1. Einleitung
This manual provides detailed instructions for the installation, operation, and maintenance of your Thermalright Aqua Elite 360 V3 Water Cooling CPU Cooler. Please read this guide thoroughly before installation to ensure proper setup and optimal performance.
2. Produktmerkmale
- Bessere Kühlung: Features a fourth-generation pump head, 360mm black aluminum fin heat sink plate, protective mesh water pipes, and three 120mm ARGB fans with S-FDB bearings for low vibration, high heat dissipation, low evaporation, and extended lifespan.
- Einzigartiger Pumpenkopf: Octagonal-shaped cold pump head with a swirling rectangle design and ARGB halo lighting. Offers a lifespan of up to 40,000 hours and a rotation speed of up to 3,300 RPM ± 10% for excellent CPU heat dissipation.
- Excellent LED Lighting Effect: Fans and water-cooling header ARGB sync with 5V 3-pin motherboard headers for 16 million color soft light effects. Supports light effect series and motherboard sync to prevent insufficient light interfaces.
- Fan Parameters: Equipped with three TL-C12B-S V2 fans (120x120x25mm). Speed: 1500RPM ± 10%, Noise: ≤23dBA, Airflow: 66.17CFM (MAX). Features 4PIN PWM and 5V/3PIN ARGB interfaces, allowing automatic speed adjustment based on CPU temperature and manual ARGB color adjustment.
- Bequeme Installation: AIO cooler compatibility for AMD (AM4/AM5) and Intel (LGA1150/1151/1155/1156/1200/2011/2066/1700) sockets. Includes all necessary accessories and clear instructions for simple installation.
3. Packungsinhalt
The Thermalright Aqua Elite 360 V3 Water Cooling CPU Cooler package includes:
- Liquid CPU Cooler (Radiator with 3 fans, pump/waterblock assembly)
- Montagehardware für AMD AM4/AM5-Sockel
- Mounting hardware for Intel LGA1150/1151/1155/1156/1200/2011/2066/1700 sockets
- Thermal compound syringe
- Fan PWM splitter cable
- ARGB lighting sync cable
- Bedienungsanleitung
4. Installationsanleitung
The following video provides a comprehensive guide for installing the Thermalright Aqua Elite 360 V3 on both AMD AM4/AM5 and Intel LGA1700 platforms. Please follow the steps carefully.
4.1. Allgemeine Vorbereitung
- Ensure your system is powered off and unplugged from the wall outlet.
- Refer to your motherboard manual for specific CPU fan header locations and clearances.
- Benötigtes Werkzeug bereithalten: Kreuzschlitzschraubendreher.
4.2. Kühlerinstallation
- Kühler montieren: Install the radiator onto your PC case using the short radiator screws. Ensure the fan exhaust side is adjusted according to your case's airflow strategy.
4.3. Kabelverbindungen
- Connect Fan PWM Cable: Connect the fan PWM cable to the fan splitter cable for fan speed synchronization. Then, connect the fan PWM splitter cable to the CPU_FAN socket on your motherboard to power the fans.
- Connect ARGB Lighting Cable: Connect the ARGB lighting cable to the motherboard's 3-pin 5V ARGB socket for lighting control.
- Connect Pump Power Cable: Connect the pump power cable to the CPU_OPT or AIO_PUMP socket on your motherboard.
5. Bedienung
Once installed and powered on, the Thermalright Aqua Elite 360 V3 will automatically begin cooling your CPU. The PWM function allows the fan speed to adjust automatically based on CPU temperature, optimizing for both cooling performance and noise levels. The ARGB lighting can be controlled via your motherboard's compatible software, allowing for customization of lighting effects and colors.
6. Wartung
- Staubreinigung: Reinigen Sie die Kühlrippen und Lüfterflügel des Kühlers regelmäßig mit Druckluft von Staub. Achten Sie darauf, dass die Lüfter während der Reinigung nicht laufen.
- Schläuche prüfen: Regularly check the water tubes for any signs of leaks, kinks, or damage.
- Leistung überwachen: Use monitoring software to keep track of CPU temperatures and pump/fan speeds to ensure optimal performance.
- Wärmeleitpaste: Reapply thermal paste if you ever need to remove and reinstall the waterblock.
7. Fehlerbehebung
- Hohe CPU-Temperaturen:
- Check if the waterblock is securely mounted to the CPU.
- Ensure thermal paste is correctly applied.
- Verify that the pump is running (check connections to CPU_OPT/AIO_PUMP header).
- Prüfen Sie, ob die Lüfter laufen und an den CPU_FAN-Anschluss angeschlossen sind.
- Entfernen Sie jeglichen Staub von den Kühlrippen des Kühlers.
- Lüfter drehen sich nicht/ARGB leuchtet nicht:
- Überprüfen Sie alle Lüfter- und ARGB-Kabelverbindungen zum Motherboard.
- Ensure the motherboard's ARGB header is enabled in BIOS/UEFI or controlled by appropriate software.
- Verify power supply connections.
- Ungewöhnliches Geräusch:
- Check for loose fan screws or vibrations.
- Stellen Sie sicher, dass keine Kabel die Lüfterflügel behindern.
- If pump noise is excessive, ensure it's properly mounted and not running dry (though this is rare for AIOs).
8. Spezifikationen
| Besonderheit | Spezifikation |
|---|---|
| Technische Daten | 4.72 Zoll L x 0.98 Zoll B x 4.72 Zoll H |
| Marke | Thermoright |
| Typ des Stromanschlusses | 4-polig |
| Bandtage | 5 Volt |
| Wastage | 2.64 Watt |
| Kühlmethode | Wasser |
| Kompatible Geräte | Desktop |
| Geräuschpegel | 23 Dezibel |
| Maximale Drehzahl | 1800 U/min |
| Luftstromkapazität | 66.17 Kubikfuß pro Minute |
| Artikelgewicht | 4.89 Pfund |
| Artikelmodellnummer | AQUA ELITE 360 V3 |
9. Garantie und Support
Informationen zur Garantie und zum technischen Support finden Sie auf der offiziellen Thermalright-Website. webBesuchen Sie die Website oder kontaktieren Sie direkt den Kundenservice. Bewahren Sie Ihren Kaufbeleg als Kaufnachweis für eventuelle Garantieansprüche auf.
Offizieller Thermalright WebWebsite: www.thermalright.com
