Hansa HANSAVANTIS Stil Basin Mischbatterie, 179 mm Ausladung, Modell 54802107 – Benutzerhandbuch

1. Produktüberschreitungview

This manual provides essential information for the installation, operation, and maintenance of your Hansa HANSAVANTIS Style wall-mounted basin mixer tap, model 54802107. Please read these instructions carefully before installation and retain them for future reference.

The Hansa HANSAVANTIS Style mixer tap is designed for wall mounting with a concealed body, featuring a 179 mm projection spout and a chrome finish. It includes a temperature limiter and an adjustable hot water stop for safety and comfort.

Abbildung 1: Hansa HANSAVANTIS Style Wall-Mounted Basin Mixer Tap. This image displays the chrome-finished tap with its fixed spout and single lever handle, designed for wall installation.

2. Sicherheitshinweise

• Vor Beginn der Installation oder Wartungsarbeiten muss sichergestellt werden, dass alle Wasserleitungen abgestellt sind.
• Die Installation sollte von einem qualifizierten Fachmann durchgeführt werden, um die Einhaltung der örtlichen Sanitär- und Bauvorschriften zu gewährleisten.
• Verwenden Sie keine Scheuermittel oder aggressive Chemikalien auf der Chromoberfläche, da dies die Oberfläche beschädigen kann.
• The maximum water temperature for this product is +80°C. Exceeding this temperature may cause damage or injury.
• Always test for leaks after installation and before fully enclosing the wall.

3. Packungsinhalt

Vergewissern Sie sich vor Beginn der Installation, dass alle Komponenten vorhanden sind:

• 1x Hansa HANSAVANTIS Style Basin Mixer Tap (chrome finish)
• Adjustable hot water stop mechanism
• Installationsanleitung (dieses Handbuch)
• Mounting hardware for concealed body (specific components may vary based on concealed body model, sold separately)

4. Einrichtung und Installation

This mixer tap is designed for wall-mounted installation with a separate concealed body (not included). Follow the instructions provided with your concealed body for its installation first.

4.1. Prüfungen vor der Installation

1. Ensure the wall opening for the concealed body is correctly sized and positioned according to the concealed body's instructions.
2. Verify that hot and cold water supply lines are accessible and correctly marked.
3. Confirm that the wall surface is clean, dry, and structurally sound.

4.2. Mounting the Tap Components

1. After the concealed body is installed and secured within the wall, connect the tap's spout and handle components to the outlets of the concealed body.
2. Secure the decorative plate (escutcheon) to the wall, ensuring it covers the concealed body opening neatly.
3. Attach the fixed spout, ensuring a secure, watertight connection. The spout has a projection of 179 mm.
4. Install the single lever handle. Ensure smooth operation and proper alignment.
5. Adjust the hot water stop as desired. This feature limits the maximum hot water temperature to prevent scalding. Refer to the concealed body's manual for specific adjustment procedures if not detailed here.

Abbildung 2: Dimensional Drawing. This diagram provides critical measurements for installation, including the 179 mm spout projection and overall dimensions of the visible components.

4.3. Prüfungen nach der Installation

1. Drehen Sie langsam die Hauptwasserversorgung auf.
2. Check all connections for leaks. Tighten any loose connections carefully.
3. Test the hot and cold water flow and temperature adjustment.

5. Bedienungsanleitung

The Hansa HANSAVANTIS Style mixer tap features a single lever for controlling both water flow and temperature.

• Wasserdurchfluss: Lift the lever upwards to increase water flow. Push it downwards to decrease or shut off the flow.
• Wassertemperatur: Move the lever to the left for hot water and to the right for cold water. The further left or right you move it, the hotter or colder the water will become, respectively.
• Temperaturbegrenzer: The integrated temperature limiter and adjustable hot water stop help prevent excessively hot water, enhancing safety.

6. Wartung

6.1. Cleaning the Tap

• Reinigen Sie die Chromoberflächen regelmäßig mit einem weichen Tuch und milder Seife oder einem nicht scheuernden Reiniger, der speziell für Chromarmaturen entwickelt wurde.
• Gründlich mit klarem Wasser abspülen und mit einem weichen Tuch trocknen, um Wasserflecken zu vermeiden.
• Nicht use abrasive sponges, scouring pads, or cleaners containing alcohol, ammonia, bleach, or phosphoric acid, as these can damage the chrome finish.

6.2. Wartung des Belüfters

Periodically unscrew the aerator at the tip of the spout to clean out any sediment or debris that may accumulate and restrict water flow. Rinse the aerator components under running water and reassemble.

7. Fehlerbehebung

8. Spezifikationen

• Modell: Hansa HANSAVANTIS Style, 54802107
• Marke: Hanse
• Farbe: Chrom
• Material: Brass (handle/lever)
• Installationsmethode: Wall Mount (for concealed body)
• Ausgussprojektion: 179 mm
• Maximale Wassertemperatur: +80°C
• Besondere Merkmale: Temperature Limiter, Adjustable Hot Water Stop, Thermostatic Regulation
• Produktabmessungen (L x B x H): 21 x 16.5 x 6 cm
• Gewicht: 1.2 kg

Abbildung 3: Flow Rate Diagram. This graph illustrates the water flow rate (Q in l/min or l/s) at various water pressures (kPa or bar) for the Hansa HANSAVANTIS Style tap.

9. Garantie und Support

Specific warranty information is not provided in the product data. For warranty details and technical support, please contact Hansa customer service or refer to the official Hansa webWebsite.