwarz |
| Material | Metall |
| Stromquelle | Battery Powered (charger itself is powered by AC adapter to charge batteries) |
| Eingangslautstärketage (from OCR) | 12 V, 0.5 A |
| Qi Compatible (from OCR) | Ja |
| Im Lieferumfang enthaltene Komponenten | Installation hardware (as per product data, likely referring to the charger unit and adapter) |
| Batterien enthalten? | NEIN |
| Batterien erforderlich? | No (for the charger itself to operate) |
| UPC | 779205829913 |
| Verfügbarkeit von Ersatzteilen in der EU | 1 Jahre |
Garantie und Support
KSE-Lights products are manufactured to high quality standards. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims. For technical support, troubleshooting assistance, or information regarding spare parts availability, please contact KSE-Lights customer service through their official webWebsite oder autorisierte Händler.
Information regarding spare parts availability in the EU is guaranteed for 1 year from the date of first availability.
