Wilo Star S33 FC Umwälzpumpe – Benutzerhandbuch

1. Produktüberschreitungview

The Wilo Star S 33 FC 230V/60Hz circulator pump is engineered for efficient fluid circulation in various heating systems. It features a robust cast iron housing and a three-speed motor, providing versatility for different application requirements.

This model is designed for quiet operation due to its wet rotor design, making it suitable for sound-sensitive installations. It includes a built-in, removable check valve for enhanced system control.

Hauptmerkmale:

• Cast iron housing with fixed flanges.
• Three-speed motor (Low/Medium/High) with a maximum head of 33 feet.
• Integrated, removable check valve.
• Suitable for radiant heating, hydronic heating, fan coil heating, and solar systems.
• Flüsterleiser Betrieb.
• Includes two gaskets (O-rings).
• UL/CSA listed for safety and compliance.

Abbildung 1: Vorderseite view of the Wilo Star S33 FC Circulating Pump, showing the control panel and specifications label.

2. Sicherheitshinweise

Lesen Sie vor Installation und Inbetriebnahme alle Anweisungen sorgfältig durch. Die Nichtbeachtung dieser Anweisungen kann zu Stromschlag, Brand oder schweren Verletzungen führen.

• Elektrische Sicherheit: Ensure power is disconnected before any installation, maintenance, or repair work. All electrical connections must be performed by a qualified electrician in accordance with local codes and regulations.
• Wassertemperatur: The pump is designed for a maximum water temperature of 230°F (110°C). Do not exceed this temperature.
• Druck: The maximum working pressure is 140 PSI. Do not exceed this pressure.
• Installationsumgebung: Install the pump in a dry, well-ventilated area. Protect from freezing temperatures.
• Flüssigkeitskompatibilität: This pump is suitable for water and glycol mixtures. Do not use with flammable or corrosive liquids.
• Non-Submersible: This pump is not submersible. Do not immerse in water.
• Do Not Run Dry: Operating the pump without fluid can cause severe damage. Ensure the system is properly filled and purged of air before starting the pump.

3. Einrichtung und Installation

3.1 Prüfungen vor der Installation

• Überprüfen Sie, ob das Volumen der Pumpetage (230V) matches the supply voltage.
• Ensure the installation location provides adequate space for maintenance and ventilation.
• Confirm that all necessary plumbing fittings and electrical components are available.

3.2 Montage der Pumpe

1. Position the pump in the system piping, ensuring the flow direction matches the arrow on the pump housing.
2. Use appropriate pipe wrenches to secure the pump flanges to the system piping. Do not overtighten.
3. Ensure the pump is installed horizontally with the motor shaft level to prevent air pockets and ensure proper lubrication.

3.3 Elektrischer Anschluss

WARNUNG: Electrical connections must be made by a qualified electrician. Disconnect power before proceeding.

1. Open the electrical terminal box on the pump.
2. Connect the 230V/60Hz power supply wires to the designated terminals (L1, L2, Ground) according to the wiring diagram inside the terminal box cover.
3. Stellen Sie sicher, dass alle Verbindungen sicher und ordnungsgemäß isoliert sind.
4. Close the terminal box cover securely to protect against moisture and dust.

Abbildung 2: Seite view of the Wilo Star S33 FC Circulating Pump, highlighting the electrical connection box and removable check valve.

4. Bedienungsanleitung

4.1 System Filling and Purging

Before starting the pump, ensure the heating system is completely filled with fluid and all air has been purged. Running the pump dry will cause damage.

4.2 Starten der Pumpe

1. Once the system is filled and purged, restore power to the pump.
2. The pump will begin operating at the selected speed setting.

4.3 Geschwindigkeitsstufen

The Wilo Star S33 FC features a three-speed motor. The speed can be adjusted using the selector switch on the pump's motor housing:

• Einstellung 1 (Niedrig): For systems requiring minimal flow or for quietest operation.
• Einstellung 2 (Mittel): A balanced setting for general applications.
• Einstellung 3 (Hoch): For systems requiring maximum flow and head pressure.

Select the speed setting that best matches your system's requirements to optimize performance and energy consumption.

5. Wartung

The Wilo Star S33 FC pump is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.

• Jährliche Inspektion: Annually inspect the pump for any signs of leaks, unusual noises, or vibrations.
• Systemflüssigkeitsqualität: Ensure the system fluid is clean and free of debris. Poor fluid quality can lead to premature wear.
• Rückschlagventil: The built-in check valve is removable for inspection or cleaning if necessary. Ensure power is off and the system is drained before attempting to remove it.
• Motorkühlung: Ensure the motor is not obstructed and has adequate ventilation for cooling.

Für komplexere Wartungs- oder Reparaturarbeiten empfiehlt es sich, einen qualifizierten Servicetechniker zu kontaktieren.

6. Fehlerbehebung

If the problem persists after attempting these solutions, please contact Wilo customer support or a qualified service professional.

7. Spezifikationen

8. Garantie und Support

For detailed warranty information and technical support, please refer to the official Wilo website or contact Wilo customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Wilo Contact Information:

• WebWebsite: www.wilo.com (Bitte prüfen Sie die regionalen Besonderheiten.) webSeiten)
• Kundendienst: Weitere Informationen finden Sie im webWebseite für Kontaktnummern und E-Mail-Support.