SHARPAL 198H Elektrischer Messerschärfer – Benutzerhandbuch

1. Einleitung

Thank you for choosing the SHARPAL 198H Electric Knife Sharpener. This professional 3-stage sharpening system is designed to bring a razor-sharp edge to most straight-edge and serrated knives. Featuring durable diamond abrasive discs and a user-friendly design, it ensures efficient and consistent sharpening results right in your kitchen. Its low-noise operation and integrated metal filing collection system make maintenance simple and convenient.

This manual provides detailed instructions for safe operation, setup, sharpening techniques, and maintenance to help you get the most out of your new sharpener.

2. Sicherheitshinweise

Please read all safety instructions carefully before using the sharpener. Failure to follow these instructions may result in electric shock, fire, or serious injury.

• Always unplug the sharpener from the power outlet when not in use, before cleaning, or before performing any maintenance.
• Do not immerse the sharpener, power cord, or plug in water or any other liquid.
• Keep the sharpener out of reach of children and pets.
• Use the sharpener on a stable, flat, and dry surface to prevent tipping.
• Do not operate the sharpener with a damaged cord or plug, or if the appliance malfunctions or has been damaged in any manner. Contact customer support for assistance.
• Always pull the knife blade slowly and steadily through the sharpening slots. Do not push or force the blade.
• Keep fingers and hands away from the sharpening slots during operation.
• Be extremely careful when handling sharpened knives, as they will be very sharp.
• Dieses Gerät ist nur für den Hausgebrauch bestimmt. Verwenden Sie es nicht für gewerbliche oder industrielle Zwecke.

3. Packungsinhalt

Überprüfen Sie, ob alle Artikel im Paket vorhanden sind:

• SHARPAL 198H Electric Knife Sharpener
• AC to DC 12V Power Adapter

4. Produktüberschreitungview

The SHARPAL 198H features a 3-stage sharpening system designed for optimal results.

Abbildung 4.1: Vorderseite view of the SHARPAL 198H Electric Knife Sharpener, showing the power switch and the three distinct sharpening slots.

Figure 4.2: Detailed diagram illustrating the three sharpening stages (1, 2, 3) and the overall dimensions of the sharpener. Stage 1 is for coarse sharpening, Stage 2 for fine honing, and Stage 3 for ceramic refining and serrated knives.

• Stage 1 (Coarse): Equipped with a 325 grit (45 micron) electric-powered diamond wheel. This stage is for setting the initial edge on very dull or damaged straight-edge blades.
• Stage 2 (Fine): Features a 1000 grit (15 micron) electric-powered diamond wheel. This stage hones and refines the edge, preparing it for the final polishing.
• Stage 3 (Ceramic): A manual V-slot with ceramic abrasives. This stage is used for quick touch-ups, polishing the edge, and is the only stage suitable for sharpening serrated knives.
• Removable Magnetic Receptacles: Located at the bottom of the sharpener, these receptacles collect metal filings for easy cleanup.

Abbildung 4.3: Ein interner view of the sharpener, highlighting the spindle sharpening wheel design for minimal metal removal and the removable magnetic receptacles for collecting metal shavings.

5. Einrichtung

1. Place the SHARPAL 198H Electric Knife Sharpener on a stable, flat, and dry surface. Ensure there is enough space around the sharpener for safe operation.
2. Connect the AC to DC 12V power adapter to the sharpener's power input port.
3. Stecken Sie das Netzteil in eine normale Steckdose.
4. Flip the power switch to the 'ON' position. The indicator light will illuminate, and the sharpening wheels will begin to rotate quietly.

6. Bedienungsanleitung

Allgemeine Schärftipps:

• Always clean your knife blade thoroughly before sharpening.
• Apply light, consistent downward pressure on the blade as you pull it through the slot. Do not press too hard.
• Pull the knife slowly and steadily from the heel to the tip through the sharpening slot. Maintain a consistent speed.
• The sharpener is designed with pre-set sharpening angles (20 degrees) for optimal results. You do not need to adjust the angle.
• For double-bevel knives, the sharpener simultaneously sharpens both sides of the edge, saving time and ensuring even sharpening.

Sharpening Straight-Edge Knives:

For best results, follow the 3-stagDer Prozess:

Figure 6.1: Proper technique for sharpening a straight-edge knife using the SHARPAL 198H, demonstrating the smooth pull through the sharpening slot.

1. Stage 1 (Coarse Sharpening):
   • Use this stage for very dull, damaged, or newly acquired knives.
   • Insert the heel of the knife blade into the left slot of Stage 1.
   • Pull the knife slowly and steadily towards you, from heel to tip, maintaining light downward pressure.
   • Repeat this process 5-10 times, or until a burr (a slight ridge of metal) forms along the edge.
2. Stage 2 (Fine Honing):
   • Nach S bewegentage 2 for honing and refining the edge created in Stage 1.
   • Insert the heel of the knife blade into the left slot of Stage 2.
   • Pull the knife slowly and steadily towards you, from heel to tip, maintaining light downward pressure.
   • Repeat this process 5-10 times. This will remove the burr and further sharpen the blade.
3. Stage 3 (Ceramic Polishing):
   • Dies isttage is for final polishing and quick touch-ups.
   • Insert the heel of the knife blade into the left slot of Stage 3.
   • Pull the knife slowly and steadily towards you, from heel to tip, maintaining light downward pressure.
   • Wiederholen Sie diesen Vorgang 3-5 mal.

Sharpening Serrated Knives:

Verwenden Sie nur Stage 3 for serrated knives. Verwenden von Stages 1 or 2 on serrated blades can damage the sharpener and the knife.

1. Insert the heel of the serrated knife blade into the left slot of Stage 3.
2. Pull the knife slowly and steadily towards you, from heel to tip, maintaining light downward pressure.
3. Repeat this process 5-10 times, focusing on sharpening each individual serration.

After Sharpening:

• Carefully wipe the sharpened blade with a damp Tuch, um eventuelle Metallspäne zu entfernen.
• Test the sharpness of your knife on a piece of paper or a tomato. A properly sharpened knife should slice cleanly without tearing.

Figure 6.2: Visual comparison of a knife's performance before and after sharpening, demonstrating improved slicing ability on a tomato and a refined blade edge.

7. Wartung

Cleaning the Sharpener:

The SHARPAL 198H is designed with removable magnetic receptacles to collect metal filings, making cleanup easy.

1. Stellen Sie sicher, dass der Anspitzer vom Stromnetz getrennt ist.
2. Locate the magnetic receptacles on the underside of the sharpener.
3. Carefully slide out the receptacles.
4. Empty any collected metal filings into a waste bin.
5. Wipe the receptacles clean with a dry cloth.
6. Slide the receptacles back into their slots until they click into place.
7. Wipe the exterior of the sharpener with a dry or slightly damp Mit einem Tuch abwischen. Keine Scheuermittel verwenden und das Gerät nicht in Wasser tauchen.

Lagerung:

Store the sharpener in a cool, dry place, away from direct sunlight and moisture. Keep it out of reach of children.

8. Fehlerbehebung

If you encounter any issues with your SHARPAL 198H Electric Knife Sharpener, refer to the following common problems and solutions:

• Problem: The sharpener does not turn on.
  • Lösung: Ensure the power adapter is securely plugged into both the sharpener and a working electrical outlet. Check if the power switch is in the 'ON' position.
• Problem: Die Messer werden nicht scharf.
  • Lösung: Ensure you are pulling the knife slowly and steadily through the slots. Apply light, consistent downward pressure. For very dull knives, ensure you are starting with Stage 1 and progressing through Stage 2 und dann Stage 3. Ensure the blade is clean before sharpening.
• Problem: Übermäßiger Lärm während des Betriebs.
  • Lösung: The SHARPAL 198H is designed for low-noise operation (below 65 dB). If you experience unusually loud or grinding noises, unplug the unit immediately and contact customer support.
• Problem: Metal filings are not being collected.
  • Lösung: Ensure the magnetic receptacles are properly inserted and seated at the bottom of the sharpener.

If the problem persists after trying these solutions, please contact SHARPAL customer support for further assistance.

9. Spezifikationen

Abbildung 9.1: Vergrößert views illustrating the consistent grit sizes of the monocrystalline diamonds used in the sharpener's wheels.

10. Garantie und Support

The SHARPAL 198H Electric Knife Sharpener comes with a 3 Jahr Garantie, ensuring quality and performance. For warranty claims, technical support, or any inquiries regarding your product, please contact SHARPAL customer support directly.

Bitte bewahren Sie Ihren Kaufbeleg für Garantiezwecke auf.