1. Einleitung
The Thermalright TL-S12 is a high-performance 120mm case fan designed for efficient PC cooling. It features automatic speed control via a 4-pin PWM connector, allowing the fan speed to adjust based on motherboard temperature, with a maximum speed of 1500 RPM. The fan is equipped with durable S-FDB (Fluid Dynamic Bearings) for quiet operation and extended lifespan. Its dual-sided ARGB lighting provides customizable aesthetic effects, synchronizing with compatible systems.
The Thermalright TL-S12 fan features a 120mm frame with ARGB lighting and a central Thermalright logo.
2. Lieferumfang
- 1x Thermalright TL-S12 120mm ARGB PWM Case Fan
3. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Technische Daten | 4.72 Zoll L x 0.98 Zoll B x 4.72 Zoll H |
| Marke | Thermoright |
| Typ des Stromanschlusses | 4-Pin PWM |
| Bandtage | 12 Volt (Lüfter), 5 Volt (ARGB) |
| Wastage | 1.8 Watt |
| Kühlmethode | Luft |
| Kompatible Geräte | Desktop-PCs |
| Geräuschpegel | 23.2 Dezibel |
| Lagertyp | Self-Lubricating Fluid Dynamic Bearing (S-FDB) |
| Maximale Drehzahl | 1500 U/min |
| Luftstromkapazität | 47.6 Kubikfuß pro Minute (CFM) |
| Artikelgewicht | 7.4 Unzen |
The fan's 7-blade airflow design ensures efficient cooling performance.
This image illustrates the fan's 7-blade airflow design, rated at 47.6 CFM at 1500 RPM, and its 4-pin PWM connector for automatic speed control.
4. Einrichtung und Installation
Proper installation ensures optimal cooling performance and longevity of your fan. Refer to the video guide below for a visual walkthrough.
Official installation guide for Thermalright case fans, demonstrating proper airflow direction, mounting with vibration-free mounts, securing with screws, and connecting to the motherboard.
Installationsschritte:
- Luftstromrichtung bestimmen: Observe the fan's design. The side with the fan blades visible (without the frame's structural supports) typically indicates the direction of airflow hinein the fan (intake). The side with the frame's structural supports indicates airflow aus of the fan (exhaust). For standard fans, the fan blade pushes air in, and the fan frame pushes air out. For reverse airflow fans (e.g., TL-C12R, TL-C12R-S, TL-C12RW-S), the airflow direction is reversed.
- Montage vorbereiten: For case fan mounting, use the provided vibration-free mounts. Insert one end of the mount through the fan mounting hole on your PC case.
- Sichere Halterungen: Pull the end of the vibration-free mount through the case hole until it is securely fastened. Repeat for all four mounting points.
- Montieren Sie den Lüfter: Align the fan with the secured vibration-free mounts on the case.
- Finalize Mount: Continue to pull the remaining end of each vibration-free mount through the fan's mounting holes to secure the fan firmly in place.
- Alternative Mounting (Screws): If using screws for mounting, align the fan with the desired mounting location on your PC case.
- Mit Schrauben befestigen: Use a screwdriver to fasten the screws through the fan's mounting holes and into the case. Ensure all four screws are tightened evenly to prevent vibration.
- Strom anschließen: Verbinden Sie das 4-polige PWM-Kabel des Lüfters mit einem freien 4-poligen Lüfteranschluss auf Ihrem Mainboard. Stellen Sie sicher, dass der Stecker vollständig eingesteckt ist.
- Connect ARGB (if applicable): Connect the fan's ARGB cable to a compatible 3-pin 5V ARGB header on your motherboard or ARGB controller.
The TL-S12 fan is versatile, suitable for use as a case fan, with air coolers, or on water cooling radiators to enhance system cooling.
5. Bedienungsanleitung
Once installed and connected, the Thermalright TL-S12 fan operates automatically:
- PWM-Steuerung: The 4-pin PWM connection allows your motherboard to automatically control the fan speed based on system temperature. This ensures optimal cooling performance when needed and quieter operation during lighter loads.
- ARGB-Beleuchtung: The integrated ARGB lighting will illuminate upon system power-on. If connected to a compatible motherboard or controller, you can customize lighting effects and synchronization through your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).
The fan features seamless dual-sided ARGB ring lighting, adding aesthetic appeal to your PC build.
6. Wartung
The Thermalright TL-S12 fan is designed for low maintenance due to its S-FDB bearing. However, regular cleaning is recommended to ensure optimal performance.
- Reinigung: Reinigen Sie die Lüfterflügel und das Gehäuse regelmäßig mit Druckluft oder einer weichen Bürste, um Staubablagerungen zu entfernen. Stellen Sie sicher, dass das System vor der Reinigung ausgeschaltet ist.
- Lager: The S-FDB bearing is maintenance-free. Do not attempt to disassemble the fan, as this may damage the bearing and void any potential warranty.
- Vibrationsmatten: Ensure the silicone rubber pads on the fan corners are intact to minimize vibration and noise.
The fan incorporates soft-touch silicone rubber pads for vibration absorption and a durable S-FDB (Fluid Dynamic Bearing) for stable, low-noise operation.
Equipped with a high-durability S-FDB (Fluid Dynamic Bearing), the fan motor ensures low-friction, low-noise operation and a long service life.
7. Fehlerbehebung
If you encounter issues with your Thermalright TL-S12 fan, refer to the following common troubleshooting steps:
- Lüfter dreht sich nicht:
- Stellen Sie sicher, dass der 4-polige PWM-Anschluss fest mit dem Lüfteranschluss auf dem Motherboard verbunden ist.
- Check your motherboard's BIOS/UEFI settings to ensure the fan header is enabled and configured correctly (e.g., not set to 'disabled' or a very low RPM profile).
- Test the fan on a different fan header or with a fan tester if available, to rule out a faulty fan header.
- Keine ARGB-Beleuchtung:
- Verify the ARGB cable is correctly connected to a 3-pin 5V ARGB header on your motherboard or controller. Do not connect to a 4-pin 12V RGB header, as this can damage the LEDs.
- Ensure your motherboard's ARGB software is installed and configured to control the lighting.
- Check for any physical damage to the ARGB cable or connector.
- Übermäßiger Lärm/Vibration:
- Ensure the fan is securely mounted and all screws/vibration-free mounts are properly tightened.
- Prüfen Sie, ob Kabel oder andere Hindernisse die Lüfterflügel berühren.
- Clean any dust buildup on the fan blades, as uneven dust distribution can cause imbalance and noise.
- If the noise persists and is a grinding or rattling sound, the bearing may be faulty. Contact support if the fan is still under warranty.
8. Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen Thermalright-Website. webBesuchen Sie unsere Website oder kontaktieren Sie Ihren Händler. Bewahren Sie Ihren Kaufbeleg für Garantieansprüche auf.
