Einführung
This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your Dapper Supply Battery Powered Floor Scrubber. Designed for effective floor care, this machine features a wide 20-inch cleaning path and large capacity solution and recovery tanks. It is powered by a 3/4 peak horsepower brush motor offering 220 RPM, incorporating soft-start technology for extended lifespan. Please read this manual thoroughly before initial use.
Hauptmerkmale
- Kraftvolle Reinigung: 220 RPM brush speed for efficient cleaning performance.
- Großtanks: 13-gallon solution tank and 14.5-gallon recovery tank for prolonged cleaning sessions.
- Wide Squeegee Coverage: Equipped with a 32-inch squeegee for effective water and solution recovery.
- Doppeltes Batteriesystem: Includes two 12V batteries, providing a 4.5-hour runtime per charge.
- Schnelles Laden: Fully charges in just 6 hours, minimizing downtime.
- Umfangreiches Zubehör: Comes with a scrub brush, pad driver, and a set of 3 scouring pads.
- Umfassende Abdeckung: Capable of cleaning up to 23,000 sq. ft. per hour.
- Kompakte Abmessungen: Product dimensions are 51 inches x 31 inches x 43.5 inches.
Aufstellen
1. Auspacken und Inspektion
Carefully remove all components from the packaging. Inspect the machine for any signs of damage that may have occurred during shipping. Report any damage to Dapper Supply immediately.
2. Batterieeinbau und Erstladung
The floor scrubber comes with two 12V batteries. Ensure they are properly installed in the designated battery compartment. For initial use, fully charge the batteries for approximately 6 hours. Refer to the charging port location for connection.
Image: Open battery compartment showing the two 12V batteries.
3. Attaching the Scrub Brush and Pad Driver
Attach the scrub brush or the pad driver with the appropriate scouring pad to the underside of the machine. Ensure it is securely fastened before operation.
Bild: Vorderseite view of the scrubber, highlighting the brush assembly.
4. Befüllen des Lösungstanks
Locate the 13-gallon solution tank. Fill it with clean water and an appropriate, non-foaming floor cleaning solution as recommended for your floor type. Do not overfill.
Image: Solution tank fill port.
Bedienungsanleitung
1. Starten der Maschine
Ensure the machine is fully charged and the solution tank is filled. Grip the starting handle firmly. The control panel is located on the handle for easy access to power and brush controls.
Image: Control panel and starting handle.
2. Reinigungsprozess
Engage the brush motor and solution flow. Guide the scrubber across the floor in overlapping passes. The 220 RPM brush speed ensures thorough scrubbing, while the 32-inch squeegee efficiently recovers dirty water into the 14.5-gallon recovery tank.
Video: Demonstration of the Dapper Supply Battery Powered Floor Scrubber in operation, showing its efficient cleaning and water recovery capabilities.
3. Dirty Water Disposal
Once cleaning is complete or the recovery tank is full, locate the dirty water outlet to drain the collected water. Dispose of dirty water according to local regulations.
Image: Dirty water outlet hose.
Wartung
1. Laden des Akkus
After each use, connect the scrubber to the charger. A full charge takes approximately 6 hours. Do not overcharge the batteries. Store the machine in a cool, dry place when not in use.
2. Tankreinigung
Regularly clean both the solution and recovery tanks to prevent residue buildup and maintain hygiene. Rinse thoroughly with clean water after each use.
3. Brush and Squeegee Inspection
Inspect the scrub brush and squeegee blades regularly for wear and tear. Replace them as needed to ensure optimal cleaning performance and water recovery.
Image: Squeegee assembly.
Fehlerbehebung
| Problem | Mögliche Ursache | Lösung |
|---|---|---|
| Das Gerät lässt sich nicht einschalten. | Low battery charge; Power switch off; Loose battery connection. | Charge batteries; Turn on power switch; Check battery connections. |
| Mangelhafte Reinigungsleistung. | Worn brush/pad; Incorrect solution concentration; Clogged solution nozzle. | Replace brush/pad; Adjust solution; Clean nozzle. |
| Water not being recovered. | Worn squeegee blades; Recovery tank full; Clogged recovery hose. | Replace squeegee blades; Empty recovery tank; Clear hose. |
Technische Daten
- Marke: Dapper Supply
- Modellnummer: DP-WBFS1200
- Bürstengeschwindigkeit: 220 U/min
- Fassungsvermögen des Lösungstanks: 13 Gallonen
- Kapazität des Rückgewinnungstanks: 14.5 Gallonen
- Abzieherbreite: 32 Zoll
- Batteriesystem: Dual 12V batteries (included)
- Ladezeit: Ungefähr 6 Stunden
- Laufzeit: 4.5 Stunden pro Ladung
- Reinigungsabdeckung: Up to 23,000 sq. ft. per hour
- Produktabmessungen: 51 x 31 x 43.5 Zoll
- Enthaltene Komponenten: Pad Driver, Scrub Brush, Set of 3 Scouring Pads
- Material: Plastik
- Farbe: Weiß
- Energiequelle: Batteriebetrieben
- GTIN: 00860010434611
Garantie und Support
Your Dapper Supply Floor Scrubber is covered by a 3 Jahr Herstellergarantie. This warranty protects your purchase against manufacturing defects or malfunctions. For warranty claims, technical support, or any inquiries, please contact Dapper Supply customer service. Refer to the product packaging or the official Dapper Supply webDie aktuellsten Kontaktinformationen finden Sie auf dieser Webseite.
Weitere Informationen finden Sie im Dapper Supply Store.
