Feit Electric 2x2 LED Troffer Light Instruction Manual

Einführung

This manual provides detailed instructions for the safe installation, operation, and maintenance of your Feit Electric 2x2 LED Troffer Light, Model TR2X2G2/6WY/WH. Please read all instructions carefully before beginning installation and retain this manual for future reference.

Sicherheitshinweise

WARNUNG: Stromschlaggefahr. Vor Installation oder Wartung die Stromzufuhr an der Sicherung oder dem Leitungsschutzschalter unterbrechen.

VORSICHT: Geeignet für damp Standorte. Nicht an Orten verwenden, an denen es direkt Wasser ausgesetzt ist.

• Stellen Sie sicher, dass alle elektrischen Anschlüsse den örtlichen Vorschriften und Verordnungen sowie dem National Electric Code (NEC) entsprechen.
• Wenn Sie mit der korrekten Installation elektrischer Leitungen nicht vertraut sind, wenden Sie sich an einen qualifizierten Elektriker.
• Do not attempt to alter the fixture. Any alterations may void the warranty and create a safety hazard.
• This fixture is designed for 120-277V operation. Verify your supply voltage vor der Installation.

Packungsinhalt

Vor der Installation prüfen Sie, ob alle Komponenten vorhanden sind:

• 1 x Feit Electric 2x2 LED Troffer Light (Model TR2X2G2/6WY/WH)
• Bedienungsanleitung

Bild: Vorderseite view of the Feit Electric 2x2 LED Troffer Light.

Setup und Installation

This LED troffer light is designed for lay-in installation in standard T-grid ceilings. It includes a hook mount for simplified wiring.

Erforderliche Werkzeuge (nicht im Lieferumfang enthalten):

• Schraubendreher
• Abisolierzangen
• Zange
• Schutzbrille

Installationsschritte:

1. Strom ausschalten: Before starting, ensure the power supply to the installation area is completely disconnected at the circuit breaker or fuse box.
2. Deckenöffnung vorbereiten: Ensure the ceiling grid opening is a standard 2x2 foot size.
3. Verkabelung anschließen:
   • Open the wiring compartment on the back of the fixture.
   • Connect the incoming AC power wires to the fixture's wires: Black to Black (Line), White to White (Neutral), and Green to Green (Ground).
   • If using 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires from the fixture to the corresponding wires from your 0-10V dimmer (dimmer not included). Ensure proper polarity.
   • Secure all connections with appropriate wire connectors.
4. Position Vorrichtung: Carefully place the LED troffer into the T-grid ceiling opening. The fixture is lightweight and designed for easy handling.
5. Secure Fixture (Optional but Recommended): Use the integrated hook mounts to secure the fixture to the ceiling grid for added stability.
6. Strom wiederherstellen: Sobald die Installation abgeschlossen und alle Verbindungen sicher hergestellt sind, schalten Sie die Stromversorgung am Leistungsschalter wieder ein.

Bild: Example of the Feit Electric 2x2 LED Troffer Light installed in a T-grid ceiling.

Bedienungsanleitung

Color Temperature Selection (5CCT)

Your Feit Electric LED Troffer Light features selectable color temperatures, allowing you to choose from five options:

• Weiches Weiß (3000 K)
• Neutralweiß (3500K)
• Helles Weiß (4000K)
• Tageslicht (5000K)
• Daylight Deluxe (6500K)

You can select the desired color temperature in two ways:

1. Vor der Installation: Locate the CCT selection switch on the side of the fixture. Slide the switch to your preferred color temperature setting.
2. After Installation (Wall Switch Toggle): If the CCT selection switch is set to 'SWITCH' mode, you can cycle through the color temperatures by quickly toggling your standard wall switch OFF and ON. The fixture will remember the last selected setting after a few seconds.

Image: Diagram illustrating the 5CCT selection options and methods.

0-10V Dimmen

This fixture is equipped for 0-10V dimming. It is nicht kompatibel with standard residential dimmers. To utilize the dimming function, connect the purple (DIM+) and gray (DIM-) wires to a compatible 0-10V dimmer (sold separately). This allows for smooth dimming from 10% to 100% light output.

Wartung

The Feit Electric 2x2 LED Troffer Light is designed for long-lasting, maintenance-free operation. No user-serviceable parts are inside.

• Reinigung: Um die Leuchte zu reinigen, stellen Sie sicher, dass der Strom abgeschaltet ist. Verwenden Sie ein weiches, trockenes oder leicht angefeuchtetes Tuch.amp cloth. Do not use harsh chemicals or abrasive cleaners, as these may damage the finish or optical components.
• Lamp Ersatz: The LEDs are integrated and not replaceable. The fixture has a rated life of 50,000 hours.

Fehlerbehebung

If you experience issues with your LED Troffer Light, refer to the following common solutions:

Technische Daten

Detailed specifications for the Feit Electric 2x2 LED Troffer Light:

Image: Visual representation of the fixture's dimensions and key specifications.

Garantie

This Feit Electric product is covered by a 5 Jahr eingeschränkte Garantie from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty service, please contact Feit Electric customer support.

Kundenservice

For technical assistance, troubleshooting, or warranty inquiries, please contact Feit Electric customer support:

• WebWebsite: www.feit.com
• Telefon: Siehe Feit Electric webWebseite für aktuelle Kontaktnummern.